Configuration mistake - unable to access to the nas

    • OMV 3.x

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Configuration mistake - unable to access to the nas

      Hi,

      I made a mistake after trying to change the configuration of the nas, cause I changed of house. More specificly, it was during the change of the ports...

      Now, my modem see the nas but when I type the IP, it doesn't work. It doesn't work anymore if I type the old IP. I also try to access by putty, but it doesn't work too...

      The only thing I can do, is to connect a keyboard and a screen directly to the nas, put the nas on and loggin directly to it but the debian interface login stay and I can do something like try to use a command line.

      Help me please!
    • to complete my message:

      The modem say that the nas has the ip 192.168.0.40
      But because I made a bad configuration of the ports (192.168.1.40), it's impossible to access

      unfortunately, the box doesn't allow to change the port with 192.168.1.x (Don't ask why, just a bad hoster)

      I think I have a kind of loop problem with my port and I'ld like to access to the admin directly in the system with a keyboard and a screen...
    • Do you have physical access to the NAS or only via remote access?

      If you are able to connect a keyboard and a monitor then you should login with user root to the OMV command line interface.

      With the command omv-firstaid you get a selection menu with an option to reset the lan configuration.
      OMV 3.0.99 (Gray style)
      ASRock Rack C2550D4I C0-stepping - 16GB ECC - 6x WD RED 3TB (ZFS 2x3 Striped RaidZ1)- Fractal Design Node 304
    • typiac wrote:

      ok. Could you explain how I can run the first aid command? Because When I turn on the nas physically with a keyboard and a screen, I've a debian login interface. If I put the admin and the correct password, nothing happens...
      The admin user does not have shell access. You must login as root.
      --
      Google is your friend and Bob's your uncle!

      OMV 4.x - ASRock Rack C2550D4I - 16GB ECC - Silverstone DS380
    • I would like too but here is the problem:

      - the box says that the nas is at this adress: 192.168.1.40

      So I run putty and try to make a connection but I have a timeout message. I'm sure it's because I made a mistake with the ports redirection and I don't know how I can enter in root directly in debian. Is it possible?
    • Thanks again for your help, I appreciate!

      with a distant computer and putty: 192.168.1.40 and ssh : connection timeout

      with a distant terminal: 192.168.1.40 : connection timeout

      If I connect the keyboard and the screen direcly to the OMV: login debian page, I enter the name and the password...nothing happens
    • typiac wrote:



      If I connect the keyboard and the screen direcly to the OMV: login debian page, I enter the name and the password...nothing happens
      Are you using root for the name and the correct password?

      It should either log you in or fail with a message. If absolutely nothing happens something is drastically wrong and I have no answer for you.
      --
      Google is your friend and Bob's your uncle!

      OMV 4.x - ASRock Rack C2550D4I - 16GB ECC - Silverstone DS380