Can not Mound Hdd

  • Hi DipSwitch,



  • You are using a single hard disk as data storage?


    Can any data on the disk be removed?


    If you want to use one disk for data. I think, the problem is that somehow it is setup a RAID array. You could in the left menu go to: "Storage" -> "RAID Management" and remove the RAID array. /dev/md0 in this case.
    After that your disk will be visible as /dev/sdb where you can format it I guess.


    And maybe it's wise to reinstall OVM to the 320GB disk? Now OVM runs on the 500GB drive. The 320GB disk will be your data disk. You can't put any data on OVM disk, so that would result in 150GB thrown away :)

    • Offizieller Beitrag

    This question has been answered hundreds of times is even in the wiki. If you want to use a single disk, you need to partition that disk, after that you'll have space to use in omv services. Boot systemrescuecd or gparted with a usb flash drive and repartition the drive

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!