DisplayLink Think Pad

    • DisplayLink Think Pad

      hey guys i have this display link attached to my faulty asustor nas running OMV the lan ports are buggered i am wondering if i need to install the files from
      displaylink.com/downloads/ubuntu
      no idea how to install it, should i so omv can see the hub properly
      not sure if this will make a difference in speed if it picks it up, i was going to buy a usb to ethernet but i have this for now, not sure if i need to install the file but any help would be great.
      currently this system is a j1800 celeron, pushing 55MB/s on raid, i had similar speeds in ubuntu and windows maybe the celeron is just to weak to push past 80MB/s drives are in raid in windows it shows Read: 121MB/s Write: 106MB/s these are older drives for setup and testing atm.

      currently its just giving me this
      --------------------------------------------------------------------------------
      Interface information enx6c0b842593ce:
      ======================================
      Settings for enx6c0b842593ce:
      Current message level: 0x00000007 (7)
      drv probe link
      Link detected: yes
      --------------------------------------------------------------------------------
      Driver information enx6c0b842593ce:
      ===================================
      driver: cdc_ncm
      version: 22-Aug-2005
      firmware-version: CDC NCM
      expansion-rom-version:
      bus-info: usb-0000:00:14.0-1.2.1
      supports-statistics: yes
      supports-test: no
      supports-eeprom-access: no
      supports-register-dump: no
      supports-priv-flags: no

      ================================================================================
      = IP packet filter
      ================================================================================
      IPv4:
      =====
      Chain INPUT (policy ACCEPT)
      target prot opt source destination

      Chain FORWARD (policy ACCEPT)
      target prot opt source destination

      Chain OUTPUT (policy ACCEPT)
      target prot opt source destination
      --------------------------------------------------------------------------------
      IPv6:
      =====
      Chain INPUT (policy ACCEPT)
      target prot opt source destination

      Chain FORWARD (policy ACCEPT)
      target prot opt source destination

      Chain OUTPUT (policy ACCEPT)
      target prot opt source destination



      THANKS FOR THE ANY HELP :thumbsup: