Filesystem flags changed to 0x1009 or to 0x1000

    • OMV 4.x

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Filesystem flags changed to 0x1009 or to 0x1000

      Hi all,

      Since one of the last updates I keep getting from time to time a message stating "filesystem flags changed to 0x1009" and "filesystem flags changed to 0x1000" on the data drives.
      That happens even if there is no activity on the drives.

      The same type of messages is received from both NASes:
      • HP MicroServer with mdadm raid has thrown 2-3 times "filesystem flags changed to 0x1000"
      • HP DL360 with P822 hardware raid has thrown 1-2 times "filesystem flags changed to 0x1009"


      Is that something concerning?
      What do 0x1000 and 0x1009 flags means?

      Thank you.
      HP MicroServer Gen 8 - Intel Celeron G1610T - 16GB ECC RAM - HP SmartArray P420 with 2*120GB Samsung EVO SSD - HP SmartArray B120i (AHCI Mode) with 2*6TB WD RED, 2*3TB WD RED

      HP DL360e Gen 8 - 2 Intel Xeon E5-2450L - 192GB ECC RAM - HP SmartArray P420 with 6*1TB Samsung QVO, 2*128GB HP SSD - HP SmartAray P822 with 12 * 3TB HP SAS Midline HDD in HP StorageWorks D2600

      The post was edited 2 times, last by kavejo ().