Hi all,
First, I am very new here so I apologies in advance for any screw ups in protocol or stupid questions. I was successfully able to install the OMV_4_Raspberry_Pi_2_3_3Plus_4.img.xz onto a Pi 3B+ with no issues (although Etcher is always giving a checksum error on the verification) so I went out and purchased a Pi 4 because I really wanted the USB 3 capability. I was unable to simply burn the image using Etcher as I had done on the Pi 3B+ , I would get the four flashing green lights implying a boot loader issue that was not going to go away. After taking a clean image and updating on the Pi 3B+ I was able to move it over to the Pi 4 successfully and get it up and running. Here is my issue. First USB 3.0 drive hooked up works fine. Mounts, shares, security, all good. When I attempt to place a second, similar drive, on the second USB 3.0 port, it appears to see them as two identical drives. While they show up with unique identifiers under “Disks”, when mounted, they show up in the “File” menu as the same. I know it is confused because the second drive can not be unmounted any longer since the system is confusing the two drives. Am I missing something? Can the Pi 4/OMV treat the two drives independently? Ideally, I would like to be able to hang two drives off each Pi 4.
Thanks,
Barry