I've got an plexpas account but how do i change the plex server with the paid version, i dont get it.
Where do i get the .deb file from and how do i change/reinstall this over the standard version?
Plex Media Server
-
-
See my instructions on this link. They are on my 2nd post on this page.
http://forums.openmediavault.o….php?f=13&t=1203&start=70
It will tell you everything you have to do. Make sure you are logged into the plex forums when you follow my link to retrieve the plexpass version upgrade.
-
Zitat von "tekkbebe"
See my instructions on this link. They are on my 2nd post on this page.
http://forums.openmediavault.o….php?f=13&t=1203&start=70
It will tell you everything you have to do. Make sure you are logged into the plex forums when you follow my link to retrieve the plexpass version upgrade.
That's what i needed, thanks!
-
Noob question.
Lurker long time.
I followed the steps in some posts here (thanx) to put Plex in my OMV. That was May June of 2013. Well Plex is now gone commercial and it needs out of my OMV! Does way to much tracking and sucks bandwidth when it does, tracks ya when only using in house network too! NO GOOD Plex!
My OMV 4.38
Hoping there are some manual steps or a tute to get rid of it all. Can do from terminal.
Many thanx.
-
-
Gaidge, did you share your library with someone? If not this is total nonsense what you are saying.
-
-
Zitat von "tekkbebe"
If not this is total nonsense what you are saying.
To tekkbebeDo not believe? Look router logs. Why many IP talk to Plex? Only use in house. Find owner IP. Not amazon as think! See http://www.donottrackplus.com/trackers/amazonaws.com.php & http://www.webmasterworld.com/…ngine_spiders/3828718.htm No want BOTS on house network!
Plex go commercial. Look https://en.wikipedia.org/wiki/Plex_%28software%29 from site "Plex began as a freeware hobby project but since 2010 has evolved into a commercial software business that is owned and developed by a single for-profit startup company, Plex, Inc"
Early Plex good. Plex now like Google - Evil
Try change Plex port from 32400 - can't do, hard set. Why?
Plex is very poor security to me.
-
I can look at my interface graphs.... if you have issue with bandwidth you got some other issue, not plex. Maybe you should look at transmission.
-
-
Hello, sorry for being dumb, but how do I install openmediavault-plexmediaserver plugin from omv-extras.org repo? It's not on the list of available plugins even though I do have omv-extras.org repo configured (so I resorted to minidlna which is on the list).
I'm on sardaukar. -
Have you enabled the Plex repository under the omv-extras plugin?
If yes, there is more than one page of plugins. So take a look at site two -
Now that was really dumb :oops:
Thank you. -
You´re welcome
-
Good night everyone on this great forum, I've been following this forum from years ago and until now I am registering!
I love OMV, and I've learned a lot but still a newbie. I have a noob question regarding to PMS:
I installed PMS and cannot make it work with a new hard drive I installed on my server. I can make it work only mounting my portable hard drive then Plex update the library fast, but this won't happen when I add my 1TB hard drive. This is driving me nuts, I know it's something with permissions but I can't figure it out!
However, I just want to stream locally at home, not over the Internet. Can you help me? I'm running Sardaukar 0.5.43 BTW.
Best Regards.
Charlie
-
Give me full paths of where your media is on the old drive and the new drive. You just need to create symmlinks in the old media folders that links to new folders on new drive. Or you can use grehole or aufs plugins to create a pool of your drives.
-
Thanks for replying Tekkbebe, I'm your fan!
Here's my situation: I have sda, sdb, sdc. sda for system, sdb is a small drive for stuff, sdc is a new HDD i just installed and I have a couple of movies there that I want to stream over Plex. Also I own a Portable Hard Drive where I have more movies and clips, I want to copy from portable hard drive to sdc and make that hard drive the main place for my movies. I followed the plex instructions and everything is good until I choose the movies path on sdc and the media scan finishes too quick, like the system thinks is nothing there!
I hope this can help, if you need me to run any command just let me know which command please.
Code/dev/sdb1 on /media/476bdedd-889f-499d-8c0a-567a4f612cd8 type ext4 (rw,noexec,_netdev,acl,user_xattr,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0) /dev/sdc1 on /media/0de0156e-928b-4bf4-ab43-bc14ad33c3f6 type ext4 (rw,noexec,_netdev,acl,user_xattr,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0)
Thank you!
Charlie
-
Charlie, the path to where your Movies are located. The above just gives the root of your data drives.
-
-
So that is the new drive? Now give me the path where the Movies are on the old drive that are working with Plex.
Jetzt mitmachen!
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!