Hello Lads,
don't know what to do anymore.
As i didn't had enough space in my rig anymore ( 4x WD Red 3 TB + 1x WD Red 3 TB as Parity ) i added 3 news HDD's ( 2x WD Green 3 TB + 1 WD Green 3 TB as parity ).
I added in Snapraid the additional drives etc but Snapraid sync was not working and recommended me to do a full sync with the comand: snapraid -F sync
Now after a around one hour sync abort with the following error:
Code
kernel: [ 6810.747411] Buffer I/O error on device sdh1, logical block 216859776I've then checked the disk in OMV and i've seen 4 of my data disk show no more S.M.A.R.T stats.
So i asked Dr. Google and many ppl. say this is a signal my HardDisk is going to die.
Well 4 HDD at the same time ? Sorry i can't believe this.
I checked them with CrystalDisk and WD Tool and according to these tools they work properly.
If i umount and mount these disks again everything works fine.
When im now checking syslog is found this:
Code
Mar 4 20:09:01 fritznas /USR/SBIN/CRON[5561]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -x /usr/lib/php5/sessionclean ] && [ -d /var/lib/php5 ] && /usr/lib/php5/sessionclean /var/lib/php5 $(/usr/lib/php5/maxlifetime))
Mar 4 20:09:52 fritznas kernel: [ 1252.141167] ata11.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x6 frozen
Mar 4 20:09:52 fritznas kernel: [ 1252.141281] ata11.00: failed command: WRITE FPDMA QUEUED
Mar 4 20:09:52 fritznas kernel: [ 1252.141391] ata11.00: cmd 61/20:78:68:3b:86/00:00:ae:00:00/40 tag 15 ncq 16384 out
Mar 4 20:09:52 fritznas kernel: [ 1252.141395] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Mar 4 20:09:52 fritznas kernel: [ 1252.141617] ata11.00: status: { DRDY }
Mar 4 20:09:52 fritznas kernel: [ 1252.141738] ata11: hard resetting link
Mar 4 20:09:52 fritznas kernel: [ 1252.472652] ata11: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Mar 4 20:09:52 fritznas kernel: [ 1252.474511] ata11.00: configured for UDMA/133
Mar 4 20:09:52 fritznas kernel: [ 1252.474525] ata11.00: device reported invalid CHS sector 0
Mar 4 20:09:52 fritznas kernel: [ 1252.474545] ata11: EH complete
Mar 4 21:41:39 fritznas kernel: [ 6750.750689] ata11.00: exception Emask 0x0 SAct 0x800000 SErr 0x0 action 0x6 frozen
Mar 4 21:41:39 fritznas kernel: [ 6750.750766] ata11.00: failed command: WRITE FPDMA QUEUED
Mar 4 21:41:39 fritznas kernel: [ 6750.750817] ata11.00: cmd 61/20:b8:60:bc:86/00:00:ae:00:00/40 tag 23 ncq 16384 out
Mar 4 21:41:39 fritznas kernel: [ 6750.750821] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Mar 4 21:41:39 fritznas kernel: [ 6750.750945] ata11.00: status: { DRDY }
Mar 4 21:41:39 fritznas kernel: [ 6750.750987] ata11: hard resetting link
Mar 4 21:41:44 fritznas kernel: [ 6756.110439] ata11: link is slow to respond, please be patient (ready=0)
Mar 4 21:41:49 fritznas kernel: [ 6760.751349] ata11: COMRESET failed (errno=-16)
Mar 4 21:41:49 fritznas kernel: [ 6760.751397] ata11: hard resetting link
Mar 4 21:41:54 fritznas kernel: [ 6766.111136] ata11: link is slow to respond, please be patient (ready=0)
Mar 4 21:41:59 fritznas kernel: [ 6770.760065] ata11: COMRESET failed (errno=-16)
Mar 4 21:41:59 fritznas kernel: [ 6770.760114] ata11: hard resetting link
