WD problem

  • Hello,


    Normally i used 2 tb hdd on my OMV system. I share this hdd in my home. Yesterday, i bought new 6TB WD hdd, but when i connect it with usb drive. I can not see my hdd on webgui. I try to my other computer. Everything is working purely. Is there any suggest to fix this problem. <X

    • Official Post

    It isn't showing up in Physical Disks? Can you post the output of a command (as root)? fdisk -l

    omv 6.1.1-1 Shaitan | 64 bit | 5.19 proxmox kernel | plugins :: omvextrasorg 6.1.1 | kvm 6.2.6 | compose 6.4.2 | mergerfs 6.3.4 | zfs 6.0.12
    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • It isn't showing up in Physical Disks? Can you post the output of a command (as root)? <code class="inlineCode">fdisk -l</code>



    Disk /dev/mmcblk0: 14.9 GiB, 15931539456 bytes, 31116288 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disklabel type: dos
    Disk identifier: 0x9f732a23


    Device Boot Start End Sectors Size Id Type
    /dev/mmcblk0p1 2048 43007 40960 20M 83 Linux
    /dev/mmcblk0p2 43008 7744511 7701504 3.7G 83 Linux

    • Official Post

    RPi? Did the 6tb drive come as a external usb drive?

    omv 6.1.1-1 Shaitan | 64 bit | 5.19 proxmox kernel | plugins :: omvextrasorg 6.1.1 | kvm 6.2.6 | compose 6.4.2 | mergerfs 6.3.4 | zfs 6.0.12
    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

    • Official Post

    Look at my pic :) Taken from Amazon page.

    Images

    omv 6.1.1-1 Shaitan | 64 bit | 5.19 proxmox kernel | plugins :: omvextrasorg 6.1.1 | kvm 6.2.6 | compose 6.4.2 | mergerfs 6.3.4 | zfs 6.0.12
    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • Actually i am not found same product i just send a sample. I want to show what i will try. Here is the new output when i mount 2tb hdd in OMV. Onthe other hand, When i will mount 6tb hdd on dock, windows and mac are also see my hdd.


    Disk /dev/sda: 1.8 TiB, 2000398934016 bytes, 3907029168 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disklabel type: dos
    Disk identifier: 0x0003e0dc


    Device Boot Start End Sectors Size Id Type
    /dev/sda1 2048 3907024895 3907022848 1.8T 7 HPFS/NTFS/exFAT

    • Official Post

    Oh. I thought you were posting the dock you were using. I have a couple of external docks so I am very familiar with them.


    Plug the 6tb drive in, wait 30 secs, and post the output of: dmesg | tail -n 30

    omv 6.1.1-1 Shaitan | 64 bit | 5.19 proxmox kernel | plugins :: omvextrasorg 6.1.1 | kvm 6.2.6 | compose 6.4.2 | mergerfs 6.3.4 | zfs 6.0.12
    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • Oh. I thought you were posting the dock you were using. I have a couple of external docks so I am very familiar with them.


