urbackup on omv5 raspberry pi 4b

Greetings,
Omv-version 5
I followed the omv PDF for installation of omv (only version 5 available) on a raspberry pi 4b.
Nice and fast.vall went well.
Situation:
Omv5 does not support doker gui just yet.
We need to use portainer.
Installed portainer
Not many dokers available. I found urbackup as a backup system for my systems in my LAN.
After a successful docker I stallation, I can see the running image.
Back on OMV, I cannot fi d any service o client to be able to configure it
I would need some help if anyone has experience with it in OMV 5
Thank you.
Ps
I already successfully changed the docker oath to my 1T external data ssd

Ok. Thanks. No doker gui in omv5.
About portainer apps, I don't see many. Not on the plug-in page.
When I look at the omv-extra.org, there is a list of app for and up to omv v4.
Omv5 list is way more short in the omv plugin page .
If I miss something, I would appreciate you explain me .
And about the urbackup, ... Is installed but nowhere to be found in omv5. Again... I can overlook something.. I appreciate if you point that out for me.
I really would like to use it.

Zitat von Morlan

The official urbackup docker for arm is currently work in progress. Check in back in a week.
In the meantime you can use my image : morlan/urbackup_docker:latest

ok. Thanks. I will check that out later. Appreciated your help

Zitat von Morlan

The official urbackup docker for arm is currently work in progress. Check in back in a week.
In the meantime you can use my image : morlan/urbackup_docker:latest

Hi @Morlan, I am now trying your suggestion. I have installed the image in Portainer. I can see it running. no error during installation.
However, under the Service in the GUI, I do not see the URBACKUP. or anywhere else in OMV.
Could you please give me some help about how to start with urbackup?
I also tried to open the web interface using one of the tcp exposed ports... but I do not have any interface or answer.
I really would d need some help here.
Thanks

Zitat von ryecoaaron

There are no docker apps on the plugin page. You need to look on hub.docker.com and then specify the image in portainer.

There are some plugins that were not ported to OMV 5.x in favor of using docker - https://forum.openmediavault.o…?postID=186122#post186122

Read morlan's comment.

None of the suggested ports above work.
I also see those ports on the published ports. It the address does not respond. I used the server up:ports
The container network mode is in bridge. Should be ok. Correct?

