I had a RAID 5 setup with 3 drives, 1x2TB, 1x3TB and 1x4TB, I removed the 2TB so I could replace it with a larger drive, so I put in a 4TB drive and started a rebuild, but after it finished the storage capacity did not increase.
Did I mess this up or is there something I have to do to "unlock" the capacity?
RAID 5 rebuild
-
- OMV 5.x
- gelöst
- uhmidk
-
You need to grow the array then grow the filesystem.
-
I don't know what the grow array tab is. Do you mean the Raid Management tab? If you don't see an array in that tab, something is wrong with your array.
-
If you manually (from the command line) added the drive and started the rebuild, you will have to manually grow the array.
-
The add button grows the array I think. What size does the raid management tab say the array is?
-
I don't know what your array name is but the following should grow the array:
mdadm --grow /dev/md0 --size=max -
Thank you! now growing to 5.27TB
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!