Raid 1 - Drive failed - Replaced - Status Clean, Degraded

  • One of my drives was showing read errors, so I pulled it and replaced it with an identical 3tb HGST.


    Re-sync (5hrs) went fine as far as i can tell.


    The array reports as "Clean, but "Degraded" in OMV.


    How can I remove this flag?






    Code
    root@NobKitten:~# blkid
    /dev/sdb: UUID="962c0810-0000-1583-d1b8-e4e0481e7a1d" UUID_SUB="fba9b6bc-0824-c8d4-61cf-b7738bb9767b" LABEL="NobKitten:M2" TYPE="linux_raid_member"
    /dev/sdc: UUID="3fac3cb1-281b-bae1-5c88-23b820c6e73b" UUID_SUB="9dba2023-d531-4f26-bb82-59855f9cb15e" LABEL="NobKitten:M1" TYPE="linux_raid_member"
    /dev/sdd: UUID="3fac3cb1-281b-bae1-5c88-23b820c6e73b" UUID_SUB="2f910984-6d7d-1434-4ad2-5721f854c6cc" LABEL="NobKitten:M1" TYPE="linux_raid_member"
    /dev/sde1: UUID="59448263-0293-45d9-bb96-9390a189728c" TYPE="ext4"
    /dev/sde5: UUID="3bf1317d-3952-47fe-8854-7b0e00cbda40" TYPE="swap"
    /dev/md127: LABEL="M2" UUID="f539bc29-030c-4bdf-ac3e-2fd81569c5d5" TYPE="ext4"
    /dev/md126: LABEL="M1" UUID="ad965792-7ecb-484b-8718-c54b9ec74790" TYPE="ext4"
    /dev/sda: UUID="962c0810-0000-1583-d1b8-e4e0481e7a1d" UUID_SUB="104d783d-be32-a0e2-06b6-3586fbbf17ef" LABEL="NobKitten:M2" TYPE="linux_raid_member"
    root@NobKitten:~#


    If you could just go ahead and make a plugin for it, that'd be great.
    N54L/4GB/12TB

  • After a bit of hunting about, I'm giving this a try.


    If you could just go ahead and make a plugin for it, that'd be great.
    N54L/4GB/12TB

  • Re-sync'd, still reporting as "Degraded"


    If you could just go ahead and make a plugin for it, that'd be great.
    N54L/4GB/12TB

  • Righto.


    Pulled drive 1 from the array, carried out a low level format on it and it passed with no errors.
    Copied over the data from drive 2 to drive 1.
    Destroyed the array and pulled drive 2 from the server.
    Carried out a low level format on it and it passed with no errors.



    I have put both drive 1 and drive 2 back in the server.
    Created a new array using drive 1 and drive 2, but specified that drive 1 is missing.
    Drive 1 is currently rsyncing to drive 2
    Once this is complete i will add drive1 to the raid array.
    This will rebuild the array using the data on drive2.


    Hopefully there will not be any errors thrown up in my face.



    The replacement 3tb that I received turns out to have a terribad sector slap bang in the middle thus rendering it un-usable.

    If you could just go ahead and make a plugin for it, that'd be great.
    N54L/4GB/12TB

    Einmal editiert, zuletzt von CaNsA ()

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!