Phpmyadmin Docker issue

    This site uses cookies. By continuing to browse this site, you are agreeing to our Cookie Policy.

    • Phpmyadmin Docker issue

      Hello dear forum community,


      i want to set up nextcloud on my omv system. I installed mariadb and phpmyadmin as docker.


      Mariadb runs without any problems.


      As soon as I start phpmyadmin in bridge mode and set 80-> 82 as port and enter the following datasets: PMA_HOST 192.168.178.xx PMA_PORT 3306 (from Mariadb) and start phpmyadmin I cannot get to the page.


      Phpmyadmin is called 192.168.178.xx:82.


      Page is not displayed Error: Connection failed
      Firefox cannot connect to the server at 192.168.178.62.


      Status: Restarting (1) 41 seconds ago


      Do I have to do anything else?


      Hope someone can help me.


      I have a Raspberry PI 4 with 4GB memory.

      Source Code

      1. standard_init_linux.go:211: exec user process caused "exec format error"
      2. standard_init_linux.go:211: exec user process caused "exec format error"
      3. standard_init_linux.go:211: exec user process caused "exec format error"
      4. standard_init_linux.go:211: exec user process caused "exec format error"
      5. standard_init_linux.go:211: exec user process caused "exec format error"
      6. standard_init_linux.go:211: exec user process caused "exec format error"
      7. standard_init_linux.go:211: exec user process caused "exec format error"
      8. standard_init_linux.go:211: exec user process caused "exec format error"
      9. standard_init_linux.go:211: exec user process caused "exec format error"
      10. standard_init_linux.go:211: exec user process caused "exec format error"
      11. standard_init_linux.go:211: exec user process caused "exec format error"
      12. standard_init_linux.go:211: exec user process caused "exec format error"
      13. standard_init_linux.go:211: exec user process caused "exec format error"
      14. standard_init_linux.go:211: exec user process caused "exec format error"
      15. standard_init_linux.go:211: exec user process caused "exec format error"
      16. standard_init_linux.go:211: exec user process caused "exec format error"
      17. standard_init_linux.go:211: exec user process caused "exec format error"
      18. standard_init_linux.go:211: exec user process caused "exec format error"
      19. standard_init_linux.go:211: exec user process caused "exec format error"
      20. standard_init_linux.go:211: exec user process caused "exec format error"
      21. standard_init_linux.go:211: exec user process caused "exec format error"
      22. standard_init_linux.go:211: exec user process caused "exec format error"
      23. standard_init_linux.go:211: exec user process caused "exec format error"
      Display All





      Translated with DeepL.com/Translator (free version)
    • Hello Thank you very much for the answer.


      Now I have followed another manual and both dockers are also started and running.


      But I can't get to the web interface of Nextcloud.


      Can you please help me?

      mariadb log:


