Web Gui - stopped working - dial tcp: lookup omv on 127.0.0.1:53: no such host

    • macom wrote:

      I also think it is confusing, that there is "5.0.1beta" and "5.0.5" without beta.
      That is because Volker wasn't sure if that would end up being the stable release and removing beta from 5.0.5 if it was the stable release would also be confusing. There was never any doubt whether 5.0.1 was a beta.

      mrpg wrote:

      how do we work that out?
      openmediavault.readthedocs.io/en/latest/releases.html
      omv 4.1.23 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.15
      omv-extras.org plugins source code and issue tracker - github

      Please read this before posting a question and this and this for docker questions.
      Please don't PM for support... Too many PMs!
    • mrpg wrote:

      and i cant even open the web gui, its just telling me "loading please wait"
      Sounds like engined isn't running. What is the output of: systemctl status openmediavault-engined
      omv 4.1.23 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.15
      omv-extras.org plugins source code and issue tracker - github

      Please read this before posting a question and this and this for docker questions.
      Please don't PM for support... Too many PMs!
    • hello,

      ok i am back again :)

      i have finally had time to install debian 9.9, then install the intel e1000e driver, and then omv 4

      when i first installed, i could access the web gui, i saw that my md127 raid was resyncing, so i left it to resync over night.

      this morning, i get to the login page of the web gui, i enter my username & password, and i am back at the "loading please wait screen"

      i can login through ssh without ptoblems, i i have zero load on cpu & zero activity on my disks.

      how do i progress from here?

      Please help.

      Best Regards
      Patric

      Source Code

      1. root@pgnas:~# systemctl status openmediavault-engined
      2. ● openmediavault-engined.service - The OpenMediaVault engine daemon that processes the RPC request
      3. Loaded: loaded (/lib/systemd/system/openmediavault-engined.service; enabled; vendor preset: enabled)
      4. Active: active (running) since Sun 2019-09-08 07:59:39 BST; 17min ago
      5. Main PID: 907 (omv-engined)
      6. Tasks: 1 (limit: 4915)
      7. CGroup: /system.slice/openmediavault-engined.service
      8. └─907 omv-engined
      9. Sep 08 07:59:39 pgnas systemd[1]: Starting The OpenMediaVault engine daemon that processes the RPC request...
      10. Sep 08 07:59:39 pgnas systemd[1]: openmediavault-engined.service: Supervising process 907 which is not our chi
      11. Sep 08 07:59:39 pgnas systemd[1]: Started The OpenMediaVault engine daemon that processes the RPC request.
      Display All

      The post was edited 1 time, last by mrpg ().

    • Hi,

      So grateful for all the help so far! , you were right @ryecoaaron , my md127 raid 5, works perfectly in my new nas pc!

      But the webgui / engined seems to crash or stop functioning , i can access the web gui for a few minutes, and then it stops responfing, i have to :

      Source Code

      1. systemctl restart openmediavault-engined
      to get it going again, it seems to happen really frequently.

      please let me know of any info you want me to provide in order to help me fix this.

      Many thanks in advanced.

      Best Regards
      Patric
    • As root:

      monit stop omv-engined
      omv-engined -df

      Then browse web interface until it crashes. The error should be on the console. Post that error.
      omv 4.1.23 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.15
      omv-extras.org plugins source code and issue tracker - github

      Please read this before posting a question and this and this for docker questions.
      Please don't PM for support... Too many PMs!
    • New

      Hi,

      I sat and configure my omv yesterday for probably an hour, its no longer crashing :) , so we can ignore that issue!

      However, i added another 5x disks and setup as raid 5, created a shared folder, and created an nfs share.

      however, the bind mount does not seem to work?

      Source Code

      1. root@pgnas:~# lsblk
      2. NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
      3. sda 8:0 0 1.8T 0 disk
      4. └─md126 9:126 0 7T 0 raid5 /srv/dev-disk-by-label-ssdraid5
      5. sdb 8:16 0 1.8T 0 disk
      6. └─md126 9:126 0 7T 0 raid5 /srv/dev-disk-by-label-ssdraid5
      7. sdc 8:32 0 1.8T 0 disk
      8. └─md126 9:126 0 7T 0 raid5 /srv/dev-disk-by-label-ssdraid5
      9. sdd 8:48 0 1.8T 0 disk
      10. └─md126 9:126 0 7T 0 raid5 /srv/dev-disk-by-label-ssdraid5
      11. sde 8:64 0 1.8T 0 disk
      12. └─md126 9:126 0 7T 0 raid5 /srv/dev-disk-by-label-ssdraid5
      Display All




