Install OMV5 via command line over Debian 10

    • OMV 5.x (beta)
    • Resolved
    • Install OMV5 via command line over Debian 10

      Hello,

      I normally install OMV via command line after installation of Debian. I need it because during installation of Debian I can format my big system-drive in several partitions.
      According to this how-to I did it with OMV4


      Source Code

      1. apt-get update
      2. apt-get upgrade
      3. apt-get dist-upgrade
      4. echo "deb http://packages.openmediavault.org/public arrakis main" > /etc/apt/sources.list.d/openmediavault.list
      5. apt-get update
      6. apt-get install openmediavault-keyring postfix
      7. apt-get update
      8. apt-get install openmediavault
      9. omv-initsystem
      10. reboot
      But unfortunately I can't find a how-to for OMV5.
      Does anybody know how I install OMV5 via command line?

      Only by replacing "arrakis" with "usul" didn't help.
      Maybe someone can help me further

      Thanks in advance

      Huberer
      OMV-Server-HW: MoBo Fujitsu D3417-B2 (Intel-LAN), Intel Xeon E3-1245 v6 Kaby Lake (4x3.70GHz), 16GB-Ram ECC UDIMM, 1x512GB SSD Samsung 850 Pro (sda2 - 30GB system, 4GB swap, sda5/rest - for work), 1x 10TB WD Red Pro, 1x 3TB WD Red (both basic setup) - Digibit R1 Sat-IP-Server with SatIP-Axe-Firmware

      OMV-Server-SW: Debian Stretch with backports-Kernel (always up-to-date), OMV v4 (always latest), omv-extras-plugin (always latests), AutoShutdown-Plugin, Virtualbox (with DSM 6.2.x), Docker with PlexMediaServer, TVHeadendServer (unstable release)

      BackupServer: Synology DS1010+ with 4GB Ram, 9TB@SHR (different hdd's), DSM 5.2-5967-2
    • Huberer wrote:

      But unfortunately I can't find a how-to for OMV5.
      Does anybody know how I install OMV5 via command line?
      It is pinned in the Guide forum - forum.openmediavault.org/index…OMV5-on-Debian-10-Buster/
      omv 5.0.10 usul | 64 bit | 5.0 proxmox kernel | omvextrasorg 5.1.1
      omv-extras.org plugins source code and issue tracker - github

      Please read this before posting a question and this and this for docker questions.
      Please don't PM for support... Too many PMs!
    • Thanks, I found in the meantime another post here in the forum. I had problems with the installation of the keyring but could solve it.
      Now installation process of OMV5 is going on :thumbsup:
      OMV-Server-HW: MoBo Fujitsu D3417-B2 (Intel-LAN), Intel Xeon E3-1245 v6 Kaby Lake (4x3.70GHz), 16GB-Ram ECC UDIMM, 1x512GB SSD Samsung 850 Pro (sda2 - 30GB system, 4GB swap, sda5/rest - for work), 1x 10TB WD Red Pro, 1x 3TB WD Red (both basic setup) - Digibit R1 Sat-IP-Server with SatIP-Axe-Firmware

      OMV-Server-SW: Debian Stretch with backports-Kernel (always up-to-date), OMV v4 (always latest), omv-extras-plugin (always latests), AutoShutdown-Plugin, Virtualbox (with DSM 6.2.x), Docker with PlexMediaServer, TVHeadendServer (unstable release)

      BackupServer: Synology DS1010+ with 4GB Ram, 9TB@SHR (different hdd's), DSM 5.2-5967-2
    • Yes, thanks @ryecoaaron already posted the link to this guide ;) anyway thank you
      OMV-Server-HW: MoBo Fujitsu D3417-B2 (Intel-LAN), Intel Xeon E3-1245 v6 Kaby Lake (4x3.70GHz), 16GB-Ram ECC UDIMM, 1x512GB SSD Samsung 850 Pro (sda2 - 30GB system, 4GB swap, sda5/rest - for work), 1x 10TB WD Red Pro, 1x 3TB WD Red (both basic setup) - Digibit R1 Sat-IP-Server with SatIP-Axe-Firmware

      OMV-Server-SW: Debian Stretch with backports-Kernel (always up-to-date), OMV v4 (always latest), omv-extras-plugin (always latests), AutoShutdown-Plugin, Virtualbox (with DSM 6.2.x), Docker with PlexMediaServer, TVHeadendServer (unstable release)

      BackupServer: Synology DS1010+ with 4GB Ram, 9TB@SHR (different hdd's), DSM 5.2-5967-2
    • Huberer wrote:

      Thanks, I found in the meantime another post here in the forum. I had problems with the installation of the keyring but could solve it.
      Now installation process of OMV5 is going on :thumbsup:
      How about to post it here?
      I have all the time problems to get that keyringthing running...
      Need OMV5 for RPI4.

