Error #0

IamTed · 1. März 2018

So, last weekend, I bit the bullet and upgraded from OMV 0.5 to 4.0.19. I did the tried, tested and true method of pulling all of my data drives, replacing my system drive with an old spare 40gb hdd. Everything seemed to go smoothly. After the install, I put back in my data drives and started to set OMV up.

One of those data drives was an unused 2Tb drive that wasn’t part of my RAID array. I formatted it and left it. Yesterday, I copied a bunch of stuff to it, without a problem. Today, I went to create a Shared Folder on the drive and got the following error:

Code

Error #0:
OMV\ExecException: Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C; omv-mkconf systemd 2>&1' with exit code '1': Traceback (most recent call last):
  File "/usr/sbin/omv-mkconf", line 24, in <module>
    import openmediavault
  File "/usr/lib/python3/dist-packages/openmediavault/__init__.py", line 24, in <module>
    import openmediavault.settings
  File "/usr/lib/python3/dist-packages/openmediavault/settings.py", line 101, in <module>
    Environment.load()
  File "/usr/lib/python3/dist-packages/openmediavault/settings.py", line 39, in load
    for line in reader.readlines():
  File "/usr/lib/python3.5/encodings/ascii.py", line 26, in decode
    return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in position 2630: ordinal not in range(128) in /usr/share/php/openmediavault/system/process.inc:175
Stack trace:
#0 /usr/share/openmediavault/engined/module/systemd.inc(36): OMV\System\Process->execute()
#1 /usr/share/openmediavault/engined/rpc/config.inc(168): OMVModuleSystemd->applyConfig()
#2 [internal function]: OMVRpcServiceConfig->applyChanges(Array, Array)
#3 /usr/share/php/openmediavault/rpc/serviceabstract.inc(123): call_user_func_array(Array, Array)
#4 /usr/share/php/openmediavault/rpc/serviceabstract.inc(150): OMV\Rpc\ServiceAbstract->callMethod('applyChanges', Array, Array)
#5 /usr/share/php/openmediavault/rpc/serviceabstract.inc(528): OMV\Rpc\ServiceAbstract->OMV\Rpc\{closure}('/tmp/bgstatusEp...', '/tmp/bgoutput1i...')
#6 /usr/share/php/openmediavault/rpc/serviceabstract.inc(151): OMV\Rpc\ServiceAbstract->execBgProc(Object(Closure))
#7 /usr/share/openmediavault/engined/rpc/config.inc(213): OMV\Rpc\ServiceAbstract->callMethodBg('applyChanges', Array, Array)
#8 [internal function]: OMVRpcServiceConfig->applyChangesBg(Array, Array)
#9 /usr/share/php/openmediavault/rpc/serviceabstract.inc(123): call_user_func_array(Array, Array)
#10 /usr/share/php/openmediavault/rpc/rpc.inc(86): OMV\Rpc\ServiceAbstract->callMethod('applyChangesBg', Array, Array)
#11 /usr/sbin/omv-engined(536): OMV\Rpc\Rpc::call('Config', 'applyChangesBg', Array, Array, 1)
#12 {main}

Alles anzeigen

Now, no matter what I try to do, I get an Error #0. I’m not sure if the rest of the info under the Error #0 is the same, as there is a lot of it. I have been careful to only make changes to the system through the web GUI, with the exception of adding the entry into the /etc/default/openmediavault file to stop the system from complaining about the drives being over 85% full.

I’m not sure what to do now. Here is my syslog file.
Thanks!
Ted

http:// https://www.dropbox.com/s/2h00hl9d0satk9m/syslog.txt?dl=0

Sent from my iPad using Tapatalk

Jetzt mitmachen!