      Brainfuck Source Code

      1. [s6-init] making user provided files available at /var/run/s6/etc...exited 0.
      2. [s6-init] ensuring user provided files have correct perms...exited 0.
      3. [fix-attrs.d] applying ownership & permissions fixes...
      4. [fix-attrs.d] done.
      5. [cont-init.d] executing container initialization scripts...
      6. [cont-init.d] 01-envfile: executing...
      7. [cont-init.d] 01-envfile: exited 0.
      8. [cont-init.d] 10-adduser: executing...
      9. -------------------------------------
      10. _ ()
      11. | | ___ _ __
      12. | | / __| | | / \
      13. | | \__ \ | | | () |
      14. |_| |___/ |_| \__/
      15. Brought to you by linuxserver.io
      16. We gratefully accept donations at:
      17. https://www.linuxserver.io/donate/
      18. -------------------------------------
      19. GID/UID
      20. -------------------------------------
      21. User uid: 1000
      22. User gid: 100
      23. -------------------------------------
      24. [cont-init.d] 10-adduser: exited 0.
      25. [cont-init.d] 30-config: executing...
      26. [cont-init.d] 30-config: exited 0.
      27. [cont-init.d] 40-initialise-db: executing...
      28. Setting Up Initial Databases
      29. Installing MariaDB/MySQL system tables in '/config/databases' ...
      30. 2019-11-28 17:45:17 3069778752 [Note] /usr/sbin/mysqld (mysqld 10.1.43-MariaDB-0ubuntu0.18.04.1) starting as process 278 ...
      31. OK
      32. Filling help tables...
      33. 2019-11-28 17:45:25 3069885248 [Note] /usr/sbin/mysqld (mysqld 10.1.43-MariaDB-0ubuntu0.18.04.1) starting as process 308 ...
      34. OK
      35. Creating OpenGIS required SP-s...
      36. 2019-11-28 17:45:28 3069619008 [Note] /usr/sbin/mysqld (mysqld 10.1.43-MariaDB-0ubuntu0.18.04.1) starting as process 338 ...
      37. OK
      38. To start mysqld at boot time you have to copy
      39. support-files/mysql.server to the right place for your system
      40. PLEASE REMEMBER TO SET A PASSWORD FOR THE MariaDB root USER !
      41. To do so, start the server, then issue the following commands:
      42. '/usr/bin/mysqladmin' -u root password 'new-password'
      43. '/usr/bin/mysqladmin' -u root -h 141e18cc84f1 password 'new-password'
      44. Alternatively you can run:
      45. '/usr/bin/mysql_secure_installation'
      46. which will also give you the option of removing the test
      47. databases and anonymous user created by default. This is
      48. strongly recommended for production servers.
      49. See the MariaDB Knowledgebase at http://mariadb.com/kb or the
      50. MySQL manual for more instructions.
      51. You can start the MariaDB daemon with:
      52. cd '/usr' ; /usr/bin/mysqld_safe --datadir='/config/databases'
      53. You can test the MariaDB daemon with mysql-test-run.pl
      54. cd '/usr/mysql-test' ; perl mysql-test-run.pl
      55. Please report any problems at http://mariadb.org/jira
      56. The latest information about MariaDB is available at http://mariadb.org/.
      57. You can find additional information about the MySQL part at:
      58. http://dev.mysql.com
      59. Consider joining MariaDB's strong and vibrant community:
      60. https://mariadb.org/get-involved/
      61. 2019-11-28 17:45:32 3069832000 [Note] mysqld (mysqld 10.1.43-MariaDB-0ubuntu0.18.04.1) starting as process 366 ...
      62. Database Setup Completed
      63. [cont-init.d] 40-initialise-db: exited 0.
      64. [cont-init.d] 99-custom-scripts: executing...
      65. [custom-init] no custom files found exiting...
      66. [cont-init.d] 99-custom-scripts: exited 0.
      67. [cont-init.d] done.
      68. [services.d] starting services
      69. [services.d] done.
      70. 191128 17:45:38 mysqld_safe Logging to syslog.
      71. 191128 17:45:38 mysqld_safe Starting mysqld daemon with databases from /config/databases
      72. Caught SIGTERM signal!
      73. [cont-finish.d] executing container finish scripts...
      74. [cont-finish.d] done.
      75. [s6-finish] waiting for services.
      76. [s6-finish] sending all processes the TERM signal.
      77. [s6-finish] sending all processes the KILL signal and exiting.
      78. [s6-init] making user provided files available at /var/run/s6/etc...exited 0.
      79. [s6-init] ensuring user provided files have correct perms...exited 0.
      80. [fix-attrs.d] applying ownership & permissions fixes...
      81. [fix-attrs.d] done.
      82. [cont-init.d] executing container initialization scripts...
      83. [cont-init.d] 01-envfile: executing...
      84. [cont-init.d] 01-envfile: exited 0.
      85. [cont-init.d] 10-adduser: executing...
      86. usermod: no changes
      87. -------------------------------------
      88. _ ()
      89. | | ___ _ __
      90. | | / __| | | / \
      91. | | \__ \ | | | () |
      92. |_| |___/ |_| \__/
      93. Brought to you by linuxserver.io
      94. We gratefully accept donations at:
      95. https://www.linuxserver.io/donate/
      96. -------------------------------------
      97. GID/UID
      98. -------------------------------------
      99. User uid: 1000
      100. User gid: 100
      101. -------------------------------------
      102. [cont-init.d] 10-adduser: exited 0.
      103. [cont-init.d] 30-config: executing...
      104. [cont-init.d] 30-config: exited 0.
      105. [cont-init.d] 40-initialise-db: executing...
      106. [cont-init.d] 40-initialise-db: exited 0.
      107. [cont-init.d] 99-custom-scripts: executing...
      108. [custom-init] no custom files found exiting...
      109. [cont-init.d] 99-custom-scripts: exited 0.
      110. [cont-init.d] done.
      111. [services.d] starting services
      112. [services.d] done.
      113. 191128 17:46:39 mysqld_safe Logging to syslog.
      114. 191128 17:46:39 mysqld_safe Starting mysqld daemon with databases from /config/databases
      Display All

      Nextcloud log:

      Brainfuck Source Code

      1. [s6-init] making user provided files available at /var/run/s6/etc...exited 0.
      2. [s6-init] ensuring user provided files have correct perms...exited 0.
      3. [fix-attrs.d] applying ownership & permissions fixes...
      4. [fix-attrs.d] done.
      5. [cont-init.d] executing container initialization scripts...
      6. [cont-init.d] 10-adduser: executing...
      7. usermod: no changes
      8. -------------------------------------
      9. _ ()
      10. | | ___ _ __
      11. | | / __| | | / \
      12. | | \__ \ | | | () |
      13. |_| |___/ |_| \__/
      14. Brought to you by linuxserver.io
      15. We gratefully accept donations at:
      16. https://www.linuxserver.io/donate/
      17. -------------------------------------
      18. GID/UID
      19. -------------------------------------
      20. User uid: 911
      21. User gid: 911
      22. -------------------------------------
      23. [cont-init.d] 10-adduser: exited 0.
      24. [cont-init.d] 20-config: executing...
      25. [cont-init.d] 20-config: exited 0.
      26. [cont-init.d] 30-keygen: executing...
      27. generating self-signed keys in /config/keys, you can replace these with your own keys if required
      28. Generating a RSA private key
      29. ..................+++++
      30. .................+++++
      31. writing new private key to '/config/keys/cert.key'
      32. -----
      33. [cont-init.d] 30-keygen: exited 0.
      34. [cont-init.d] 40-config: executing...
      35. [cont-init.d] 40-config: exited 0.
      36. [cont-init.d] 50-install: executing...
      37. [cont-init.d] 50-install: exited 0.
      38. [cont-init.d] 60-memcache: executing...
      39. [cont-init.d] 60-memcache: exited 0.
      40. [cont-init.d] 99-custom-files: executing...
      41. [custom-init] no custom files found exiting...
      42. [cont-init.d] 99-custom-files: exited 0.
      43. [cont-init.d] done.
      44. [services.d] starting services
      45. [services.d] done.
      Display All
      Images
      • docker.png

        90.24 kB, 1,920×1,037, viewed 12 times
    • I think by default the nextcloud image from linuxserver only exposes port 443. You did not forward this port in your docker configuration. So if you are going by tdl guide you forward port 443 to 444 and then can access nextcloud on https://server_ip:444
      And also please set up gid/uid settings for the container. Otherwise you will run into permission problems sooner or later.