OpenmediaVault does not recognise Rpi 4 Network Adaptor

matthewn · 4. Dezember 2019

I have downloaded and imaged firmware for the RPi4 and each time it is booted it returns errors with the network adaptors.
It also does not allow a local login to manually set the adaptors.

the Pi is RPi4b 2gb

screenshot video (if it helps).

[Link to video]
or

Externer Inhalt youtu.be

Inhalte von externen Seiten werden ohne Ihre Zustimmung nicht automatisch geladen und angezeigt.

Durch die Aktivierung der externen Inhalte erklären Sie sich damit einverstanden, dass personenbezogene Daten an Drittplattformen übermittelt werden. Mehr Informationen dazu haben wir in unserer Datenschutzerklärung zur Verfügung gestellt.

cabrio_leo · 4. Dezember 2019

OMV can be installed in several ways on ARM board, which may have an influence on the supported network hardware. Please look at this threads:

matthewn · 4. Dezember 2019

I just used the OMV build image.
(re-imaged a second and third time, same issue).

My RPi3 version still works, I was only putting on RPi4 for the USB3 interface for speed of dealing with larger files.

ryecoaaron · 4. Dezember 2019

I am very close to deleting the OMV 4.x RPi image - might happen soon. I highly recommend NOT using that image for RPi4s. Use OMV 5.x - https://forum.openmediavault.o…-Armbian-Supported-SBC-s/

votdev · 5. Dezember 2019

When no IP address is displayed in the welcome screen then this does not mean that the system has no working network interface. In your case the network is not up when the welcome screen text is generated. The init files is started AFTER the network init file is executed, but this does not mean that the network is up at this moment.

But you have a more strange problem, your nginx server is not running, thus you can not reach the WebUI.

Jetzt mitmachen!