    Plug the 6tb drive in, wait 30 secs, and post the output of: dmesg | tail -n 30


    here is the your output
    [ 2846.826394] ehci_irq: port change detect
    [ 2846.830436] usb 1-1: USB disconnect, device number 7
    [ 2864.779118] ehci_irq: port change detect
    [ 2865.059997] usb 1-1: new high-speed USB device number 8 using sw-ehci
    [ 2865.221726] usb 1-1: New USB device found, idVendor=152d, idProduct=2352
    [ 2865.236435] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
    [ 2865.249636] usb 1-1: Product: USB to ATA/ATAPI Bridge
    [ 2865.259860] usb 1-1: Manufacturer: JMicron
    [ 2865.269616] usb 1-1: SerialNumber: DCAA5639019F
    [ 2865.282311] scsi5 : usb-storage 1-1:1.0
    [ 2866.308039] scsi 5:0:0:0: Direct-Access WDC WD20 EARS-00MVWB0 PQ: 0 ANSI: 2 CCS
    [ 2866.333532] sd 5:0:0:0: Attached scsi generic sg0 type 0
    [ 2866.577587] sd 5:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
    [ 2866.593258] sd 5:0:0:0: [sda] Write Protect is off
    [ 2866.605234] sd 5:0:0:0: [sda] Mode Sense: 34 00 00 00
    [ 2866.614712] sd 5:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
    [ 2866.656017] sda: sda1
    [ 2866.669499] sd 5:0:0:0: [sda] Attached SCSI disk
    [ 2922.286268] ehci_irq: port change detect
    [ 2922.290314] usb 1-1: USB disconnect, device number 8
    [ 2959.943945] ehci_irq: port change detect
    [ 2960.222131] usb 1-1: new high-speed USB device number 9 using sw-ehci
    [ 2960.383850] usb 1-1: New USB device found, idVendor=152d, idProduct=2352
    [ 2960.400874] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=5
    [ 2960.416380] usb 1-1: Product: USB to ATA/ATAPI Bridge
    [ 2960.419455] usb 1-1: Manufacturer: JMicron
    [ 2960.428006] usb 1-1: SerialNumber: D31DC46FFFFF
    [ 2960.449659] scsi6 : usb-storage 1-1:1.0
    [ 2961.469704] scsi 6:0:0:0: Direct-Access WDC WD60 EFRX-68MYMN1 PQ: 0 ANSI: 2 CCS
    [ 2961.491215] sd 6:0:0:0: Attached scsi generic sg0 type 0


    give me 2 min to find my dock model.I will reply
    Edit:
    http://www.amazon.com/Thermalt…fRID=0WS68NKNFWN42Y6XKTVA

    • Official Post

    That only supports 2tb drives as well according to the page you linked to. Are you trying to put both drives in a once? Did you try just the 6tb?

    omv 6.1.1-1 Shaitan | 64 bit | 5.19 proxmox kernel | plugins :: omvextrasorg 6.1.1 | kvm 6.2.6 | compose 6.4.2 | mergerfs 6.3.4 | zfs 6.0.12
    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • That only supports 2tb drives as well according to the page you linked to. Are you trying to put both drives in a once? Did you try just the 6tb?


    I try too many options. right now. i connected only 6tb drive on OMV. It my support 2TB but it will work with Win 10 and MAC. How it is possible
    How about this one is it work with my OMV and also How can i see this box on my system. Is it show all hdd in one volume or it shows seperetly


    http://www.amazon.com/dp/B00V5…7K43&coliid=IFHC2WHJ0X4XV


    http://www.amazon.com/dp/B00V5…7K43&coliid=IFHC2WHJ0X4XV
    Acutally i have 4 different(6tb-4TB-4TB-2TB) WD HDD and i want to collect all of thsese in one box and want to share these HDD on my network. Do you have any suggestion for me. I mean which dock or idea good for me

    • Official Post

    Not sure what the problem is. Maybe the RPi doesn't support a 6tb NTFS formatted drive?? I don't use NTFS on Linux. I would be curious to see if it recognized the drive if it was formatted ext4.

    omv 6.1.1-1 Shaitan | 64 bit | 5.19 proxmox kernel | plugins :: omvextrasorg 6.1.1 | kvm 6.2.6 | compose 6.4.2 | mergerfs 6.3.4 | zfs 6.0.12
    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • Not sure what the problem is. Maybe the RPi doesn't support a 6tb NTFS formatted drive?? I don't use NTFS on Linux. I would be curious to see if it recognized the drive if it was formatted ext4.


    Acutally i have 4 different(6tb-4TB-4TB-2TB) WD HDD and i want to collect all of thsese in one box and want to share these HDD on my network. Do you have any suggestion for me. I mean which dock or idea good for me


    http://www.amazon.com/dp/B00V5…7K43&coliid=IFHC2WHJ0X4XV

    • Official Post

    Before you can pick a dock, you need to figure out if NTFS is causing the problem. I really wouldn't use NTFS on OMV. Use a native Linux filesystem. I don't own that dock but one comment on Amazon says it works with Linux. No idea if it works with an RPi. Buy me one and I will test it for you :D

