I am having an odd problem that in itself is not really serious but more annoying.
I am using DD-WRT on my router and running OMV on a GEN8 Microserver and installing though ILO.
If I let OMV use DHCP it installs and works perfectly albeit the command line login does not show the IP address but if I login and use "ip address" it shows my IP correctly and if I try to access the WEBgui on that IP it also works perfectly.
If however, I grab the port mac and set it as a static IP in DD-WRT I start having problems...
I do have other devices setup this way in DD-WRT that all work fine.
At the OMV command line, "ip address" shows my static IP correctly but the WEBgui will not load, connection timed out.
If I then run omv-firstaid to reconfigure the network it either sits there indefinately saving after choosing all the options or fails with a MONIT error on port 2812.
I have tried a reinstall of omv with the mac already set in DD-WRT but it does the same thing everytime.
I am trying to use 192.168.1.10, nothing else is using this IP address.
If I remove the static assignment in DD-WRT and leave omv to use DHCP it works fine but on some other random 192.168.1.x IP
The range is set in DD-WRT for x.x.x.2 for up too 100 clients, I have also tried setting the range in DD-WRT to something starting above x.x.x.10 but that does not work either.
Any ideas?
Regards