Is it possible to show temperatures (cpu) in OMV 1.0?
Is there an easy plugin for a newbie?
Is it possible to show temperatures (cpu) in OMV 1.0?
Is there an easy plugin for a newbie?
Not as of yet, but it would be a great addition. However, is not a priority as of right now unless someone with skills wants to contribute writing a plugin for it. So in short, not right now.
Pardon to correct you Spy, but the Plugin is already in the making by jhmiller, cpu temp is one of the first things thats working, but jhmiller still has to fix some bugs.
Greetings
David
Well I stand corrected, I must have missed it. There's your answer Joq3!
ZitatPlease test and report any issues here
Access denied
Installed sensors on latest kralizec. Modified modules (chip was found). Restarted
# /etc/init.d/kmod start
Loading kernel module loop.
Loading kernel module jc42.
From this moment the access to dashboard and services got stuck. Uninstalled the module and services and dashboard works. During uninstall there was a error popup, unfortunately i lost the msg.
click the link and report the issue in that thread. I think I know what is wrong but want to keep all info in I topic.
as said before:
Access denied. You’re not authorized to view this page.
(when i click on the link)
Sorry, I forgot that is a dev forum that you do not have access to, its nice to be special
Did you run /etc/init.d/kmod start or did the system do it automatically?
Also did you run sensors-detect?
If you could re-install and give the output of the following 3 commands
see the output in my post above
Modified modules (chip was found). Restarted
Where did you see this?
# /etc/init.d/kmod start
Loading kernel module loop.
Loading kernel module jc42.
When was this run?
This is the only info you have given me and none of it is to do with the plugin, It will not show what it has found and it will not run /etc/init.d/kmod
If you install the plugin and get the error that came up, also do nothing in cli, the plugin will do all that is needed.
Installed the plugin, followed the instructions in the plugin installer window (installing and starting the kernel modules).
Will try it again this WE and give u feedback
Here we go, installed the plugin again:
Reading package lists...
Building dependency tree...
Reading state information...
The following NEW packages will be installed:
openmediavault-sensors
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/52.2 kB of archives.
After this operation, 221 kB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
openmediavault-sensors
Authentication warning overridden.
Selecting previously unselected package openmediavault-sensors.
(Reading database ... 49427 files and directories currently installed.)
Unpacking openmediavault-sensors (from .../openmediavault-sensors_1.0.2_all.deb) ...
Processing triggers for openmediavault ...
Restarting engine daemon ...
Setting up openmediavault-sensors (1.0.2) ...
Initial configuration.
Restarting statistics collection and monitoring daemon: collectdModule cpuid loaded successfully.
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... Success!
(driver `k10temp')
AMD Family 11h thermal sensors... No
AMD Family 12h and 14h thermal sensors... No
AMD Family 15h thermal sensors... No
AMD Family 15h power sensors... No
Intel digital thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor/ITE'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Found `IPMI BMC KCS'... Success!
(confidence 8, driver `to-be-written')
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Using driver `i2c-piix4' for device 0000:00:14.0: ATI Technologies Inc SB600/SB700/SB800 SMBus
Module i2c-dev loaded successfully.
Processing triggers for openmediavault ...
Updating locale files ...
Client found at address 0x18
Handled by driver `jc42' (already loaded), chip type `jc42'
Client found at address 0x19
Handled by driver `jc42' (already loaded), chip type `jc42'
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Probing for `EDID EEPROM'... No
Client found at address 0x51
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... .
Yes
(confidence 8, not a hardware monitoring chip)
Client found at address 0x49
Probing for `National Semiconductor LM75'... No
Probing for `National Semiconductor LM75A'... No
Probing for `Dallas Semiconductor DS75'... No
Probing for `National Semiconductor LM77'... No
Probing for `Analog Devices ADT7410'... No
Probing for `Dallas Semiconductor DS1621/DS1631'... No
Probing for `Maxim MAX6642'... No
Probing for `National Semiconductor LM73'... No
Probing for `National Semiconductor LM92'... No
Probing for `National Semiconductor LM76'... No
Probing for `Maxim MAX6633/MAX6634/MAX6635'... No
Probing for `NXP/Philips SA56004'... No
Probing for `SMSC EMC1023'... No
Probing for `SMSC EMC1043'... No
Probing for `SMSC EMC1053'... No
Probing for `SMSC EMC1063'... No
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Probing for `EDID EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Updating file permissions ...
