How do I add a container with different tag...?

Hi,

https://hub.docker.com/r/haugene/transmission-openvpn/tags

I have an Raspberry pi 4 withOMV 5 installed and want to install the haugene/transmission-openvpn container but want to use the tag latest-armhf tag. How do I apply this image? Thanks.

Thanks, that works great. So I tried using this container but don't know where you put your "extra args" which is allowed in OMV4. I saw this thread about another person who has the same problem, but couldn't find out the answer either.

https://forum.openmediavault.o…a-Arguments-in-Portainer/

I figured it out. I used a command line and did it by doing this. It is under OPENVPN_OPTS. Note that I am using vpnunlimited. I also got the .ovpn file from my provider and created the ca.crt, client.crt and client.key file.

I am still trying to fix the error due to "AEAD Decrypt error: bad packet ID (may be a replay): [ #2052376 ] -- see the man page entry for --no-replay and --replay-window for more info or silence this warning with --mute-replay-warnings" Not sure what is the correct setting for mssfix issue.

sudo docker run -d \
--name Openvpn \
--cap-add=NET_ADMIN \
--network=mynet \
--dns 8.8.8.8 \
--dns 8.8.4.4 \
--restart=unless-stopped \
-v /srv/dev-disk-by-label-HDA/AppData/Openvpn:/config \
-v /etc/openvpn/vpnunlimited/default.ovpn:/etc/openvpn/vpnunlimited/default.ovpn \
-v /srv/dev-disk-by-label-HDA/Downloads:/data \
-v /etc/localtime:/etc/localtime:ro \
-e CREATE_TUN_DEVICE=true \
-e PUID=1000 \
-e PGID=100 \
-e OPENVPN_PROVIDER=VPNUNLIMITED \
-e OPENVPN_CONFIG=(your config) \
-e OPENVPN_USERNAME=(your email) \
-e OPENVPN_PASSWORD=(your password) \
-e OPENVPN_OPTS="--inactive 3600 --ping 10 --ping-exit 60" \
-e WEBPROXY_ENABLED=true \
-e TUN_MTU=1500 \
-e MSSFIX=1300 \
-e LOCAL_NETWORK=192.168.0.0/24 \
-p 9091:9091 \
haugene/transmission-openvpn:latest-armhf