System hanging for about a minute at startup and shutdown

  • So on startup, I receive the following error.


    A start job is running for folder2ram systemd service (27s / no limit).

    The 27 seconds bounces back to 30s for about 30 seconds (never counts down to 0, goes down to like 25 at lowest then goes back to 30) and then will continue to boot like normal.


    When I go to shutdown, I am met with these errors.


    Failed unmounting /var/log.
    Failed unmounting /Home. (This is my ZFS mountpoint)
    Failed unmounting /var/folder2ram/var/log.


    The system will hang there for about a minute before finally shutting down. Does anyone have any ideas what could be causing this?

    Case: U-NAS NSC-810
    Motherboard: ASRock - C236 WSI Mini ITX
    CPU: Core i7-6700
    Memory: 32GB Crucial DDR4-2133

  • In the past I had such a delay during boot while a ZFS scrub was running in the background. But it was not related to folder2ram.

    OMV 3.0.100 (Gray style)

    ASRock Rack C2550D4I C0-stepping - 16GB ECC - 6x WD RED 3TB (ZFS 2x3 Striped RaidZ1) - Fractal Design Node 304 -

    3x WD80EMAZ Snapraid / MergerFS-pool via eSATA - 4-Bay ICYCube MB561U3S-4S with fan-mod

  • @elastic


    Does your system run on an SD card?
    Because only then will folder2ram make sense...

    [LibreELEC @ 2x RPi3, CoreELEC @ S12 Octa Core]

    [ NAS OMV 5.xx (Usul) @ NanoPI M4 ]

    [ Nextcloud 18.0.4 @ ODROID C2 ]

    [ Motioneye @ RPi4]

  • In the past I had such a delay during boot while a ZFS scrub was running in the background. But it was not related to folder2ram.

    I disabled auto scrubs.

    @elastic


    Does your system run on an SD card?
    Because only then will folder2ram make sense...

    No it runs off of an SSD though and I remember a few people still recommending folder2ram for SSD's because of the frequent writes the OS makes.

    Case: U-NAS NSC-810
    Motherboard: ASRock - C236 WSI Mini ITX
    CPU: Core i7-6700
    Memory: 32GB Crucial DDR4-2133

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!