OMV 2 Kernel 4.x Image

Previously, I tried this method, but it didn't work for me: http://serverfault.com/questio…tected-hardware-unit-hang
Then, I tried to disabled C1e state, using the kernel 4.5.3 , and update the nic driver, but error persist.
Basically, OMV suppose to auto shutdown/wake up on daily basis according to cron job, but it freeze upon shutdown.
Therefore, I have to manually shutdown every night.

Update: I've tried the new kernel but no luck.
I even using this parameters: ethtool -K eth0 gso off gro off tso off

Not sure if this matter, but I notice that this does not happen frequently when I'm using HDD back then.
Since I'm migrating OMV to SSD, this happens frequently.

Thanks.

I notice that since I migrated from HDD to SSD, my cron shutdown isn't working anymore no matter which kernel I'm using.
My eth0 is hanging upon auto shutdown.
I notice that my swap is not present when I ran htop.
I wonder if the swap is interfere with my auto shutdown.

cat /etc/fstab
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>
# / was on /dev/sda1 during installation
UUID=dbe4c621-3b9e-4d2e-9af3-003837d19629 /               ext4 noatime,nodiratime,errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
# UUID=5fbde80b-57c6-4f7d-8b25-0ae9636bbdbe none            swap    sw              0       0
/dev/sdb1       /media/usb0     auto    rw,user,noauto  0       0
# >>> [openmediavault]
UUID=54bf67db-da31-4c50-bb3c-27140944b223 /media/54bf67db-da31-4c50-bb3c-27140944b223 ext4 defaults,nofail,user_xattr,noexec,usrjquota=aquota.user,grpjquota=aquota.group,jqfmt=vfsv0,acl 0 2
# <<< [openmediavault]

Hi Silverchair_mfcu,

Can you compile latest kernel with e1000 driver for me?
Thanks in advance.

No problem, thanks.
Btw, I finally resolved my NIC hanging upon shutdown.
I posted my solution from another thread.

I found the link for the latest Intel driver from here: https://downloadcenter.intel.c…nections-under-Linux-?v=t

Is that has the e1000 driver?
Thanks.

Awesome.

Zitat von Silverchair_mfcu

yes it has the modules in.

Hi,

what package we must install ? only images or image and headers ?

Thanks
Vincent

I'm using 4.6.
You need to install both image & headers for the kernel to work.

what image specifically from that link need to be installed?

OK Thanks

can you provide the full filename to be installed on that link please… its so many

I found a solution to my eth0 hanging during shutdown is to have TSO/GSO disabled permanently.
In order for it to be persistent, is to create a script in /sbin/ifup-local.

For those who have the same issue that I have, you can use my script.

 sudo chmod +x /sbin/ifup-local

#!/bin/bash
    echo "Turning off offloading on eth0..."
    /sbin/ethtool -K eth0 tso off;
    /sbin/ethtool -K eth0 gso off;
    echo $?;
    echo "Turning off offloading on eth1...";
    /sbin/ethtool -K eth1 tso off;
    /sbin/ethtool -K eth1 gso off;
    echo $?;
    echo "Turning off offloading on bond0...";
    /sbin/ethtool -K bond0 tso off;
    /sbin/ethtool -K bond0 gso off;
    echo $?;
    exit 0

Hi,

Can you compile a stable 4.6.3 ?

A tutorial guide would be nice.

Thanks in advance.

Link down : https://miami.tschoerner.eu/ke…%2Bcustom%2Bfts_amd64.deb and https://miami.tschoerner.eu/ke…%2Bcustom%2Bfts_amd64.deb

Could you create a tutorial or a guide how to compile kernel ?

That will be great

PS: @demetris do same for OMV3