      Tried to get OMV4 running but some things are deprecated.
      Even webssh was not working and after trie to install that, i got a lot of errors.
      Somehow RPI4 and OMV is not a solid option. Spent so much time to get everthing up and running.
      Dont want to have the habian with OMV4 somehow... I like debian even more.

      Maybe, im just too stupid.Just want to geht pihole and OMV running in parallel. Seem i had to inspect technodads -docker -pihole video even more. Sice the recordings, a lot of pihole docker options are changed.
    • There is no OMV5 for Raspberry Pi until Debian updates the kernal.

      The most common problems with raspberry Pi installs:
      Old, slow or corrupt sd card.
      Under powered power supply.
      These can cause all sorts of strange errors.

      Check those first.

      Once you know those aren't the problem, post your error messages to the forums. Take screen shots of the whole message. Take screen shots of any configuration files involved. The more information you can post, the faster a solution will be found.
      Build, Learn, Create.

      How to Videos for OMV

      Post any questions to the forum, so others can benefit from your curiosity. :thumbsup:
      No private support.
    • TechnoDadLife wrote:

      There is no OMV5 for Raspberry Pi until Debian updates the kernal.
      Why is that?

      Display Spoiler

      aaron@rpi4b:/$ lsb_release -a
      No LSB modules are available.
      Distributor ID: Raspbian
      Description: Raspbian GNU/Linux 10 (buster)
      Release: 10
      Codename: buster
      aaron@rpi4b:/$ dpkg -l | grep openm
      ii openmediavault 5.0.7-1 all openmediavault - The open network attached storage solution
      ii openmediavault-keyring 1.0 all GnuPG archive keys of the OpenMediaVault archive
      ii openmediavault-omvextrasorg 5.0.7 all OMV-Extras.org Package Repositories for OpenMediaVault
      omv 5.0.10 usul | 64 bit | 5.0 proxmox kernel | omvextrasorg 5.1.1
      omv-extras.org plugins source code and issue tracker - github

      Please read this before posting a question and this and this for docker questions.
      Please don't PM for support... Too many PMs!
    • ryecoaaron wrote:

      TechnoDadLife wrote:

      There is no OMV5 for Raspberry Pi until Debian updates the kernal.
      Why is that?
      Display Spoiler

      aaron@rpi4b:/$ lsb_release -a
      No LSB modules are available.
      Distributor ID: Raspbian
      Description: Raspbian GNU/Linux 10 (buster)
      Release: 10
      Codename: buster
      aaron@rpi4b:/$ dpkg -l | grep openm
      ii openmediavault 5.0.7-1 all openmediavault - The open network attached storage solution
      ii openmediavault-keyring 1.0 all GnuPG archive keys of the OpenMediaVault archive
      ii openmediavault-omvextrasorg 5.0.7 all OMV-Extras.org Package Repositories for OpenMediaVault

      wiki.debian.org/RaspberryPi


      Raspberry Pi 4
      Announced in 2019, this system adds a second HDMI port, more memory, true Gigabit Ethernet and USB3. There is no support for it in the Debian kernels yet. We understand this computer no longer boots from the GPU, so it is probable it will no longer require a binary blob to boot.



      I was looking at native Debian support for a Debian install.
      Build, Learn, Create.

      How to Videos for OMV

      Post any questions to the forum, so others can benefit from your curiosity. :thumbsup:
      No private support.
    • TechnoDadLife wrote:

      Announced in 2019, this system adds a second HDMI port, more memory, true Gigabit Ethernet and USB3. There is no support for it in the Debian kernels yet. We understand this computer no longer boots from the GPU, so it is probable it will no longer require a binary blob to boot.



