SABnzbd installation error

1. offizieller Beitrag

    Hi all,


    I installed the omvextraplugin then enabled the secondary downloader plugins before installing SickBeard which installed fine.


    I then tried to install SABnzbd which failed with the following error:


    Reading package lists...
    Building dependency tree...
    Reading state information...
    The following NEW packages will be installed:
    openmediavault-sabnzbd
    0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
    Need to get 0 B/16.5 kB of archives.
    After this operation, 141 kB of additional disk space will be used.
    WARNING: The following packages cannot be authenticated!
    openmediavault-sabnzbd
    Authentication warning overridden.
    Selecting previously unselected package openmediavault-sabnzbd.
    (Reading database ... 42901 files and directories currently installed.)
    Unpacking openmediavault-sabnzbd (from .../openmediavault-sabnzbd_1.0.3_all.deb) ...
    Processing triggers for openmediavault ...
    Restarting engine daemon ...
    Setting up openmediavault-sabnzbd (1.0.3) ...
    Adding sabnzbd user...
    dpkg: error processing openmediavault-sabnzbd (--configure):
    subprocess installed post-installation script returned error exit status 4
    Processing triggers for openmediavault ...
    Restarting engine daemon ...
    Errors were encountered while processing:
    openmediavault-sabnzbd


    I rebooted, uninstalled all plugins including the omvextra plugin, reinstalled etc but still get the same error.


    I'm running kernel 3.16-0.bpo.2-amd64, Version 1.1 Kralizec.


    I googled this and found a few posts but they discuss running commands etc which all went over my head.


    I assume I can us terminal on my Mac and use SSH to connect to OMV and run such commands?


    EDIT: I reinstalled OMV from scratch but the problem persists although the log now contains more entries than before:


