Lets Encrypt

    • OMV 4.x
    • Good advice,I also followed @blackhole guide
      here my emby.subdomain.conf in case you need it.

      Source Code

      1. # make sure that your dns has a cname set for emby, if emby is running in bridge mode, the below config should work as is, although,
      2. # the container name is expected to be "emby", if not, replace the line "set $upstream_emby emby;" with "set $upstream_emby <containername>;"
      3. # for host mode, replace the line "proxy_pass http://$upstream_emby:8096;" with "proxy_pass http://HOSTIP:8096;" HOSTIP being the IP address of emby
      4. # in emby settings, under "Advanced" change the public https port to 443, leave the local ports as is, set the "external domain" to your url,
      5. # and set the "Secure connection mode" to "Handled by reverse proxy"
      6. server {
      7. listen 443 ssl;
      8. server_name emby.MYDOMAIN_NAME.*;
      9. add_header X-Robots-Tag "noindex, nofollow, nosnippet, noarchive";
      10. include /config/nginx/ssl.conf;
      11. client_max_body_size 0;
      12. location / {
      13. include /config/nginx/proxy.conf;
      14. resolver 127.0.0.11 valid=30s;
      15. set $upstream_emby emby;
      16. proxy_pass http://OMV-IP:8096;
      17. proxy_set_header Range $http_range;
      18. proxy_set_header If-Range $http_if_range;
      19. proxy_set_header Upgrade $http_upgrade;
      20. proxy_set_header Connection "upgrade";
      21. }
      22. }
      Display All