hi guys, i want share an old canon printer lbp-1120. I installed cups plugin, i added the printer with the right driver but it doesn't want work. It say the message:
/usr/lib/cups/filter/pstocapt not available
Can you help me? thanks
hi guys, i want share an old canon printer lbp-1120. I installed cups plugin, i added the printer with the right driver but it doesn't want work. It say the message:
/usr/lib/cups/filter/pstocapt not available
Can you help me? thanks
Check this out - http://askubuntu.com/questions…to-run-under-ubuntu-14-04
thank you for the answer...i tried to add the printer using ssh and the command
sudo /usr/sbin/lpadmin -p LBP1120 -m CNCUPSLBP1120CAPTK.ppd -v ccp://localhost:59787 -E
but now i have an other error : lpadmin: Bad device-uri scheme "ccp"
Sorry, I rarely use a printer let alone cups.
What driver did you use?
This is the driver for your device:
http://www.canon.co.uk/support…ux%20(64-bit)&language=EN
You'll find a complete install guide inside the tar file (under the doc folder)
thank you i will try....but this drivers work with i386 processors and i'm using a raspberry pi that has an arm processor....is it possible use them?
thank you i will try....but this drivers work with i386 processors and i'm using a raspberry pi that has an arm processor....is it possible use them?
i cant' belive but now the printer works fine...after a lot of attempts i found a good solution...i share my solution:
1) install cups and other packages:
sudo apt-get install cups
sudo apt-get install build-essential
2) download the driver from this link http://www.boichat.ch/nicolas/capt/capt-0.1.tar.gz and extract it on the path /usr/src/
3) install the driver:
sudo usermod -a -G lpadmin accountName (usually admin)
cd /usr/src/capt-0.1
make
make install
modprobe usblp
chmod a+rw /dev/usb/lp0
/etc/init.d/cups restart
4) Go to "yourIP":631 and add the print using the driver lbp-810 (it works fine)..VERY IMPORTANT: when you add the print rem
to go to miscellanous and set alwaysReset
5)Change DeviceURI usb://Canon/LASER%20SHOT%20LBP-1120?serial=0158030E with DeviceURI serial:/dev/null on /etc/cups/printers.conf:
sudo nano /etc/cups/printers.conf -> make the change
/etc/init.d/cups restart
end
I recommend to control the printer with google cloud print (to add the printer you can use cloudprint-service)
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!