OMV 5.2.5-1 (Usul) on BananaPi successfully installed

omavoss · 27. Januar 2020

Hi all,
here I have successfully installed OMV 5.2.5-1 on BananaPi.

However, I completely reinstalled and did not upgrade. The label "Upgrade ..." is misleading in this respect, but must be selected.
Many thanks to @ryecoaaron for the installation script, which allows you to install OMV under Armbian without any problems. Even the media configured under OMV 4.x could be integrated again without any problems.

Ich habe allerdings völlig neu installiert und kein Upgrade ausgeführt. Das Label "Upgrade ..." ist insofern irreführend, muss aber ausgewählt werden.
Vielen Dank an @ryecoaaron für das Installations-Script, mit dessen Hilfe man OMV völlig problemlos unter Armbian installieren kann. Selbst die unter OMV 4.x konfigurierten Datenträger konnten problemlos wieder integriert werden.

Many friendly greetings.
Viele freundliche Grüße.

leiden · 7. März 2020

Bonjour OMAVOOS,

Congratulations for having successfully installed OMV5 on your BananaPi.

I personally have a BananaPro. 2 days ago, OMV crashed for some reasons. I suspect the SD card but this is not the point.
I've tried many times to install Armbian10 & OMV 5 as described in "Adden-A-Installing_OMV5_on_Armbian.pdf" :
- flash Armbian on SD Card,
- start Bananapro,
- update & upgrade Armbian,
- Aaron script : wget -O - https://github.com/OpenMediaVa…Script/raw/master/install | sudo bash

I always get errors about missing dependencies .
Could you let me know the way you success ?

Thank you in advance !!

ryecoaaron · 7. März 2020

Zitat von leiden

I always get errors about missing dependencies

If you don't post the errors, no one can help you.

macom · 7. März 2020

I get on a bananapi

Code

lsb-release is already the newest version (10.2019051400).
lsb-release set to manually installed.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
bash: line 83: lsb_release: command not found
bash: line 84: lsb_release: command not found
Unsupported version.  Exiting...

Edit: purged and installed lsb-releasenow the script is running

Edit2: script completed without errors

leiden · 7. März 2020

OK, I've understood and found my mistake: I've tried to install OMV 5 on a Stretch version of Armbian...
This evening I tried again from the beginning: I went back on Armbian website and saw something I've missed last time : download page suggest Bionic & Stretch but at the bottom there is a link to "check other download options".
Buster is available there, and you know what ? It works perfect when installing OMV 5 on it using the script (thank you Aaron for this)
Now OMV 5.3.7-1 is running on my bananaPro.
Next step is setting up everything.

Thank you all for your replies and sorry for having made this mistake ...

Jetzt mitmachen!