      I was looking at native Debian support for a Debian install
      Either this is out of date or only applies to Debian. Raspbian is ok (not sure about second hdmi though):

      Display Spoiler

      aaron@rpi4b:/$ grep MemTotal /proc/meminfo
      MemTotal: 3999784 kB
      aaron@rpi4b:/$ ethtool eth0 | grep Speed:
      Speed: 1000Mb/s
      aaron@rpi4b:/$ lsusb | grep 3.0
      Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
      omv 5.0.10 usul | 64 bit | 5.0 proxmox kernel | omvextrasorg 5.1.1
      omv-extras.org plugins source code and issue tracker - github

      Please read this before posting a question and this and this for docker questions.
      Please don't PM for support... Too many PMs!
    • ryecoaaron wrote:

      TechnoDadLife wrote:

      There is no OMV5 for Raspberry Pi until Debian updates the kernal.
      Why is that?
      Display Spoiler

      aaron@rpi4b:/$ lsb_release -a
      No LSB modules are available.
      Distributor ID: Raspbian
      Description: Raspbian GNU/Linux 10 (buster)
      Release: 10
      Codename: buster
      aaron@rpi4b:/$ dpkg -l | grep openm
      ii openmediavault 5.0.7-1 all openmediavault - The open network attached storage solution
      ii openmediavault-keyring 1.0 all GnuPG archive keys of the OpenMediaVault archive
      ii openmediavault-omvextrasorg 5.0.7 all OMV-Extras.org Package Repositories for OpenMediaVault

      So you are running Raspian on your pi 4.

      I successfully installed OMV 5 over Raspian on a Pi4, but it didn't seem to persist after I rebooted the machine today. Any ideas?



      After reinstalling, I got this message and updated everything but this and it seems to be running fine now. I haven't restarted again though.
      Build, Learn, Create.

      How to Videos for OMV

      Post any questions to the forum, so others can benefit from your curiosity. :thumbsup:
      No private support.

      The post was edited 2 times, last by TechnoDadLife: Clarity ().

    • ryecoaaron wrote:

      TechnoDadLife wrote:

      There is no OMV5 for Raspberry Pi until Debian updates the kernal.
      Why is that?
      Display Spoiler

      aaron@rpi4b:/$ lsb_release -a
      No LSB modules are available.
      Distributor ID: Raspbian
      Description: Raspbian GNU/Linux 10 (buster)
      Release: 10
      Codename: buster
      aaron@rpi4b:/$ dpkg -l | grep openm
      ii openmediavault 5.0.7-1 all openmediavault - The open network attached storage solution
      ii openmediavault-keyring 1.0 all GnuPG archive keys of the OpenMediaVault archive
      ii openmediavault-omvextrasorg 5.0.7 all OMV-Extras.org Package Repositories for OpenMediaVault

      Is OMV extras working for the raspberry pi?
      Build, Learn, Create.

      How to Videos for OMV

      Post any questions to the forum, so others can benefit from your curiosity. :thumbsup:
      No private support.
    • TechnoDadLife wrote:

      Is OMV extras working for the raspberry pi?
      Yep. It works on all systems.

      TechnoDadLife wrote:

      Got Extras installed by sudo su.
      What command did you try first? I assume it isn't the command below?

      WastlJ wrote:

      From command line as root

      wget -O - omv-extras.org/install | bash


      TechnoDadLife wrote:

      New error trying to install a plugin.
      Definitely a DNS error.
      omv 5.0.10 usul | 64 bit | 5.0 proxmox kernel | omvextrasorg 5.1.1
      omv-extras.org plugins source code and issue tracker - github

      Please read this before posting a question and this and this for docker questions.
      Please don't PM for support... Too many PMs!
    • ryecoaaron wrote:

      TechnoDadLife wrote:

      Is OMV extras working for the raspberry pi?
      Yep. It works on all systems.

      TechnoDadLife wrote:

      Got Extras installed by sudo su.
      What command did you try first? I assume it isn't the command below?

      WastlJ wrote:

      From command line as root

      wget -O - omv-extras.org/install | bash

      TechnoDadLife wrote:

      New error trying to install a plugin.
      Definitely a DNS error.

      wget -O - omv-extras.org/install | bash

      Definitely that is what I used.

      I had to use Sudo Su, when I used logged in from Putty.

      Are you running OM V5 on your Pi4?
      Build, Learn, Create.

      How to Videos for OMV

      Post any questions to the forum, so others can benefit from your curiosity. :thumbsup:
      No private support.
    • TechnoDadLife wrote:

      I had to use Sudo Su, when I used logged in from Putty.
      Which changes you to root and that is mandatory. You could also do: wget -O - http://omv-extras.org/install | sudo bash

      TechnoDadLife wrote:

      Are you running OM V5 on your Pi4?
      Yes, for testing.
      omv 5.0.10 usul | 64 bit | 5.0 proxmox kernel | omvextrasorg 5.1.1
      omv-extras.org plugins source code and issue tracker - github

      Please read this before posting a question and this and this for docker questions.
      Please don't PM for support... Too many PMs!