Create filesystem error communication failure

  • I found at my computing stuff a WD 1TB Green Caviar HDD and tried it without the external power supply, similar like before with the 3TB WD Red HDD


    Got the same errors as before , but it took a little longer before the system crashed





  • here is the log:



  • ATA controller:

  • As a layman myself, I see some "errors" with the dmesg command:



    Code
    [ 1.845571] phy phy-ff770000.syscon:usb2-phy@e460.1: Failed to get VBUS supply regulator



  • Code
    [ 3.135818] rockchip-spi ff1d0000.spi: no high_speed pinctrl state





    Code
    [ 3.946085] i2c i2c-10: of_i2c: modalias failure on /dp@fec00000/ports
    [ 3.947872] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2




    Code
    [ 4.132784] xhci-hcd xhci-hcd.9.auto: Host not halted after 16000 microseconds.
    [ 4.137214] xhci-hcd xhci-hcd.9.auto: Host controller not halted, aborting reset.




    Code
    [ 4.951028] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2



    Code
    [ 14.382190] ff100000.saradc supply vref not found, using dummy regulator
    [ 14.382297] rockchip-saradc ff100000.saradc: failed to get voltage
    [ 14.386073] rockchip-saradc: probe of ff100000.saradc failed with error -22



    Code
    [ 14.694857] FAT-fs (mmcblk0p6): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
    [ 14.706800] [BT_RFKILL]: DISABLE UART_RTS
    [ 14.706867] [BT_RFKILL]: bt turn on power
    [ 14.712323] FAT-fs (mmcblk0p6): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.



    Questions:

    • I see many driver failures in de dmesg?
    • Is this an incompatibility between the WD RED firmware and either the SATA Chipset and/or the mainboard it's self?
    • How to be fixed?

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!