Container connected to bridge network
but I did not modify that. It was already in bridge
I was looking in the wrong place for logs... here is is:
I noticed a couple of errors. Note: I use ext4 (no zfs or btrfs)
========
2019-12-17 12:25:44: Generating Server token...,
2019-12-17 12:25:44: WARNING: Upgrading...,
2019-12-17 12:25:44: WARNING: Upgrading database to version 8,
2019-12-17 12:25:44: WARNING: Upgrading database to version 9,
2019-12-17 12:25:45: WARNING: Upgrading database to version 10,
2019-12-17 12:25:45: WARNING: Upgrading database to version 11,
2019-12-17 12:25:45: WARNING: Upgrading database to version 12,
2019-12-17 12:25:45: WARNING: Upgrading database to version 13,
2019-12-17 12:25:45: WARNING: Upgrading database to version 14,
2019-12-17 12:25:45: WARNING: Upgrading database to version 15,
2019-12-17 12:25:45: WARNING: Upgrading database to version 16,
2019-12-17 12:25:45: WARNING: Upgrading database to version 17,
2019-12-17 12:25:45: WARNING: Upgrading database to version 18,
2019-12-17 12:25:45: WARNING: Upgrading database to version 19,
2019-12-17 12:25:45: WARNING: Upgrading database to version 20,
2019-12-17 12:25:45: WARNING: Upgrading database to version 21,
2019-12-17 12:25:45: WARNING: Upgrading database to version 22,
2019-12-17 12:25:45: WARNING: Upgrading database to version 23,
2019-12-17 12:25:45: WARNING: Upgrading database to version 24,
2019-12-17 12:25:45: WARNING: Upgrading database to version 25,
2019-12-17 12:25:45: WARNING: Upgrading database to version 26,
2019-12-17 12:25:45: WARNING: Upgrading database to version 27,
2019-12-17 12:25:45: WARNING: Upgrading database to version 28,
2019-12-17 12:25:45: WARNING: Upgrading database to version 29,
2019-12-17 12:25:45: WARNING: Upgrading database to version 30,
2019-12-17 12:25:45: WARNING: Upgrading database to version 31,
2019-12-17 12:25:45: WARNING: Upgrading database to version 32,
2019-12-17 12:25:45: WARNING: Upgrading database to version 33,
2019-12-17 12:25:45: WARNING: Upgrading database to version 34,
2019-12-17 12:25:45: WARNING: Upgrading database to version 35,
2019-12-17 12:25:45: WARNING: Upgrading database to version 36,
2019-12-17 12:25:45: WARNING: Upgrading database to version 37,
2019-12-17 12:25:45: WARNING: Upgrading database to version 38,
2019-12-17 12:25:45: WARNING: Upgrading database to version 39,
2019-12-17 12:25:45: WARNING: Upgrading database to version 40,
2019-12-17 12:25:45: WARNING: Upgrading database to version 41,
2019-12-17 12:25:45: WARNING: Upgrading database to version 42,
2019-12-17 12:25:45: WARNING: Upgrading database to version 43,
2019-12-17 12:25:45: WARNING: Upgrading database to version 44,
2019-12-17 12:25:45: WARNING: Upgrading database to version 45,
2019-12-17 12:25:45: WARNING: Upgrading database to version 46,
2019-12-17 12:25:45: WARNING: Upgrading database to version 48,
2019-12-17 12:25:45: WARNING: Upgrading database to version 49,
2019-12-17 12:25:46: WARNING: Upgrading database to version 50,
2019-12-17 12:25:46: WARNING: Upgrading database to version 51,
2019-12-17 12:25:46: WARNING: Upgrading database to version 52,
2019-12-17 12:25:46: WARNING: Upgrading database to version 53,
2019-12-17 12:25:46: WARNING: Upgrading database to version 54,
2019-12-17 12:25:46: WARNING: Upgrading database to version 55,
2019-12-17 12:25:46: WARNING: Upgrading database to version 56,
2019-12-17 12:25:46: WARNING: Upgrading database to version 57,
2019-12-17 12:25:46: WARNING: Upgrading database to version 58,
2019-12-17 12:25:46: WARNING: Upgrading database to version 59,
2019-12-17 12:25:46: WARNING: Done.,
2019-12-17 12:25:46: Deleting database journal...,
2019-12-17 12:25:46: Copying/reflinking database...,
2019-12-17 12:25:46: Reflink ioctl failed. errno=95,
2019-12-17 12:25:46: WARNING: Creating file entry index. This might take a while...,
2019-12-17 12:25:46: Getting number of files...,
2019-12-17 12:25:46: Dropping index...,
2019-12-17 12:25:46: Starting creating files index...,
2019-12-17 12:25:46: Creating backupid index...,
2019-12-17 12:25:46: Syncing...,
2019-12-17 12:25:46: Renaming back result...,
2019-12-17 12:25:46: SQLite: recovered 1 frames from WAL file /var/urbackup/backup_server.db-wal code: 283,
2019-12-17 12:25:46: SQLite: recovered 2 frames from WAL file /var/urbackup/backup_server_settings.db-wal code: 283,
2019-12-17 12:25:46: Started UrBackup...,
2019-12-17 12:25:46: Removing temporary files...,
2019-12-17 12:25:46: ERROR: No permission to access "/backups/urbackup_tmp_files",
2019-12-17 12:25:46: Recreating temporary folder...,
TEST FAILED: guestmount is missing (libguestfs-tools),
2019-12-17 12:25:46: Image mounting disabled: TEST FAILED: guestmount is missing (libguestfs-tools),
Testing for btrfs...,
TEST FAILED: Creating test btrfs subvolume failed,
Testing for zfs...,
TEST FAILED: Dataset is not set via /etc/urbackup/dataset,
ERROR: not a btrfs filesystem: /backups/testA54hj5luZtlorr494,
2019-12-17 12:25:46: Backup destination cannot handle subvolumes and snapshots. Snapshots disabled.,
2019-12-17 12:25:46: Reflink ioctl failed. errno=95,
2019-12-17 12:25:46: Broadcasting on ipv4 interface eth0 addr 172.17.0.3,
2019-12-17 12:25:46: UrBackup Server start up complete.,
2019-12-17 12:25:46: Server started up successfully!,
2019-12-17 12:25:46: Looking for old Sessions... 0 sessions,
2019-12-17 12:25:47: Downloading version file...,
2019-12-17 12:25:47: Downloading signature...,
2019-12-17 12:25:47: Downloading old signature...,
2019-12-17 12:25:47: Getting update file URL...,
2019-12-17 12:25:47: Downloading update file...,
2019-12-17 12:25:55: Successfully downloaded update file.,
2019-12-17 12:25:55: Downloading version file...,
2019-12-17 12:25:55: Downloading signature...,
2019-12-17 12:25:56: Getting update file URL...,
2019-12-17 12:25:56: Downloading update file...,
2019-12-17 12:26:03: Successfully downloaded update file.,
2019-12-17 12:26:03: Downloading server version info...,
2019-12-17 12:26:03: Downloading dataplan database...,
2019-12-17 12:55:47: Looking for old Sessions... 0 sessions,
2019-12-17 13:25:48: Looking for old Sessions... 0 sessions,
2019-12-17 13:55:49: Looking for old Sessions... 0 sessions,
2019-12-17 14:25:50: Looking for old Sessions... 0 sessions,
========

I installed it by giving your image name in the image name field
Publish all exposed network ports to random host ports ON
Enable access control OFF

Nothing more than that.

For the logs, I posted it here above. the previews post. did it not come out in the forum?

I can post it again if not.

Thanks

never used that before. I am trying. I assume is only to add the docker-compose.yml in the name field?
do I need to keep Enable access control ON? (In a video of techno dead life it explains that is no use for OMV!)

Zitat von Morlan

I would suggest to remove the container and set it up using the docker-compose.yml provided in the Readme. You can use the stack option of portainer to deploy it. It has all the necessary configurations.

I tried successfully!
I copied the script on the docker-composer web editor, deployed and I do have the web interface working now.
Much appreciate.
Now I will deal with the configuration.
Question:
any update will be automatic or I need to re-deploy if you change version? (I am new in this. sorry for the question)

Zitat von Morlan

When there is a new version you manually pull the latest image and recreate the container through the stack

Hi Morlan,
the urbackup webUI warns me there is a new version.
Following your above suggestion, I went to the Stack and switched to EDITOR.
I have an option there called: UPDATE THE STACK
Looks like is pulling the new image. but urbackup is still giving the same message (to update to latest version).
do I make any mistake in this procedure?
regards,
Kattivius