Hi All,
Still very new to this but super happy with this set up so far. I have a Pi 4 running the latest OMV 4 image running two USB 3 8TB drives. I used Etcher to burn the image and after some screwing around finally got things to boot on the Pi 4. The image was burned onto a 32 gig SD card and I am not familiar enough with Linux to understand if their is a way to recover the remaining 24 gig from the partition. This is what I see right now when I go into the File System. The system does see the full 32 gig under Disks. I did try searching, however, if I could just get pointed in the right direction I would greatly appreciate it! If I should have used an alternative to Etcher, please let me know.