EXT4 Samba Perfect but NTFS Samba really slow !!!!

  • RPI 4 and USB 3.0
    ---------------------------------


    EXT4 file system:
    - Read from RPI4 = 110 mb/s
    - Copy to RPI4 = 90 mb/s


    NTFS
    - Read from RPI4 = 70 mb/s
    - Copy to RPI4 = 25 mb/s


    What is happening ?¿?¿?


    Regards

    • Offizieller Beitrag

    You are using a non-Linux native filesystem on Linux. That is why you shouldn't ntfs on Linux.

    omv 7.0.4-2 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.10 | compose 7.1.2 | k8s 7.0-6 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • You are using a non-Linux native filesystem on Linux. That is why you shouldn't ntfs on Linux.

    Thanks a lot for your help


    Im searching 2 days about this problem..... (I really need NTFS cause windows dont have any support for EXT4).


    There is any driver or update for the NTFS.3g , or improvement that can be applied?


    RPI4 is only using 60% cpu while copy in NTFS, so, This is not a Bottleneck in the CPU.....




    Regards

    • Offizieller Beitrag

    (I really need NTFS cause windows dont have any support for EXT

    If you have a NAS, there should be no reason to plugin this drive back into a Windows system ever again. That said, there are Windows utilities for ext out there.


    There is any driver or update for the NTFS.3g , or improvement that can be applied?


    RPI4 is only using 60% cpu while copy in NTFS, so, This is not a Bottleneck in the CPU.....

    Not that I know of. There is a lot of overhead using ntfs on linux. Not sure where you are seeing 60% but if I am guessing where you read that correctly, that is two cpus.

    omv 7.0.4-2 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.10 | compose 7.1.2 | k8s 7.0-6 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!