Hi and I hope this problem has not been covered before. Installed OMV onto my Raspberry Pi 4 and used a 32 GB USB 3 stick as storage, so I can play with the system before committing to larger storage. The Pi 4 is plugged into a spare Ethernet port on my router. Software set up and no problems on the OMV installation that I can detect. My problem is that my Windows 10 computer cannot see the Pi 4 and mapping a network drive does not find it. I followed a couple of different YouTube videos to do this. I went into my router settings and I can see the Pi and I gave it a static address and the OMV software connects to the PI with no problem. Any suggestions please?
John