OMV 2 Kernel 4.x Image

  • Previously, I tried this method, but it didn't work for me: http://serverfault.com/questio…tected-hardware-unit-hang
    Then, I tried to disabled C1e state, using the kernel 4.5.3 , and update the nic driver, but error persist.
    Basically, OMV suppose to auto shutdown/wake up on daily basis according to cron job, but it freeze upon shutdown.
    Therefore, I have to manually shutdown every night.


    Update: I've tried the new kernel but no luck.
    I even using this parameters: ethtool -K eth0 gso off gro off tso off


    Not sure if this matter, but I notice that this does not happen frequently when I'm using HDD back then.
    Since I'm migrating OMV to SSD, this happens frequently.


    Thanks.

    OMV v5.0
    Asus Z97-A/3.1; i3-4370
    32GB RAM Corsair Vengeance Pro

    Edited 6 times, last by tinh_x7 ().

  • I notice that since I migrated from HDD to SSD, my cron shutdown isn't working anymore no matter which kernel I'm using.
    My eth0 is hanging upon auto shutdown.
    I notice that my swap is not present when I ran htop.
    I wonder if the swap is interfere with my auto shutdown.


  • You normally don't need the headers unless you are compiling a module against that kernel.

    omv 5.6.13 usul | 64 bit | 5.11 proxmox kernel | omvextrasorg 5.6.2 | kvm plugin 5.1.6
    omv-extras.org plugins source code and issue tracker - github


    Please read this before posting a question.
    Please don't PM for support... Too many PMs!

  • kernel image but it doesn't hurt to install the headers. I was just saying you don't have to install them if you aren't compiling a module against them.

    omv 5.6.13 usul | 64 bit | 5.11 proxmox kernel | omvextrasorg 5.6.2 | kvm plugin 5.1.6
    omv-extras.org plugins source code and issue tracker - github


    Please read this before posting a question.
    Please don't PM for support... Too many PMs!

  • HI,


    I sorted a little bit the Storage,


    now you will see a "Current" folder for the most actual kernel I build on this source tree.
    If you are intrested in older kernel Versions, you can find them in the "Old" folders.


    Current 4.6
    Current 4.5
    Current 4.4


    I suggest to always install the headers as you may need them to compile additional features like vBox driver ....

    ----------------------


    visit my blog here!
    OMV v2.2.x (kernel 4.5.X) | ASRock Q1900M | 32GB RAM | Sandisk SSD | Marvell PCIe SATA|Controler (88SE9230) | 4x3TB RAID5

  • I found a solution to my eth0 hanging during shutdown is to have TSO/GSO disabled permanently.
    In order for it to be persistent, is to create a script in /sbin/ifup-local.


    For those who have the same issue that I have, you can use my script.


    sudo chmod +x /sbin/ifup-local

    OMV v5.0
    Asus Z97-A/3.1; i3-4370
    32GB RAM Corsair Vengeance Pro

    Edited 10 times, last by tinh_x7 ().

  • Link down : https://miami.tschoerner.eu/ke…%2Bcustom%2Bfts_amd64.deb and https://miami.tschoerner.eu/ke…%2Bcustom%2Bfts_amd64.deb


    Could you create a tutorial or a guide how to compile kernel ?


    That will be great


    PS: @demetris do same for OMV3

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!