Easy Nextcloud Installation discussion

  • Well mine was working also perfect now got this and I cannot open the log

    Code
    Internal Server Error
    The server encountered an internal error and was unable to complete your request.
    Please contact the server administrator if this error reappears multiple times, please include the technical details below in your report.
    More details can be found in the server log.


    I also receive this error log too.


    If you look in the containers, it says that the app cannot verify the server identity or something similar and is quietly shutting down. i will upload the log later today if i find some time

  • Well mine was working also perfect now got this and I cannot open the log

    Code
    Internal Server Error
    The server encountered an internal error and was unable to complete your request.
    Please contact the server administrator if this error reappears multiple times, please include the technical details below in your report.
    More details can be found in the server log.

    Further to the above post, this is the following error log that results in what Nefertiti wrote:



    Can anyone help?

  • I deleted everything and started from scratch. Got everything working ok just following Techno dad life's video, good stuff!


    However I have one question regarding Nextcloudpi. I see in the settings menu that Preview generator is automatically active. Does that mean that I don't have to setup a cron job as I did before? Do the generator in Nextcloudpi automatically also cover external storage?

  • Hi all,


    I am trying to install nextcloudpi on my server but am having some issues

    I am running mergefs and snapraid and wish to install the package on the merged desk


    when i run lsblk, i dont see my merged partition

    When i normally run dockers i point it to "/srv/78d3c681-3fb5-46c8-9900-dd43b82465ae/somedirectory " but this doesnt exist in the list


    Have i setup snapraid/mergefs wrong?


    FYi this is the output of lsblk


    NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT

    sda 8:0 0 3.7T 0 disk

    └─sda1 8:1 0 3.7T 0 part /srv/dev-disk-by-label-Red2

    sdb 8:16 0 223.6G 0 disk

    ├─sdb1 8:17 0 512M 0 part /boot/efi

    ├─sdb2 8:18 0 215.2G 0 part /

    └─sdb3 8:19 0 7.9G 0 part [SWAP]

    sdc 8:32 0 3.7T 0 disk

    └─sdc1 8:33 0 3.7T 0 part /srv/dev-disk-by-label-Redpro1

    sdd 8:48 0 465.8G 0 disk

    └─sdd1 8:49 0 465.8G 0 part /srv/dev-disk-by-label-Crucial

    sde 8:64 0 3.7T 0 disk

    └─sde1 8:65 0 3.7T 0 part /srv/dev-disk-by-label-Redpro2cool

    sdf 8:80 0 3.7T 0 disk

    └─sdf1 8:81 0 3.7T 0 part /srv/dev-disk-by-label-Red1


    Thanks,

    Darrell

  • Hi TechnoDadLife


    I'm fan of your Channel, I' learning a lot there, but in this vídeo I can't finish


    O followed your vídeo third time

    and after install Docker and Portainer I Lost access the Gui interface of OMV.

    The fisrt time and only lost the interface when I installed nextcloudpi

    And nextcloud show that is inicialize but never inicialize.

    Só I reinstall using noobs in raspberry to try again, again..

    What I'm doing wrong?

  • I reinstall


    Now a new error


    Init done

    stopping Cron...

    stopping Redis...

    stopping Postfix...

    stopping logs...

    tail: no process found

    Stopping apache

    Stopping PHP-fpm

    Stopping mariaDB

    LAMP cleanup complete

    Starting PHP-fpm

    Starting Apache

    Starting mariaDB

    2020-09-21 8:44:11 0 [Note] mysqld (mysqld 10.3.23-MariaDB-0+deb10u1) starting as process 93 ...

    Starting Redis

    Starting Cron

    Starting Postfix

    Nextcloud is not installed - only a limited number of commands are available



    There are no commands defined in the "config:system" namespace.



    NextCloudPi not yet initialized, trying again in a few seconds ...

  • Under what system user is nextcloudpi docker running?

    Can the user be changed? There is no info on the ownyourbits page about that.


    I cannot access part of my files from within nextcloud. Should be a permission issue.

  • Well I am using the "external storage" function in Nextcloud. In fact it is a folder on local storage, so i do select "local" in the "external storage".


    ...sounds really weird ;) but that is nextcloud terminology

  • It's really strange.

    The folder structure i would like to access is 770 in general (/JulyPaddy).

    ACL includes the group "users" and user "www-data" as well as group "www-data" with read/write access. to /JulyPaddy

    user www-data is in groups "users" as well as the group "julypaddy"

    "julypaddy" also has priviledges for the shared folder (/JulyPaddy).


    Adding the share in "external storage" works with a green light but it is empty in nextcloud.

  • The directory is shown as empty in Nextcloud.

    When I log in as www-data on the console with:


    Code
    sudo -u www-data bash

    I can enter the directory and get the directoriy listing.


    Doing a file scan in admin interface says:


    Code
    Exception during scan: opendir(/JulyPaddy/): failed to open dir: Permission denied
    #0 [internal function]: OCA\Files\Command\Scan->exceptionErrorHandler(2, 'opendir(/JulyPa...', '/data/nextcloud...', 131, Array)


    Seems like www-data user is not the same as the docker www-data user even if the UID is identical??


    When logging into the container console the owner of the directory is different that on the host system.

    The owner is here ncp and not my system user. Maybe ACLs and permissions are also not reflected correclty to the docker?

    Edited once, last by monsen: adding more ().

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!