    Reading package lists...
    Building dependency tree...
    Reading state information...
    The following extra packages will be installed:
    git git-man libcurl3-gnutls liberror-perl librtmp0 libssh2-1 par2 python
    python-cheetah python-configobj python-feedparser python-minimal
    python-openssl python-support python-yenc python2.7 python2.7-minimal unrar
    unzip
    Suggested packages:
    git-daemon-run git-daemon-sysvinit git-doc git-el git-arch git-cvs git-svn
    git-email git-gui gitk gitweb python-doc python-tk python-markdown
    python-pygments python-memcache python-openssl-doc python-openssl-dbg
    python2.7-doc binfmt-support zip
    Recommended packages:
    patch less python-libxml2 python-chardet python-utidylib
    The following NEW packages will be installed:
    git git-man libcurl3-gnutls liberror-perl librtmp0 libssh2-1
    openmediavault-sabnzbd par2 python python-cheetah python-configobj
    python-feedparser python-minimal python-openssl python-support python-yenc
    python2.7 python2.7-minimal unrar unzip
    0 upgraded, 20 newly installed, 0 to remove and 13 not upgraded.
    Need to get 14.2 MB of archives.
    After this operation, 36.0 MB of additional disk space will be used.
    WARNING: The following packages cannot be authenticated!
    librtmp0 libssh2-1 libcurl3-gnutls python2.7-minimal python2.7
    python-minimal python python-support liberror-perl git-man git
    python-cheetah python-configobj python-feedparser par2 python-openssl
    python-yenc unzip unrar openmediavault-sabnzbd
    Authentication warning overridden.
    Get:1 http://ftp.uk.debian.org/debian/ wheezy/main librtmp0 amd64 2.4+20111222.git4e06e21-1 [62.3 kB]
    Get:2 http://dh2k.omv-extras.org/debian/ kralizec-miller/main unrar amd64 1:5.0.10-1 [138 kB]
    Get:3 http://security.debian.org/ wheezy/updates/main libcurl3-gnutls amd64 7.26.0-1+wheezy11 [322 kB]
    Get:4 http://ftp.uk.debian.org/debian/ wheezy/main libssh2-1 amd64 1.4.2-1.1 [133 kB]
    Get:5 http://ftp.uk.debian.org/debian/ wheezy/main python2.7-minimal amd64 2.7.3-6+deb7u2 [1785 kB]
    Get:6 http://dh2k.omv-extras.org/debian/ kralizec-miller/main openmediavault-sabnzbd all 1.0.3 [16.5 kB]
    Get:7 http://ftp.uk.debian.org/debian/ wheezy/main python2.7 amd64 2.7.3-6+deb7u2 [2728 kB]
    Get:8 http://ftp.uk.debian.org/debian/ wheezy/main python-minimal all 2.7.3-4+deb7u1 [42.8 kB]
    Get:9 http://ftp.uk.debian.org/debian/ wheezy/main python all 2.7.3-4+deb7u1 [181 kB]
    Get:10 http://ftp.uk.debian.org/debian/ wheezy/main python-support all 1.0.15 [33.6 kB]
    Get:11 http://ftp.uk.debian.org/debian/ wheezy/main liberror-perl all 0.17-1 [23.6 kB]
    Get:12 http://ftp.uk.debian.org/debian/ wheezy/main git-man all 1:1.7.10.4-1+wheezy1 [1074 kB]
    Get:13 http://ftp.uk.debian.org/debian/ wheezy/main git amd64 1:1.7.10.4-1+wheezy1 [6683 kB]
    Get:14 http://ftp.uk.debian.org/debian/ wheezy/main python-cheetah amd64 2.4.4-3 [204 kB]
    Get:15 http://ftp.uk.debian.org/debian/ wheezy/main python-configobj all 4.7.2+ds-4 [237 kB]
    Get:16 http://ftp.uk.debian.org/debian/ wheezy/main python-feedparser all 5.1.2-1 [62.0 kB]
    Get:17 http://ftp.uk.debian.org/debian/ wheezy/main par2 amd64 0.4-11 [102 kB]
    Get:18 http://ftp.uk.debian.org/debian/ wheezy/main python-openssl amd64 0.13-2+deb7u1 [175 kB]
    Get:19 http://ftp.uk.debian.org/debian/ wheezy/main python-yenc amd64 0.3+debian-2+b2 [19.8 kB]
    Get:20 http://ftp.uk.debian.org/debian/ wheezy/main unzip amd64 6.0-8 [194 kB]
    Fetched 14.2 MB in 4s (3067 kB/s)
    Selecting previously unselected package librtmp0:amd64.
    (Reading database ... 40787 files and directories currently installed.)
    Unpacking librtmp0:amd64 (from .../librtmp0_2.4+20111222.git4e06e21-1_amd64.deb) ...
    Selecting previously unselected package libssh2-1:amd64.
    Unpacking libssh2-1:amd64 (from .../libssh2-1_1.4.2-1.1_amd64.deb) ...
    Selecting previously unselected package libcurl3-gnutls:amd64.
