Suddenly Webinterface and connectivity broken

  • Hy guys!
    I hope you can help me.


    At first my system:
    -Motherboard: Asus C60M1-I with AMD A50M
    -RAM: 8GB G.Skill Ripjaws DDR3-1066 Dual Channel
    -System Storage: USB 8 GB SanDisk Cruzer Fit
    -Data Storage: 4x 2TB RAID5


    I have a really nerving problem with OMV.


    All has start, that i would copy my complete data (after i had build this nas) to the nas over 1GB LAN.
    While this copying, sometimes the nas has interrupt it. Then i must start the copy again. Datapiece for Datapiece.
    But then i couldnt start it again.
    The NAS System (OMV) had a bug.
    No acces to the server with LAN and the Webinterface was broken, too.
    The webinterface comes up all right now. But wehn i give the login username and password,then the explorer flashes shortly white. But then it resets ans i come to the loginwindows again.


    After this problem i have reinstall OpenMediaVault on the USB Storage again.
    Now it was running, again.


    After i had configue all new, I have shut down the server and have make a ImageFile from the USB System Storage.I thought i can get a backup from a running OMV.


    But then, again!
    There was no change on the USB Stick and after ShutDown it was running so beautifull.
    I have Start the System after the Bachup of the USB Sick and the Webisterface and the connectivity is broken, again!


    I cant understand. I hope somebody can help me. Many Thanks people!

  • Hy people!


    I have copy my data to the NAS again...
    And the connection interrupts again.
    Its just when i copy very much data a long time.
    The NAS is then no more in the network.


    But in this case with OMV on HDD i can Restart the system successful.
    Not so nice, but O.K.
    Iam happy enough when i can restart.


    But anyway, when somebody somehink know, then please let me know!


    A other Question yet:
    My HDD LED on my serverfront is all the time in stress.
    Some HDD is working... all time!
    My CPU is on 80-95%


    What is this?
    Its not the Antivir-Plugin. I have disable it.



    By, Ruby

  • When you create a RAID volume, you have to wait the volume to be synced.
    I took almost 13 hours to sync my 7x3Tb RAID5 volume.
    When it's ready and clean, you then create the filesystem.

  • Hy! Thanks for answer!


    Yes, i know what you say.
    The thing is, that the RAID was synced already.
    ... and now it is syncing again.


    Possible becaus e the restart. That OMV repairs a error in the RAID texture?...


    Today it is ready. Over night the resync was done
    CPU is in idle, too!


    I hope this silly connection interrupts comes never...


    By! Ruby

  • Hy!


    I would start the copy again.
    After one minute the connection fails again.


    One minute with 27-33MB/s


    Windows has this diconnect sign of the network device, too!
    Just very short, disconnected.
    When i start the copy again, the Storage is back again.


    I have try limit the bandwidth to 20MB/s.
    But this hastn fix the problem.


    I have open the Webinterface of OMV while i have copy.
    After some seconds(!) the failure aigain.
    The Webinterface has give me a message:
    (in backround you can see the RAID status ...)


    http://s14.directupload.net/file/d/2985/8ai4gtii_jpg.htm


    Whats going on here. Not nice!...


    I hope anybody can help me!
    Till later!

  • Hi ruby90. I've been into the same problem the last 2 days, and it looks like I've found the problem. I added 2 more drives to my RAID5 array this week (growing from 4x 3To to 6x 3To). I didn't had enough SATA ports available so I also added and addon card I had (JMB363 controller). After the growing/expansion operation, I started to move datas to the array and ran into the same problem (copy stopped, webinterface unavailable, etc...). At every restart, the array started a new resync. after 3 resync and multitesting the 2 new hard drives to check if one of them wasn't DOA, I decided to replace the addon controller card by another one (based on SIL3132 chipset) and also the SATA cables. That definately solved my problem, so maybe you have a defective SATA cable or controller. Hope this can be helpful for you.


    Interesting fact to notice :


    - rebuild speed with the JMB363 chipset : around 25000Mb/s
    - rebuild speed with the SIL3132 chipset : around 60000Mb/s


  • I need to ask you to make one thread per issue, and wait for answers unless you found a solution to your problem to share with others. This will make the forums easier to read for everyone else that may experience the same issues you have.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!