    omv 6.1.1-1 Shaitan | 64 bit | 5.19 proxmox kernel | plugins :: omvextrasorg 6.1.1 | kvm 6.2.6 | compose 6.4.2 | mergerfs 6.3.4 | zfs 6.0.12
    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • Before you can pick a dock, you need to figure out if NTFS is causing the problem. I really wouldn't use NTFS on OMV. Use a native Linux filesystem. I don't own that dock but one comment on Amazon says it works with Linux. No idea if it works with an RPi. Buy me one and I will test it for you :D


    i also use this 6tb hdd on my fedora laptop. When i connect with usb. It is work purely. I do not understand what is the problem. May be somebody can help me

    • Official Post

    Just because the RPi is running Linux does not mean it has all the same drivers/modules/characteristics as other distros. An RPi is an arm processor that is very different from your laptop. If it works with your dock with a 2tb drive formatted ntfs and does not work with a 6tb drive formatted ntfs, this means the 6tb drive and/or ntfs that size is incompatible with the RPi and/or its current kernel. Not much you can do about it.


    I would try the drive with a linux filesystem. If it works with a 6tb linux filesystem, that will answer your question. If not, then the RPi doesn't support 6tb drives with that dock. I searched but couldn't find anyone trying to connect a drive that large to an RPi. Maybe you can get more help on the RPi forum. This may be a Raspbian issue but isn't an OMV issue.

    omv 6.1.1-1 Shaitan | 64 bit | 5.19 proxmox kernel | plugins :: omvextrasorg 6.1.1 | kvm 6.2.6 | compose 6.4.2 | mergerfs 6.3.4 | zfs 6.0.12
    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • Just because the RPi is running Linux does not mean it has all the same drivers/modules/characteristics as other distros. An RPi is an arm processor that is very different from your laptop. If it works with your dock with a 2tb drive formatted ntfs and does not work with a 6tb drive formatted ntfs, this means the 6tb drive and/or ntfs that size is incompatible with the RPi and/or its current kernel. Not much you can do about it.


    I would try the drive with a linux filesystem. If it works with a 6tb linux filesystem, that will answer your question. If not, then the RPi doesn't support 6tb drives with that dock. I searched but couldn't find anyone trying to connect a drive that large to an RPi. Maybe you can get more help on the RPi forum. This may be a Raspbian issue but isn't an OMV issue.


    My HDD is full. So i can`t try too much things. I have a dream :). I want create 2 partition on my hdd and i may solve my problem. but i can not try right now. I need to solve this problem

    • Official Post

    If you can't change anything about the drive, then you will probably have to use a different system other than the RPi. Just about any old desktop would work until you can do something with the drive.

    omv 6.1.1-1 Shaitan | 64 bit | 5.19 proxmox kernel | plugins :: omvextrasorg 6.1.1 | kvm 6.2.6 | compose 6.4.2 | mergerfs 6.3.4 | zfs 6.0.12
    omv-extras.org plugins source code and issue tracker - github


    Please try ctrl-shift-R and read this before posting a question.

    Please put your OMV system details in your signature.
    Please don't PM for support... Too many PMs!

  • If you can't change anything about the drive, then you will probably have to use a different system other than the RPi. Just about any old desktop would work until you can do something with the drive.


    Right now i try 3tb+2tb HDD in same dock. It works right now



    Disk /dev/sdb: 1.8 TiB, 2000398934016 bytes, 3907029168 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disklabel type: dos
    Disk identifier: 0x0003e0dc


    Device Boot Start End Sectors Size Id Type
    /dev/sdb1 2048 3907024895 3907022848 1.8T 7 HPFS/NTFS/exFAT


    Disk /dev/sda: 2.7 TiB, 3000592982016 bytes, 5860533168 sectors
    Units: sectors of 1 * 512 = 512 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disklabel type: gpt
    Disk identifier: 9B31E9F7-AC8B-4DB9-9324-783D74C92CB6


    Device Start End Sectors Size Type
    /dev/sda1 2048 5860532223 5860530176 2.7T Microsoft basic data



    these two works great but if i connect only 6 TB it cannot work :S

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!