Mar 4 21:42:04 fritznas kernel: [ 6776.119854] ata11: link is slow to respond, please be patient (ready=0)
Mar 4 21:42:10 fritznas kernel: [ 6781.743289] ata12.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x6 frozen
Mar 4 21:42:10 fritznas kernel: [ 6781.743362] ata12.00: failed command: WRITE FPDMA QUEUED
Mar 4 21:42:10 fritznas kernel: [ 6781.743412] ata12.00: cmd 61/18:78:40:b9:86/00:00:ae:00:00/40 tag 15 ncq 12288 out
Mar 4 21:42:10 fritznas kernel: [ 6781.743415] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Mar 4 21:42:10 fritznas kernel: [ 6781.743538] ata12.00: status: { DRDY }
Mar 4 21:42:10 fritznas kernel: [ 6781.743580] ata12: hard resetting link
Mar 4 21:42:10 fritznas kernel: [ 6781.743604] ata9.00: exception Emask 0x0 SAct 0x6 SErr 0x0 action 0x6 frozen
Mar 4 21:42:10 fritznas kernel: [ 6781.743658] ata9.00: failed command: READ FPDMA QUEUED
Mar 4 21:42:10 fritznas kernel: [ 6781.743707] ata9.00: cmd 60/00:08:00:a8:50/02:00:6a:00:00/40 tag 1 ncq 262144 in
Mar 4 21:42:10 fritznas kernel: [ 6781.743710] res 40/00:46:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Mar 4 21:42:10 fritznas kernel: [ 6781.743833] ata9.00: status: { DRDY }
Mar 4 21:42:10 fritznas kernel: [ 6781.743871] ata9.00: failed command: READ FPDMA QUEUED
Mar 4 21:42:10 fritznas kernel: [ 6781.743919] ata9.00: cmd 60/00:10:00:aa:50/02:00:6a:00:00/40 tag 2 ncq 262144 in
Mar 4 21:42:10 fritznas kernel: [ 6781.743922] res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
Mar 4 21:42:10 fritznas kernel: [ 6781.744045] ata9.00: status: { DRDY }
Mar 4 21:42:10 fritznas kernel: [ 6781.744087] ata9: hard resetting link
Mar 4 21:42:10 fritznas kernel: [ 6782.562033] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Mar 4 21:42:10 fritznas kernel: [ 6782.566025] ata12: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Mar 4 21:42:15 fritznas kernel: [ 6787.554403] ata9.00: qc timeout (cmd 0xec)
Mar 4 21:42:15 fritznas kernel: [ 6787.558393] ata12.00: qc timeout (cmd 0xec)
Mar 4 21:42:16 fritznas kernel: [ 6788.057636] ata12.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Mar 4 21:42:16 fritznas kernel: [ 6788.057646] ata12.00: revalidation failed (errno=-5)
Mar 4 21:42:16 fritznas kernel: [ 6788.057694] ata12: hard resetting link
Mar 4 21:42:16 fritznas kernel: [ 6788.057711] ata9.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Mar 4 21:42:16 fritznas kernel: [ 6788.057720] ata9.00: revalidation failed (errno=-5)
Mar 4 21:42:16 fritznas kernel: [ 6788.057764] ata9: hard resetting link
Mar 4 21:42:17 fritznas kernel: [ 6788.876390] ata12: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Mar 4 21:42:17 fritznas kernel: [ 6788.876434] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
Mar 4 21:42:27 fritznas kernel: [ 6798.861125] ata12.00: qc timeout (cmd 0xec)
Mar 4 21:42:27 fritznas kernel: [ 6798.861151] ata9.00: qc timeout (cmd 0xec)
Mar 4 21:42:27 fritznas kernel: [ 6799.364361] ata12.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Mar 4 21:42:27 fritznas kernel: [ 6799.364370] ata12.00: revalidation failed (errno=-5)
Mar 4 21:42:27 fritznas kernel: [ 6799.364416] ata12: limiting SATA link speed to 3.0 Gbps