    Unpacking libcurl3-gnutls:amd64 (from .../libcurl3-gnutls_7.26.0-1+wheezy11_amd64.deb) ...
    Selecting previously unselected package python2.7-minimal.
    Unpacking python2.7-minimal (from .../python2.7-minimal_2.7.3-6+deb7u2_amd64.deb) ...
    Selecting previously unselected package python2.7.
    Unpacking python2.7 (from .../python2.7_2.7.3-6+deb7u2_amd64.deb) ...
    Selecting previously unselected package python-minimal.
    Unpacking python-minimal (from .../python-minimal_2.7.3-4+deb7u1_all.deb) ...
    Selecting previously unselected package python.
    Unpacking python (from .../python_2.7.3-4+deb7u1_all.deb) ...
    Selecting previously unselected package python-support.
    Unpacking python-support (from .../python-support_1.0.15_all.deb) ...
    Selecting previously unselected package liberror-perl.
    Unpacking liberror-perl (from .../liberror-perl_0.17-1_all.deb) ...
    Selecting previously unselected package git-man.
    Unpacking git-man (from .../git-man_1%3a1.7.10.4-1+wheezy1_all.deb) ...
    Selecting previously unselected package git.
    Unpacking git (from .../git_1%3a1.7.10.4-1+wheezy1_amd64.deb) ...
    Selecting previously unselected package python-cheetah.
    Unpacking python-cheetah (from .../python-cheetah_2.4.4-3_amd64.deb) ...
    Selecting previously unselected package python-configobj.
    Unpacking python-configobj (from .../python-configobj_4.7.2+ds-4_all.deb) ...
    Selecting previously unselected package python-feedparser.
    Unpacking python-feedparser (from .../python-feedparser_5.1.2-1_all.deb) ...
    Selecting previously unselected package par2.
    Unpacking par2 (from .../archives/par2_0.4-11_amd64.deb) ...
    Selecting previously unselected package python-openssl.
    Unpacking python-openssl (from .../python-openssl_0.13-2+deb7u1_amd64.deb) ...
    Selecting previously unselected package python-yenc.
    Unpacking python-yenc (from .../python-yenc_0.3+debian-2+b2_amd64.deb) ...
    Selecting previously unselected package unzip.
    Unpacking unzip (from .../archives/unzip_6.0-8_amd64.deb) ...
    Selecting previously unselected package unrar.
    Unpacking unrar (from .../unrar_1%3a5.0.10-1_amd64.deb) ...
    Selecting previously unselected package openmediavault-sabnzbd.
    Unpacking openmediavault-sabnzbd (from .../openmediavault-sabnzbd_1.0.3_all.deb) ...
    Processing triggers for man-db ...
    Processing triggers for mime-support ...
    Processing triggers for openmediavault ...
    Restarting engine daemon ...
    Setting up librtmp0:amd64 (2.4+20111222.git4e06e21-1) ...
    Setting up libssh2-1:amd64 (1.4.2-1.1) ...
    Setting up libcurl3-gnutls:amd64 (7.26.0-1+wheezy11) ...
    Setting up python2.7-minimal (2.7.3-6+deb7u2) ...
    Setting up python2.7 (2.7.3-6+deb7u2) ...
    Setting up python-minimal (2.7.3-4+deb7u1) ...
    Setting up python (2.7.3-4+deb7u1) ...
    Setting up python-support (1.0.15) ...
    Setting up liberror-perl (0.17-1) ...
    Setting up git-man (1:1.7.10.4-1+wheezy1) ...
    Setting up git (1:1.7.10.4-1+wheezy1) ...
    Setting up python-cheetah (2.4.4-3) ...
    Setting up python-configobj (4.7.2+ds-4) ...
    Setting up python-feedparser (5.1.2-1) ...
    Setting up par2 (0.4-11) ...
    Setting up python-openssl (0.13-2+deb7u1) ...
    Setting up python-yenc (0.3+debian-2+b2) ...
    Setting up unzip (6.0-8) ...
    Setting up unrar (1:5.0.10-1) ...
    update-alternatives: using /usr/bin/unrar-nonfree to provide /usr/bin/unrar (unrar) in auto mode
    Setting up openmediavault-sabnzbd (1.0.3) ...
    Adding sabnzbd user...
    dpkg: error processing openmediavault-sabnzbd (--configure):
    subprocess installed post-installation script returned error exit status 4
    Processing triggers for python-support ...
    Processing triggers for openmediavault ...
    Restarting engine daemon ...
    Errors were encountered while processing:
    openmediavault-sabnzbd



