rpi 4

    • Works fine. Just download the image, flash a good quality >= 16GB SD card and install.

      Make sure the RPi has access to the internet, using a network cable, during the whole installation process.

      It may also be prudent to NOT have keyboard, mouse, screen and any external storage connected during the installation. It is not needed and may cause power problems.

      After a while you can connect to your new OMV NAS using the web GUI from the web browser on some other computer in the same network. Use the url raspberrypi.local or, if that doesn't work, login to your DHCP-server to see what IP the RPi 4 received.

      Then update and reboot.

      And then you are running the latest stable version of OMV for RPi 4. Ready to configure for your needs.

      It seems the RPi 4 gets a bit warm running OMV, even when idle. Some cooling might improve performance and stability. I use a FLIRC case.
      OMV 4: 7 x Odroid HC2 + 1 x HC1 + 2 x RPi4

      The post was edited 1 time, last by Adoby ().

    • Any idea how long the initial setup should take on the RPI4? I've let mine sit for the past couple hours, plugged into ethernet, and when I login, there is no option for wifi, it isn't even detecting that the RPI4 has wifi, only eth0 and lo. Any ideas? Am I not waiting long enough for the initial setup?
    • dalepmay wrote:

      Any idea how long the initial setup should take on the RPI4?
      About 30 mins with an active internet connection.

      dalepmay wrote:

      there is no option for wifi, it isn't even detecting that the RPI4 has wifi, only eth0 and lo.
      ?( how have you checked this, and why wifi, my past experience of a Pi's wifi is about as useful as a chocolate teapot, and for anything that is going to serve a network ethernet is way more stable and reliable.
      Raid is not a backup! Would you go skydiving without a parachute?
    • Lor3 wrote:

      Do you recommend raid on Rpi 4 ?
      No no no no no!! The option to use USB drives has been removed in OMV, but the number of you tube 'gurus' who set up a raid on a pi is unbelievable. Raid is not necessary for home use, use two externally powered drives, use one for the data and the other as a backup using rsync or rsnapshot.
      Raid is not a backup! Would you go skydiving without a parachute?
    • geaves wrote:

      Lor3 wrote:

      Do you recommend raid on Rpi 4 ?
      No no no no no!! The option to use USB drives has been removed in OMV, but the number of you tube 'gurus' who set up a raid on a pi is unbelievable. Raid is not necessary for home use, use two externally powered drives, use one for the data and the other as a backup using rsync or rsnapshot.
      duh? it means i cant connect box with drives via usb to rpi?
    • Adoby wrote:

      Works fine. Just download the image, flash a good quality >= 16GB SD card and install.

      Make sure the RPi has access to the internet, using a network cable, during the whole installation process.

      It may also be prudent to NOT have keyboard, mouse, screen and any external storage connected during the installation. It is not needed and may cause power problems.

      After a while you can connect to your new OMV NAS using the web GUI from the web browser on some other computer in the same network. Use the url raspberrypi.local or, if that doesn't work, login to your DHCP-server to see what IP the RPi 4 received.

      Then update and reboot.

      And then you are running the latest stable version of OMV for RPi 4. Ready to configure for your needs.

      It seems the RPi 4 gets a bit warm running OMV, even when idle. Some cooling might improve performance and stability. I use a FLIRC case.
      what image? thanks
    • after installing from image ... and execution of upgrade via gui ... now i typed in console
      apt-get update:


      Hit:16 cdn-fastly.deb.debian.org/debian stretch Release
      Exception ignored in: <function WeakValueDictionary.__init__.<locals>.remove at 0xb6314390>
      Traceback (most recent call last):
      File "/usr/lib/python3.5/weakref.py", line 117, in remove
      TypeError: 'NoneType' object is not callable
      Exception ignored in: <function WeakValueDictionary.__init__.<locals>.remove at 0xb6314390>
      Traceback (most recent call last):
      File "/usr/lib/python3.5/weakref.py", line 117, in remove
      TypeError: 'NoneType' object is not callable
      Reading package lists... Done
      W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      W: Target Contents-deb (main/Contents-armhf) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      W: Target Contents-deb (main/Contents-all) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      W: Target Packages (contrib/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      W: Target Packages (contrib/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      W: Target Contents-deb (contrib/Contents-armhf) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      W: Target Contents-deb (contrib/Contents-all) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      W: Target Packages (non-free/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      W: Target Packages (non-free/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      W: Target Contents-deb (non-free/Contents-armhf) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      W: Target Contents-deb (non-free/Contents-all) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      W: Target Packages (main/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      W: Target Packages (main/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      W: Target Contents-deb (main/Contents-armhf) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      W: Target Contents-deb (main/Contents-all) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      W: Target Packages (contrib/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      W: Target Packages (contrib/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      W: Target Contents-deb (contrib/Contents-armhf) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      W: Target Contents-deb (contrib/Contents-all) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      W: Target Packages (non-free/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      W: Target Packages (non-free/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      W: Target Contents-deb (non-free/Contents-armhf) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      W: Target Contents-deb (non-free/Contents-all) is configured multiple times in /etc/apt/sources.list:7 and /etc/apt/sources.list.d/openmediavault-kernel-backports.list:1
      root@raspberrypi:~#
    • There are quite a few posts about this. If I remember well

      /etc/apt/sources.list.d/openmediavault-kernel-backports.list

      just contains one entry which also included in another list.. So you can remove that file (or copy to the /root folder, just in case). But search the forum first.

      Or you just ignore the warnings.
      Odroid HC2 - armbian - OMV4.x | Asrock Q1900DC-ITX - Intenso SSD 120GB - OMV4.x
      :!: Backup - Solutions to common problems - OMV setup videos - OMV4 Documentation - user guide :!:
    • macom wrote:

      There are quite a few posts about this. If I remember well

      /etc/apt/sources.list.d/openmediavault-kernel-backports.list

      just contains one entry which also included in another list.. So you can remove that file (or copy to the /root folder, just in case). But search the forum first.

      Or you just ignore the warnings.
      OMV will recreate that file. So, it should be removed from /etc/apt/sources.list.
      omv 5.0.10 usul | 64 bit | 5.0 proxmox kernel | omvextrasorg 5.1.1
      omv-extras.org plugins source code and issue tracker - github

      Please read this before posting a question and this and this for docker questions.
      Please don't PM for support... Too many PMs!