Mar 4 21:42:27 fritznas kernel: [ 6799.364426] ata12: hard resetting link
Mar 4 21:42:27 fritznas kernel: [ 6799.364444] ata9.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Mar 4 21:42:27 fritznas kernel: [ 6799.364453] ata9.00: revalidation failed (errno=-5)
Mar 4 21:42:27 fritznas kernel: [ 6799.364499] ata9: limiting SATA link speed to 3.0 Gbps
Mar 4 21:42:27 fritznas kernel: [ 6799.364509] ata9: hard resetting link
Mar 4 21:42:28 fritznas kernel: [ 6800.183125] ata12: SATA link up 6.0 Gbps (SStatus 133 SControl 320)
Mar 4 21:42:28 fritznas kernel: [ 6800.187154] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 320)
Mar 4 21:42:34 fritznas kernel: [ 6805.726679] ata11: COMRESET failed (errno=-16)
Mar 4 21:42:34 fritznas kernel: [ 6805.726727] ata11: limiting SATA link speed to 3.0 Gbps
Mar 4 21:42:34 fritznas kernel: [ 6805.726734] ata11: hard resetting link
Mar 4 21:42:39 fritznas kernel: [ 6810.746992] ata11: COMRESET failed (errno=-16)
Mar 4 21:42:39 fritznas kernel: [ 6810.747040] ata11: reset failed, giving up
Mar 4 21:42:39 fritznas kernel: [ 6810.747079] ata11.00: disabled
Mar 4 21:42:39 fritznas kernel: [ 6810.747090] ata11.00: device reported invalid CHS sector 0
Mar 4 21:42:39 fritznas kernel: [ 6810.747111] ata11: EH complete
Mar 4 21:42:39 fritznas kernel: [ 6810.747165] sd 10:0:0:0: [sdh] Unhandled error code
Mar 4 21:42:39 fritznas kernel: [ 6810.747174] sd 10:0:0:0: [sdh] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
Mar 4 21:42:39 fritznas kernel: [ 6810.747183] sd 10:0:0:0: [sdh] CDB: Write(10): 2a 00 ae 86 bc 60 00 00 20 00
Mar 4 21:42:39 fritznas kernel: [ 6810.747204] end_request: I/O error, dev sdh, sector 2928065632
Mar 4 21:42:39 fritznas kernel: [ 6810.747333] sd 10:0:0:0: [sdh] Unhandled error code
Mar 4 21:42:39 fritznas kernel: [ 6810.747339] sd 10:0:0:0: [sdh] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
Mar 4 21:42:39 fritznas kernel: [ 6810.747347] sd 10:0:0:0: [sdh] CDB: Write(10): 2a 00 67 68 2c 00 00 04 00 00
Mar 4 21:42:39 fritznas kernel: [ 6810.747365] end_request: I/O error, dev sdh, sector 1734880256
Mar 4 21:42:39 fritznas kernel: [ 6810.747411] Buffer I/O error on device sdh1, logical block 216859776
Mar 4 21:42:39 fritznas kernel: [ 6810.763119] Buffer I/O error on device sdh1, logical block 216859903
Mar 4 21:42:39 fritznas kernel: [ 6810.763176] EXT4-fs warning (device sdh1): ext4_end_bio:250: I/O error -5 writing to inode 12 (offset 832406290432 size 524288 starting block 216860160)
Mar 4 21:42:39 fritznas kernel: [ 6810.763252] sd 10:0:0:0: [sdh] Unhandled error code
Mar 4 21:42:39 fritznas kernel: [ 6810.763258] sd 10:0:0:0: [sdh] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
Mar 4 21:42:39 fritznas kernel: [ 6810.763265] sd 10:0:0:0: [sdh] CDB: Write(10): 2a 00 67 68 30 00 00 04 00 00
Mar 4 21:42:39 fritznas kernel: [ 6810.763284] end_request: I/O error, dev sdh, sector 1734881280
Mar 4 21:42:39 fritznas kernel: [ 6810.763328] Buffer I/O error on device sdh1, logical block 216859904For me it's not looking like the HardDisk's are going to die. It looks more like the SATA connection crashes somehow under heavy load.
Are there any tips what to do ?