openmediavault-virtualbox problem

  • hmmmm,
    error again, it is not a new install. server has been running for several years...
    this is the last part of the output...


    Removing linux-image-2.6-amd64 ...
    Removing linux-image-2.6.32-5-amd64 ...
    Examining /etc/kernel/postrm.d .
    run-parts: executing /etc/kernel/postrm.d/initramfs-tools 2.6.32-5-amd64 /boot/vmlinuz-2.6.32-5-amd64
    update-initramfs: Deleting /boot/initrd.img-2.6.32-5-amd64
    run-parts: executing /etc/kernel/postrm.d/zz-lilo 2.6.32-5-amd64 /boot/vmlinuz-2.6.32-5-amd64
    Warning: LBA32 addressing assumed
    Warning: BIOS device code 0x89 is used (>0x87). It indicates more disks
    than those represented in '/proc/partitions' having actual partitions.
    Booting results may be unpredictable.
    Added Linux *
    Skipping /vmlinuz.old
    2 warnings were issued.
    run-parts: executing /etc/kernel/postrm.d/zz-update-grub 2.6.32-5-amd64 /boot/vmlinuz-2.6.32-5-amd64
    Generating grub.cfg ...
    Found linux image: /boot/vmlinuz-3.2.0-0.bpo.4-amd64
    Found initrd image: /boot/initrd.img-3.2.0-0.bpo.4-amd64
    done
    The link /vmlinuz.old is a damaged link
    Removing symbolic link vmlinuz.old
    You may need to re-run your boot loader
    The link /initrd.img.old is a damaged link
    Removing symbolic link initrd.img.old
    You may need to re-run your boot loader
    Removing linux-image-3.2.0-0.bpo.4-amd64 ...
    Aborting removal of running kernel image.
    dpkg: error processing linux-image-3.2.0-0.bpo.4-amd64 (--remove):
    subprocess installed pre-removal script returned error exit status 1
    configured to not write apport reports
    dpkg: initramfs-tools: dependency problems, but removing anyway as you requested:
    linux-image-3.2.0-0.bpo.4-amd64 depends on initramfs-tools (>= 0.99~) | linux-initramfs-tool; however:
    Package initramfs-tools is to be removed.
    Package linux-initramfs-tool is not installed.
    Package initramfs-tools which provides linux-initramfs-tool is to be removed.
    linux-image-3.2.0-0.bpo.4-amd64 depends on initramfs-tools (>= 0.99~) | linux-initramfs-tool; however:
    Package initramfs-tools is to be removed.
    Package linux-initramfs-tool is not installed.
    Package initramfs-tools which provides linux-initramfs-tool is to be removed.
    Removing initramfs-tools ...
    Errors were encountered while processing:
    linux-image-3.2.0-0.bpo.4-amd64
    E: Sub-process /usr/bin/dpkg returned an error code (1)

  • You need to unplug that sata cables for the data drives before you install. Just have the system drive plugged in. After you install OMV 1.20 shutdown and then plug back in the data drives.


    If it will not install with just the system drive burn an ISO of GParted to disk. Boot to Gparted and wipe the system disk. Then try.

  • Fixed!
    I stopped the update to v1.0.2 and started a new installation. All went smooth and virtualbox is running as it should now..
    Now with a new clean install I have tried to recover the missing/corrupt partition on sdc.
    Using testdisk I was able to retrieve the partition table and rewrite it to the disk and... all my data is back!


    Feels good to be able to end the year on a good note :)


    Thx for all the help guys!
    And a good end of the year!


    Regards
    A.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!