SOLVED:
Seams to be my computer, i get good speed from other netshares from the network but not just the openmediavaul, tested the speed from another computer against openmedivault and i got good speed.
Hi,
Iam a new user to openmediavault, i got my self a hp n54L with 4x1TB disk and 2gb memory.
I have done everything manually in the web interface and was wondering if i am doing any thing wrong because the speed seams to be slow with smb.
I get around 48mb/sec writing to the box and around 32mb/sec reading from it.
The cpu isnt over 30% when reading/writing.
The memory isnt over 10% when reading/writing.
NAS performance tester 1.4 http://www.808.dk/?nastester
Running warmup...
Running a 100MB file write on drive Y: 5 times...
Iteration 1: 47,01 MB/sec
Iteration 2: 49,70 MB/sec
Iteration 3: 47,16 MB/sec
Iteration 4: 51,65 MB/sec
Iteration 5: 47,61 MB/sec
------------------------------
Average (W): 48,63 MB/sec
------------------------------
Running a 100MB file read on drive Y: 5 times...
Iteration 1: 34,20 MB/sec
Iteration 2: 32,18 MB/sec
Iteration 3: 29,92 MB/sec
Iteration 4: 34,49 MB/sec
Iteration 5: 30,80 MB/sec
------------------------------
Average (R): 32,32 MB/sec
------------------------------
Here is some info.
Raid 5 with ext4.
ethtool eth0:
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: 1000Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: Unknown
Supports Wake-on: g
Wake-on: g
Current message level: 0x000000ff (255)
Link detected: yes
Alles anzeigen
For disk i use:
ST100DM003