Boot Fails ... Flash-Plugin? USB-Mount?

tekkb · 21. Juni 2015

Zitat von mipi

I rebooted to halt and brought up again, its working

Does this mean the openmediavault folder is surviving the reboot and you get OMV's web gui login???

PS- Please realize I usually am doing 10 things at once. I do not go back and read everything.

mipi · 21. Juni 2015

How shall I determine, if my ssd is good (Samsung 830) ...

S.M.A.R.T. tells this: (Mann, was für ein Akt, das im Bios zu finden ... ;-)) )

Code

smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.16.0-0.bpo.4-amd64] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net


=== START OF INFORMATION SECTION ===
Model Family:     Samsung based SSDs
Device Model:     SAMSUNG SSD 830 Series
Serial Number:    S0Z3NEACA12312
LU WWN Device Id: 5 002538 043584d30
Firmware Version: CXM03B1Q
User Capacity:    128,035,676,160 bytes [128 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ACS-2 revision 2
Local Time is:    Sun Jun 21 15:11:21 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled


=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED


General SMART Values:
Offline data collection status:  (0x83)    Offline data collection activity
                    is in a Reserved state.
                    Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)    The previous self-test routine completed
                    without error or no self-test has ever
                    been run.
Total time to complete Offline
data collection:         (  540) seconds.
Offline data collection
capabilities:              (0x5b) SMART execute Offline immediate.
                    Auto Offline data collection on/off support.
                    Suspend Offline collection upon new
                    command.
                    Offline surface scan supported.
                    Self-test supported.
                    No Conveyance Self-test supported.
                    Selective Self-test supported.
SMART capabilities:            (0x0003)    Saves SMART data before entering
                    power-saving mode.
                    Supports SMART auto save timer.
Error logging capability:        (0x01)    Error logging supported.
                    General Purpose Logging supported.
Short self-test routine
recommended polling time:      (   2) minutes.
Extended self-test routine
recommended polling time:      (   9) minutes.


SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAGS    VALUE WORST THRESH FAIL RAW_VALUE
  5 Reallocated_Sector_Ct   PO--CK   100   100   010    -    0
  9 Power_On_Hours          -O--CK   099   099   000    -    3607
 12 Power_Cycle_Count       -O--CK   099   099   000    -    395
177 Wear_Leveling_Count     PO--C-   099   099   000    -    23
179 Used_Rsvd_Blk_Cnt_Tot   PO--C-   100   100   010    -    0
181 Program_Fail_Cnt_Total  -O--CK   100   100   010    -    0
182 Erase_Fail_Count_Total  -O--CK   100   100   010    -    0
183 Runtime_Bad_Block       PO--C-   100   100   010    -    0
187 Uncorrectable_Error_Cnt -O--CK   100   100   000    -    0
190 Airflow_Temperature_Cel -O--CK   069   037   000    -    31
195 ECC_Error_Rate          -O-RC-   200   200   000    -    0
199 CRC_Error_Count         -OSRCK   253   253   000    -    11
235 POR_Recovery_Count      -O--C-   099   099   000    -    103
241 Total_LBAs_Written      -O--CK   099   099   000    -    2165594782
                            ||||||_ K auto-keep
                            |||||__ C event count
                            ||||___ R error rate
                            |||____ S speed/performance
                            ||_____ O updated online
                            |______ P prefailure warning


General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
GP/S  Log at address 0x00 has    1 sectors [Log Directory]
GP/S  Log at address 0x01 has    1 sectors [Summary SMART error log]
GP/S  Log at address 0x02 has    2 sectors [Comprehensive SMART error log]
GP/S  Log at address 0x03 has    2 sectors [Ext. Comprehensive SMART error log]
GP/S  Log at address 0x06 has    1 sectors [SMART self-test log]
GP/S  Log at address 0x07 has    2 sectors [Extended self-test log]
GP/S  Log at address 0x09 has    1 sectors [Selective self-test log]
GP/S  Log at address 0x10 has    1 sectors [NCQ Command Error]
GP/S  Log at address 0x11 has    1 sectors [SATA Phy Event Counters]
GP/S  Log at address 0x80 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x81 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x82 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x83 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x84 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x85 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x86 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x87 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x88 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x89 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8a has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8b has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8c has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8d has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8e has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8f has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x90 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x91 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x92 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x93 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x94 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x95 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x96 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x97 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x98 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x99 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9a has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9b has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9c has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9d has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9e has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9f has   16 sectors [Host vendor specific log]


SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
No Errors Logged


SMART Extended Self-test Log Version: 1 (2 sectors)
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%      3325         -
# 2  Short offline       Completed without error       00%      3325         -
# 3  Short offline       Completed without error       00%        19         -


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.


