Hi
My NAS turn with a I7-7700K, here is lscpu result:
Code
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 8
On-line CPU(s) list: 0-7
Thread(s) per core: 2
Core(s) per socket: 4
Socket(s): 1
NUMA node(s): 1
Vendor ID: GenuineIntel
CPU family: 6
Model: 158
Model name: Intel(R) Core(TM) i7-7700K CPU @ 4.20GHz
Stepping: 9
CPU MHz: 1093.251
CPU max MHz: 4600.0000
CPU min MHz: 800.0000
BogoMIPS: 8400.00
Virtualization: VT-x
L1d cache: 32K
L1i cache: 32K
L2 cache: 256K
L3 cache: 8192K
NUMA node0 CPU(s): 0-7
My OMV CLI is displaying me a regular error message related to overheating of my processor and the cores:
Code
CPU0: Core temperature above threshold, cpu clock throttled (total events = 458)
CPU6: Package temperature above threshold, cpu clock throttled (total events = 926)
CPU2:Package temperature above threshold, cpu clock throttled (total events = 926)
CPU3:Package temperature above threshold, cpu clock throttled (total events = 926)
CPU1:Package temperature above threshold, cpu clock throttled (total events = 926)
CPU7:Package temperature above threshold, cpu clock throttled (total events = 926)
CPU5:Package temperature above threshold, cpu clock throttled (total events = 926)
CPU0:Package temperature above threshold, cpu clock throttled (total events = 926)
CPU4:Package temperature above threshold, cpu clock throttled (total events = 926)First, I check the hardware. The CPU fan is OK, the rad is clean. All the case fan are OK.
I check my BIOS settings and I set the fan speed at the max (3200 rpm). The BIOS show a temperature about 30°C for the CPU.
In OMV CLI, sensors give a normal temp, even after big loads:
Code
asus-isa-0000
Adapter: ISA adapter
cpu_fan: 0 RPM
coretemp-isa-0000
Adapter: ISA adapter
Package id 0: +41.0°C (high = +80.0°C, crit = +100.0°C)
Core 0: +39.0°C (high = +80.0°C, crit = +100.0°C)
Core 1: +40.0°C (high = +80.0°C, crit = +100.0°C)
Core 2: +39.0°C (high = +80.0°C, crit = +100.0°C)
Core 3: +38.0°C (high = +80.0°C, crit = +100.0°C)The speed of the cpu_fan is not correct: it keep turning at high rate.
I do not understand why this message continues to appear...
Does my CPU pause regularly?
Thks for the help...