Cannot see file system after 2x to 4x upgrade! Disk is detected.

  • I built another OMV box with with 4.1.13-1 (old box was 2x stoneburner). The 2x raid 5 array transferred to 4x fine but I have another 3tb drive from the 2x box (not in the raid array) that is detected but does not show up in the file systems. I DO NOT want to have to format the 3tb drive unless necessary. Is there problem with drives or file systems when moving to OMV 4x?


    • sysinfo.JPG

      (34.18 kB, downloaded 184 times, last: )
    • Disks.JPG

      (35.04 kB, downloaded 153 times, last: )
    • Raid mgmt.JPG

      (23.66 kB, downloaded 150 times, last: )
    • File Sys.JPG

      (33.74 kB, downloaded 144 times, last: )
  • Is there problem with drives or file systems when moving to OMV 4x?

    I have seen issues where a previous zfs signature on the drive or array causes this issue.

    omv 5.6.4 usul | 64 bit | 5.11 proxmox kernel | omvextrasorg 5.6 plugins source code and issue tracker - github

    Please read this before posting a question.
    Please don't PM for support... Too many PMs!

  • I did forget to unmount the drives from the OMV 2xx before moving them to the OMV 4xx box,. I hope this is not a fatal mistake for the raid 5 array? It seems to have mounted in the OMV 4xx box fine. But OMV 4xx will not let me mount the single drive file system without formatting the drive first. Can I put the drive back in the OMV 2xx box mount it then unmount it before movint into the 4xx box?

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!