missing network-driver for installation

  • Hello,
    after testing OMV in my VM I want to test it in real life :)
    I bought a Gigabyte GA-H97N-WIFI ( http://www.gigabyte.de/product…uct-page.aspx?pid=4992#ov ) motherboard with an i3-4130t and want to install OMV.
    The installation aborted because the network driver is missing. The e1000e for the intel network card didn't work. I tested all other drivers, too. No positive result.
    After that fail I tested the board with the actual live-debian CD. Network card works.
    My tested OMV Version is 0.5.48_amd64. The live CD is debian-7.6.0-amd64.
    I tried to add the driver in installation progress but it failed -> The USB-Stick and the external HDD didn't work.
    Next test was installing the live version to the harddrive and OMV in addition (I used this instruction: http://www.och-group.de/2013/0…achtraglich-installieren/ ).
    But it failed... again, because some packages are missing :/


    I thought OMV is based on an actual debian? Why is the driver in OMV missing?


    How can I install OMV with the correct drivers? Best would be when I can use both network cards ... :)

  • Yeah... you tested Debian 7, while OpenMediaVault Sardaukar (0.5) is based on Debian 6... Thats the reason your network driver may be missing.


    So install Kralizec on your Debian 7 now.


    Greetings
    David

    "Well... lately this forum has become support for everything except omv" [...] "And is like someone is banning Google from their browsers"


    Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.

    Upload Logfile via WebGUI/CLI
    #openmediavault on freenode IRC | German & English | GMT+1
    Absolutely no Support via PM!

    • Offizieller Beitrag


    If the Debian 7 CD is recognizing your network card:


    Download the Netinst ISO for Debian Wheezy from Debian's website
    https://www.debian.org/devel/debian-installer/


    During the install, it will ask you if you want to install a desktop, etc.. You can just uncheck everything on that page.


    After the netinstall is done, run these commands one at a time:


    Code
    echo "deb http://packages.openmediavault.org/public kralizec main" > /etc/apt/sources.list.d/openmediavault.list
    apt-get update
    apt-get install openmediavault-keyring postfix
    apt-get update
    apt-get install openmediavault
    omv-initsystem


    Reference this post on the old forum http://phpbb.openmediavault.or…d9483d637&start=20#p43944


    That's what I did, and it worked fine. You should be able to log in to the webUI w/ your servers IP address at that point.


    Edit: Just realized you installed Debian (I assume Debian 7).. if you don't mind having the Desktop, etc.. then you can just add the OMV repo in the instructions above, and install OMV.


    Hope that helps

  • Hello KM0201,
    I tried the netinstall with the commands, too (I used this instruction: http://www.och-group.de/2013/0…achtraglich-installieren/ )
    I will try to write Kralizec like david2k said:


    echo "deb http://packages.openmediavault.org/public Kralizec main" > /etc/apt/sources.list.d/openmediavault.list
    apt-get update
    apt-get install openmediavault-keyring postfix
    apt-get update
    apt-get install openmediavault
    omv-initsystem


    Hope it will work If I change Sardaukar to Kralizec
    I'll test it on Thursday and report.


    thanks

    • Offizieller Beitrag

    It works, THANK YOU...
    these names are a bit confusing for me.... it would be easyer if there were a name AND a number of the correct linux distribution :)


    Cough.. who said something about matching OMV version numbers to it's Debian counterpart for this exact reason? :)

  • "Well... lately this forum has become support for everything except omv" [...] "And is like someone is banning Google from their browsers"


    Only two things are infinite, the universe and human stupidity, and I'm not sure about the former.

    Upload Logfile via WebGUI/CLI
    #openmediavault on freenode IRC | German & English | GMT+1
    Absolutely no Support via PM!

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!