Warning: device does not support SCT Commands
SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x0001  2           11  Command failed due to ICRC error
0x0002  2        49152  R_ERR response for data FIS
0x0003  2        53248  R_ERR response for device-to-host data FIS
0x0004  2        57344  R_ERR response for host-to-device data FIS
0x0005  2         7952  R_ERR response for non-data FIS
0x0006  2         2562  R_ERR response for device-to-host non-data FIS
0x0007  2         4096  R_ERR response for host-to-device non-data FIS
0x0008  2         7952  Device-to-host non-data FIS retries
0x0009  2         7953  Transition from drive PhyRdy to drive PhyNRdy
0x000a  2         3170  Device-to-host register FISes sent due to a COMRESET
0x000b  2         6145  CRC errors within host-to-device FIS
0x000d  2         7953  Non-CRC errors within host-to-device FIS
0x000f  2         8176  R_ERR response for host-to-device data FIS, CRC
0x0010  2           15  R_ERR response for host-to-device data FIS, non-CRC
0x0012  2        49153  R_ERR response for host-to-device non-data FIS, CRC
0x0013  2        12112  R_ERR response for host-to-device non-data FIS, non-CRC

Alles anzeigen

tekkb · 21. Juni 2015

SMART overall-health self-assessment test result: PASSED

They are good SSDs. Aaron uses them a lot. I use Intel and Crucials.

mipi · 21. Juni 2015

Zitat von tekkb

SMART overall-health self-assessment test result: PASSED

however SMART determines this, and that?

Code

241 Total_LBAs_Written      -O--CK   099   099   000    -    2165594782

tekkb · 21. Juni 2015

You might find this helpful.

http://www.jdgleaver.co.uk/blo…_written_under_linux.html

mipi · 21. Juni 2015

Looks verrrry interessting, but ... apt-get install bc ... produces:

Code

Diese Pakete ohne Überprüfung installieren [j/N]? j
Building local package repository ...
sh: 1: cd: can't cd to /var/cache/openmediavault/archives
E: Problem executing scripts DPkg::Pre-Invoke '. /etc/default/openmediavault; if [ ! -e ${OMV_DPKGARCHIVE_DIR}/Packages ]; then echo Building local package repository ...; cd ${OMV_DPKGARCHIVE_DIR} && apt-ftparchive packages . > Packages; fi'
E: Sub-process returned an error code

made dir /var/cache/openmediavault/archives and it worked with throwing some errors ... work to do?

tekkb · 21. Juni 2015

This stat is more important. Here is one of my SSDs failing:

Program Fail Cnt Total90194771981 (Normalized: 100)

mipi · 21. Juni 2015

Grins ... die is hin! This parrot is dead!

tekkb · 21. Juni 2015

hehe... I have 2 Intel 530s in the box.

Archives folder:
chmod 755
chown openmediavault:openmediavault

tekkb · 21. Juni 2015

cd /var/cache/openmediavault/archives
touch Packages
chmod 644 Packages
chown openmediavault:openmediavault Packages

mipi · 21. Juni 2015

wilco ... some more? ;-))

tekkb · 21. Juni 2015

Give list of /var/cache

ls -la /var/cache

mipi · 21. Juni 2015

Take this ...

Code

ls -la /var/cache 
insgesamt 4
drwxrwxrwt  6 root           root            120 Jun 21 15:36 .
drwxr-xr-x 13 root           root           4096 Jun 15 16:21 ..
drwxr-xr-x  3 root           root            100 Jun 21 16:01 apt
drwxrwxr-x  3 root           davfs2           60 Jun 21 13:35 davfs2
drwxr-xr-x  2 root           root            120 Jun 21 13:45 fontconfig
drwxr-xr-x  3 openmediavault openmediavault  100 Jun 21 15:40 openmediavault
root@omv:/var/cache#

mipi · 21. Juni 2015

and :

Code

root@omv:/var/cache/openmediavault# ls -al
insgesamt 16
drwxr-xr-x 3 openmediavault openmediavault   100 Jun 21 15:40 .
drwxrwxrwt 6 root           root             120 Jun 21 15:36 ..
drwxr-xr-x 2 openmediavault openmediavault    60 Jun 21 15:40 archives
-rw-r--r-- 1 openmediavault openmediavault 10913 Jun 21 14:39 cache.omvwebgui_admin_js.json
-rw-r--r-- 1 openmediavault openmediavault   283 Jun 21 14:37 cache.omvwebguilogin_js.json
root@omv:/var/cache/openmediavault#

tekkb · 21. Juni 2015

It seems you could be missing some more stuff. Whether it will be regenerated I don't know. We should have Aaron take a look and see what he says....

@ryecoaaron

I'm going to take out that old SSD.
C-ya

ryecoaaron · 21. Juni 2015

Is there any errors after omv-mkconf omvextrasorg aptclean

mipi · 21. Juni 2015

some more hungry mouth to feed ...

not able to post the output here, more then 10000 chars

but i can't see errrors, some "IGN", some "removed ..." seems to be normal. Is there a way to post it?

ryecoaaron · 21. Juni 2015

You don't need to post it. Just any errors Did it help? Hard to tell what is working and what isn't at this point.

mipi · 21. Juni 2015

I' wondering if i did something wrong or if the installed Plugins did something bad.

There was was plenty like:
Ign http://packages.omv-extras.org kralizec-plex/main Translation-en

and some like:
removed `/var/lib/apt/lists/security.debian.org_dists_wheezy_updates_Release'

No errors i think ... is my dir-Structure as posted above ok?

Behavior of the frontend is now ok ...

ryecoaaron · 21. Juni 2015

I don't think you did anything wrong. Seems like the json cache gets screwed up sometimes and the command I gave you clears it.

Jetzt mitmachen!