Restarting engine daemon ...
Creating index of upgradeable packages ...
Creating index of OpenMediaVault plugins ...
Driver `jc42':
* Bus `SMBus PIIX4 adapter at 0b00'
Busdriver `i2c_piix4', I2C address 0x18
Chip `jc42' (confidence: 6)
* Bus `SMBus PIIX4 adapter at 0b00'
Busdriver `i2c_piix4', I2C address 0x19
Chip `jc42' (confidence: 6)
Driver `to-be-written':
* ISA bus
Chip `IPMI BMC KCS' (confidence: 8)
Driver `k10temp' (autoloaded):
* Chip `AMD Family 10h thermal sensors' (confidence: 9)
Note: there is no driver for IPMI BMC KCS yet.
Check [url]http://www.lm-sensors.org/wiki/Devices[/url] for updates.
To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
jc42
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!
Successful!
Monitoring programs won't work until the needed modules are
loaded. You may want to run '/etc/init.d/kmod start'
to load them.
Unloading i2c-dev... OK
Unloading cpuid... OK
Done ...
Alles anzeigen
--->
made change to /etc/modules
did /etc/init.d/kmod start
enabled cpu monitor
--->
Clicking on services brings only the wheel of death
Dtto on dashboard
On Status page i see Temperature but just unhappy icons
---
got during install two messages (email):
Description: process PID changed from 24996 to 6865
Description: process PID changed from 6865 to 7268
EDIT: reboot doesnt help
module seems to be loaded (lsmod output):
i2c_core 24228 6 drm,jc42,i2c_piix4,drm_kms_helper,i2c_algo_bit,radeon
k10driver was found by probe sensors, seems to be there but not used by anything:
k10temp 12618 0
Zitatalso do nothing in cli, the plugin will do all that is needed.
To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
jc42
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!
Successful!
This message should be ignored, In the first version that script was not run until you enabled the plugin and so it was run in the background, I forgot I moved it to run on install.
Remove the entries from /etc/modules, and run
you may also need to restart
This will undo what you did manually after that, disable the cpu temp and then enable it (generates new configuration files) then check the status page.
please also do
Removed entry in modules, did rmmod, restarted system
After this i disabled and enabled cpu temp several times:
1. still wheel of death
2. no temperature tab in status
during this steps got status mails about collectd (not exist/exist/change of pid)
---
# sensors
k10temp-pci-00c3
Adapter: PCI adapter
temp1: +44.5°C (high = +70.0°C)
(crit = +100.0°C, hyst = +95.0°C)
# ls /var/lib/rrdcached/db/localhost/sensors-*/
/var/lib/rrdcached/db/localhost/sensors-jc42-i2c-0-18/:
temperature-temp1.rrd
/var/lib/rrdcached/db/localhost/sensors-jc42-i2c-0-19/:
temperature-temp1.rrd
/var/lib/rrdcached/db/localhost/sensors-k10temp-pci-00c3/:
temperature-temp1.rrd
# cat /proc/cpuinfo
processor : 0
vendor_id : AuthenticAMD
cpu family : 16
model : 6
model name : AMD Turion(tm) II Neo N54L Dual-Core Processor
stepping : 3
microcode : 0x10000c8
cpu MHz : 800.000
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt nodeid_msr hw_pstate npt lbrv svm_lock nrip_save
bogomips : 4392.99
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
processor : 1
vendor_id : AuthenticAMD
cpu family : 16
model : 6
model name : AMD Turion(tm) II Neo N54L Dual-Core Processor
stepping : 3
microcode : 0x10000c8
cpu MHz : 800.000
cache size : 1024 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
apicid : 1
initial apicid : 1
fpu : yes
fpu_exception : yes
cpuid level : 5
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt nodeid_msr hw_pstate npt lbrv svm_lock nrip_save
bogomips : 4392.99
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 48 bits physical, 48 bits virtual
power management: ts ttp tm stc 100mhzsteps hwpstate
#
Alles anzeigen
EDIT: even with enabled cpu temp there is no entry in modules (in case your scripts should create one there)
pm me ur email pls, its getting to long here:
Message is too long, must be below 10,000 characters.
Any news? Did you get my logs?
He has been busy but is still working on the plugin
I see the graph but the Temp Values are:
0.5 Min 7.93 Avg 18.30 Max 6.20 Last
The values are to small?!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!