    Would really appreciate some help.


    Thanks

    Please wait until the plugin has been updated to version 1.0.4, During the install it sends out a command to find the latest version, this checks the links on the sabnzbd's download page, if (like they have done) change the links format or order this command fails and so the plugin does not know what version to download.


    I have fixed it but will look into a more robust solution.


    Sorry for the trouble this has caused.


    Miller

    [align=center]banner@1x.jpg
    What I am watching/watched on my Popcorn Hour media player
    omv 2.1.1 stoneburner | 64 bit | omvextrasorg 1.29
    MySQL (Percona[size=8]) | Newznab | Sonarr | CP | HP | NZBget | YAMJ | CUPS

    • Offizieller Beitrag

    1.0.4 is in the repo now.

    omv 7.0.5-1 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.11 | compose 7.1.3 | k8s 7.1.0-3 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    Thanks ryecoaaron, I just found a more robust method and had hopped that 1.0.4 was not yet built. I will leave it as is for now and if this happens again test the new method against the current one to see if it does work better.

    [align=center]banner@1x.jpg
    What I am watching/watched on my Popcorn Hour media player
    omv 2.1.1 stoneburner | 64 bit | omvextrasorg 1.29
    MySQL (Percona[size=8]) | Newznab | Sonarr | CP | HP | NZBget | YAMJ | CUPS

    My goodness, you guys are super awesome! I just updated the plugin and then reinstalled SABnzbd and now it's working perfectly without any errors!


    These are sexy times we live in! Thank you kindly.

    • Offizieller Beitrag
    Zitat von jhmiller

    Thanks ryecoaaron, I just found a more robust method and had hopped that 1.0.4 was not yet built. I will leave it as is for now and if this happens again test the new method against the current one to see if it does work better.


    I can push a new version if you want :)

    omv 7.0.5-1 sandworm | 64 bit | 6.5 proxmox kernel

    plugins :: omvextrasorg 7.0 | kvm 7.0.11 | compose 7.1.3 | k8s 7.1.0-3 | cputemp 7.0 | mergerfs 7.0.3


    omv-extras.org plugins source code and issue tracker - github - changelogs


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    We try our best ;)


    Just noticed that it was SABnzbd was updated again to 0.7.20 it looks like they reverted back to the original method of showing the new version and that's what broke the plugin, anybody running 1.0.3 of the plugin will need to update to 1.0.4 before clicking the update button in the plugin.

    [align=center]banner@1x.jpg
    What I am watching/watched on my Popcorn Hour media player
    omv 2.1.1 stoneburner | 64 bit | omvextrasorg 1.29
    MySQL (Percona[size=8]) | Newznab | Sonarr | CP | HP | NZBget | YAMJ | CUPS

    Zitat von ryecoaaron

    I can push a new version if you want


    Best leave it for now as it should be ok until they release another version, even then it still might be ok if they keep to the same format of showing the version numbers.
    I might also change how the update button is displayed from hidden to disabled as not showing it will not alert people to its presence, showing it will let people see there is a way to update SABnzbd.

    [align=center]banner@1x.jpg
    What I am watching/watched on my Popcorn Hour media player
    omv 2.1.1 stoneburner | 64 bit | omvextrasorg 1.29
    MySQL (Percona[size=8]) | Newznab | Sonarr | CP | HP | NZBget | YAMJ | CUPS

    If there is an update then a button will appear on the plugin page, click it and it will update SAB.

    [align=center]banner@1x.jpg
    What I am watching/watched on my Popcorn Hour media player
    omv 2.1.1 stoneburner | 64 bit | omvextrasorg 1.29
    MySQL (Percona[size=8]) | Newznab | Sonarr | CP | HP | NZBget | YAMJ | CUPS

    EDIT: Please ignore, I installed extplorer and was able to copy the script to my share and it also allowed me to rename! Excellent plugin! :D


    Sorry for double post but not sure if editing the above post would notify Admins or mark the thread as unread.


    jhmiller, I followed your advice on another thread (phpbb, is that a completely separate forum to this one?) regarding SABnzbd and SickBeard script which I found in the opt folder as you mentioned. I point SABnzbd to the autoprocesstv folder and SAVE settings but when I go back to Folder settings, the field is blank as the changes aren't saved. I guess this is due to file permissions as per error below. I gave the SABnzbd user access to ADM (is that admin) but still get the error.


    I heard that the autoprocesstv script also needs to be renamed as I believe its called autoprocesstv.sample.cfg by default.


    So I need to rename the script in the OPT folder and also allow SABnzbd access to the folder/file.


    How can I access system files? If i can access system files perhaps it might be easier to just copy the file to my share which SABnzbd already has access to as its where it downloads data to?


    2014-11-23 04:37:43,347 ERROR: script_dir directory: /opt/sickbeard/autoProcessTV error accessing


    I'm almost there chap. Cheers.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!

Benutzerkonto erstellen Anmelden