UPS Settiings

  • 1) OMV installed on a PC, with a APC BackUps pro 900 connected to USB port.
    2) NUT plugin installed


    In the UPS configuration page I wrote the following directives:


    [SSI_Ups]
    driver = usbhid-ups
    port = auto


    But nothing happens.. I receive messages like 'Connection can't be established'. Maybe I have to specify the port number? Or? ?(


    Regards
    Paolo Rossi
    University of Bologna - Italy

  • While configuring the NUT plugin page the driver tries to communicate immediately with the UPS. If the UPS is not connected via USB these kind of error messages are generated. Therefore switch the UPS on and connect it to the OMV server. Then repeat your configuration attempt.


    Btw: I am assuming that the 'usbhid-ups' is the correct driver type for your UPS. Otherwise check https://networkupstools.org/ for alternatives.

    OMV 3.0.100 (Gray style)

    ASRock Rack C2550D4I C0-stepping - 16GB ECC - 6x WD RED 3TB (ZFS 2x3 Striped RaidZ1) - Fractal Design Node 304 -

    3x WD80EMAZ Snapraid / MergerFS-pool via eSATA - 4-Bay ICYCube MB561U3S-4S with fan-mod

    Einmal editiert, zuletzt von cabrio_leo ()

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!