Not all disks (volumes) appear in SNMP monitoring

  • I have two RAID volumes on my OMV box, but neither of them appear in Observium which I use to monitor OMV and other servers using SNMP.


    I can only see SNMP info about the OS disk. The snmpd.conf on my OMV box is empty aside from owner information - do I need to add anything here?


    These are the volumes I can see info for:


    /
    /etc/machine-id
    /tmp


    How can I get my RAID volumes to show up? Thanks for any help!

  • Try snmpwalk -v2c -c public 10.0.83.1 change public to your comunity name and ip to your omv name or ip. Should stream a lot of text. Look for other disks.


    Can't remember if I had to install any other packages.
    dpkg -l |grep snmp


    ii libsnmp-base 5.7.3+dfsg-1.7+deb9u1 all SNMP configuration script, MIBs and documentation


    ii libsnmp30:amd64 5.7.3+dfsg-1.7+deb9u1 amd64 SNMP (Simple Network Management Protocol) library


    ii openmediavault-snmp 4.0.4-1 all OpenMediaVault SNMP (Simple Network Management Protocol) plugin


    ii snmpd 5.7.3+dfsg-1.7+deb9u1 amd64 SNMP (Simple Network Management Protocol) agents


    I used to use observium but switched to a fork called librenms. Here is what I see.


    Here is what is in my snmpd.conf.

  • I have the same problem.
    I have mounted 3 disks in omv but only one of them shows in the snmp data. I think this has something to do with the fact that these two disks are NTFS and the one showing is ext4.
    At first i thought it has something to do with permissions because the mounted folders were showing as owner root with group root and the disk that is showing was root:users. So i added gid=100 in fstab for these two disks and rebooted and the folders now mounted with root:users too, but the disks are still not showing in snmt.
    Can someone help me to find the problem?
    Thank you


    PS: OMV is on a Raspberry Pi 4 with 4GB ram
    Edit: Forgot to write - OMV is version 5.2.1-1

  • Any news ?
    I have also a Raspberry Pi 4 with 4GB ram and my OMV is 5.2.7-1. where do yuo look for snmp data ? I'm using Nagios.
    regards

  • My use case is that i want to display some disk info(mainly percent used and smart status - if i find the oid for that one :) ) in home assistant. I am using snmpwalk to discover the oids i need to use in home assistant. But my two mounted ntfs drives are missing from the info.
    However i have made some progress. If i add the drives directly in snmpd.conf as disk <path> then i can retrieve their info.
    However that will probably be overwritten at some point(i am guessing if i mount a new drive in OMV interface), so i need to find a way to permanently add these entries there

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!