Hi guys,
I'm fighting for some time now with my desired network configuration which includes WIFI.
I use:
Code
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: AzureWave AW-NE785 / AW-NE785H 802.11bgn Wireless Full or Half-size Mini PCIe Card
Kernel driver in use: ath9kThe problem right now is, that iw wlan0 scan shows nothing:
Code
root@sarah:~# iw wlan0 scan
root@sarah:~#I followed https://wiki.archlinux.org/index.php/Wireless up to this point.
It states, that the problem could be the regulatory domain. Output of NAS:
Code
root@sarah:~# iw reg get
country 00:
(2402 - 2472 @ 40), (N/A, 20)
(2457 - 2482 @ 40), (N/A, 20), PASSIVE-SCAN, NO-IBSS
(2474 - 2494 @ 20), (N/A, 20), NO-OFDM, PASSIVE-SCAN, NO-IBSS
(5170 - 5250 @ 160), (N/A, 20), PASSIVE-SCAN, NO-IBSS
(5250 - 5330 @ 160), (N/A, 20), DFS, PASSIVE-SCAN, NO-IBSS
(5490 - 5730 @ 160), (N/A, 20), DFS, PASSIVE-SCAN, NO-IBSS
(5735 - 5835 @ 80), (N/A, 20), PASSIVE-SCAN, NO-IBSS
(57240 - 63720 @ 2160), (N/A, 0)And the output of my notebook which uses the same WIFI:
Code
Elcattivo elcattivo # iw reg get
country CA:
(2402 - 2472 @ 40), (3, 27)
(5170 - 5250 @ 40), (3, 17)
(5250 - 5330 @ 40), (3, 20), DFS
(5490 - 5710 @ 40), (3, 20), DFS
(5735 - 5835 @ 40), (3, 30)
Elcattivo elcattivo # iw wlan0 link
Connected to 0c:37:dc:39:47:19 (on wlan0)
SSID: 3WebCube4717
freq: 2462
RX: 6109 bytes (55 packets)
TX: 2881 bytes (33 packets)
signal: -73 dBm
tx bitrate: 1.0 MBit/s
bss flags: short-preamble short-slot-time
dtim period: 3
beacon int: 100Which looks fine to me.
Any help would be greatly appreciated.
Thanks,
El-Cattivo