      md126 is the new mdraid


      Source Code

      1. root@pgnas:~# df -h
      2. Filesystem Size Used Avail Use% Mounted on
      3. udev 16G 0 16G 0% /dev
      4. tmpfs 3.2G 26M 3.2G 1% /run
      5. /dev/mapper/pgnas--vg-root 202G 5.9G 186G 4% /
      6. tmpfs 16G 0 16G 0% /dev/shm
      7. tmpfs 5.0M 0 5.0M 0% /run/lock
      8. tmpfs 16G 0 16G 0% /sys/fs/cgroup
      9. tmpfs 16G 0 16G 0% /tmp
      10. /dev/nvme0n1p2 237M 68M 157M 31% /boot
      11. /dev/nvme0n1p1 511M 132K 511M 1% /boot/efi
      12. /dev/md127 8.2T 7.5T 699G 92% /srv/dev-disk-by-label-pgnas2
      13. tmpfs 3.2G 0 3.2G 0% /run/user/0
      14. /dev/md126 7.0T 53G 7.0T 1% /srv/dev-disk-by-label-ssdraid5
      Display All
      its mounted in /srv/dev-disk-by-label-ssdraid5

      and i can see my files :


      Source Code

      1. root@pgnas:~# ls /srv/dev-disk-by-label-ssdraid5/
      2. utils stuff trash

      in /etc/exports :



      Source Code

      1. root@pgnas:~# cat /etc/exports
      2. # This configuration file is auto-generated.
      3. # WARNING: Do not edit this file, your changes will be lost.
      4. #
      5. # /etc/exports: the access control list for filesystems which may be exported
      6. # to NFS clients. See exports(5).
      7. /export/pgnas 192.168.0.0/24(fsid=1,rw,subtree_check,insecure)
      8. /export/zfs 192.168.0.0/24(fsid=2,rw,subtree_check,insecure)
      9. # NFSv4 - pseudo filesystem root
      10. /export 192.168.0.0/24(ro,fsid=0,root_squash,no_subtree_check,hide)
      my fstab :


      Source Code

      1. root@pgnas:~# cat /etc/fstab
      2. # /etc/fstab: static file system information.
      3. #
      4. # Use 'blkid' to print the universally unique identifier for a
      5. # device; this may be used with UUID= as a more robust way to name devices
      6. # that works even if disks are added and removed. See fstab(5).
      7. #
      8. # <file system> <mount point> <type> <options> <dump> <pass>
      9. /dev/mapper/pgnas--vg-root / ext4 errors=remount-ro 0 1
      10. # /boot was on /dev/nvme0n1p2 during installation
      11. UUID=7d08fae3-6dee-4647-b4a9-0687bc46b07b /boot ext2 defaults 0 2
      12. # /boot/efi was on /dev/nvme0n1p1 during installation
      13. UUID=E6DF-12B7 /boot/efi vfat umask=0077 0 1
      14. /dev/mapper/pgnas--vg-swap_1 none swap sw 0 0
      15. tmpfs /tmp tmpfs defaults 0 0
      16. # >>> [openmediavault]
      17. /dev/disk/by-label/pgnas2 /srv/dev-disk-by-label-pgnas2 ext4 defaults,nofail,user_xattr,noexec,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,acl 0 2
      18. /dev/disk/by-label/ssdraid5 /srv/dev-disk-by-label-ssdraid5 xfs defaults,nofail,noexec,usrquota,grpquota,discard,inode64 0 2
      19. /srv/dev-disk-by-label-pgnas2/pgnas /export/pgnas none bind,nofail 0 0
      20. /srv/dev-disk-by-label-ssdraid5/zfs /export/zfs none bind,nofail 0 0
      21. # <<< [openmediavault]
      Display All


      i can see that it should bind mount to /export/zfs

      but if i do an ls /export/zfs i cannot see any files

      i have manually unmounted & mounted the /export/zfs directory, but its still blank.

      can anyone help with this?

      Br
      Patric
    • New

      hi again ryecoaaron , many thanks for helping out again!

      Source Code

      1. root@pgnas:~# grep export /proc/mounts
      2. /dev/md127 /export/pgnas ext4 rw,noexec,relatime,stripe=384,data=ordered,jqfmt=vfsv0,usrjquota=aquota.user,grpjquota=aquota.group 0 0
      3. /dev/md126 /export/zfs xfs rw,noexec,relatime,attr2,discard,inode64,sunit=1024,swidth=4096,usrquota,grpquota 0 0
    • New

      That doesn't make much sense. I would guess it is a permissions issue but you are running the commands as root. After a reboot, you still can't see any files in /export/zfs?
      omv 4.1.23 arrakis | 64 bit | 4.15 proxmox kernel | omvextrasorg 4.1.15
      omv-extras.org plugins source code and issue tracker - github

      Please read this before posting a question and this and this for docker questions.
      Please don't PM for support... Too many PMs!
    • Users Online 3

      3 Guests