Hi all,
This is a new SnapRAID setup. And also my first ever. I am using 2 data drives (which are together in a UnionFS) and 1 parity drive.
I've started copying files over and started playing around to see what all the commands do, everything seems fine except for this message 'The 100% of the array is not scrubbed.'
Code
Self test...
Loading state from /srv/dev-disk-by-label-D1/snapraid.content...
Using 37 MiB of memory for the file-system.
SnapRAID status report:
Files Fragmented Excess Wasted Used Free Use Name
Files Fragments GB GB GB
561 1 1 0.1 262 4697 5% SR2
593 0 0 0.1 263 4697 5% SR3
--------------------------------------------------------------------------
1154 1 1 0.2 525 9394 5%
100%|o
|o
|o
|o
|o
|o
|o
50%|o
|o
|o
|o
|o
|o
|o
0%|o_____________________________________________________________________
0 days ago of the last scrub/sync 0
The oldest block was scrubbed 0 days ago, the median 0, the newest 0.
No sync is in progress.
The 100% of the array is not scrubbed.
No file has a zero sub-second timestamp.
No rehash is in progress or needed.
No error detected.
Alles anzeigen
I try to do a manual scrub, but the output says that there is nothing to scrub. So what is going on?