[RESOLED] Owncloud Plugin made it in 0.5.25

NAST · 24. November 2013

=====================================================================================================
Latest Update:
As of Nikolaus Day (2013/12/6) - I did upgrade to OMV 0.5.25 including the latest updates.
Ownclould could be activated and seem to run ok!
=====================================================================================================

=====================================================================================================
Update: It should not have made it to the repository as Volker seem to be working on it. So for now STAY away from it!
But it might not show up in your list anyway b/c it got pulled
It is not ready yet - but Volker is working on it!
=====================================================================================================
For now it killed my machine after I tried to remove the plugin and a reboot - be careful
=====================================================================================================
Hi there,

I happen to update my system as of just a few minutes back (N40L x64 64bit system)...and I found a owncloud plugin saying it is based on version 0.5.13.
Enabling went fine -- but it did not show up ... really.

But when I rebooted the system - it came up quite happily and I found a new 'owncloud' option under the services tab.
Enabling it there did not go that well:

Code

Error #4000: exception 'OMVException' with message 'Failed to execute command 'export LANG=C; invoke-rc.d 'apache2' graceful 2>&1': Syntax error on line 7 of /etc/apache2/openmediavault-webgui.d/owncloud.conf: Wrapper /var/www/owncloud/php-fcgi cannot be accessed: (2)No such file or directory Action 'configtest' failed. The Apache error log may have more information. failed! invoke-rc.d: initscript apache2, action "graceful" failed.' in /usr/share/php/openmediavault/initscript.inc:169 Stack trace: #0 /usr/share/openmediavault/engined/module/apache.inc(59): OMVSysVInitScript->invoke('graceful') #1 /usr/share/openmediavault/engined/rpc/config.inc(198): OMVModuleApache->startService() #2 [internal function]: OMVRpcServiceConfig->applyChanges(Array, Array) #3 /usr/share/php/openmediavault/rpcservice.inc(125): call_user_func_array(Array, Array) #4 /usr/share/openmediavault/engined/rpc/config.inc(247): OMVRpcServiceAbstract->callMethod('applyChanges', Array, Array) #5 [internal function]: OMVRpcServiceConfig->applyChangesBg(Array, Array) #6 /usr/share/php/openmediavault/rpcservice.inc(125): call_user_func_array(Array, Array) #7 /usr/share/php/openmediavault/rpc.inc(62): OMVRpcServiceAbstract->callMethod('applyChangesBg', Array, Array) #8 /usr/sbin/omv-engined(495): OMVRpc::exec('Config', 'applyChangesBg', Array, Array, 1) #9 {main}

So when I hid enable and then hit apply - the above happens

So it is some broken?
I hope it did break any other things...

NAST

Supportinfo:

Code

Basic Info:


Script started: 131124-170946


Script Version: 0.2.0
Debian-Version: 6.0.8
OMV-Version: 0.5.23


System Drive: (can vary at every boot)
/dev/sdb1


smartctl -i /dev/sdb1
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net


Device:                           Version: 0.00
>> Terminate command early due to bad response to IEC mode page
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.


cat /etc/default/locale
#  File generated by update-locale
LANG="en_US.UTF-8"
##########################
01-sources:


cat /etc/apt/sources.list
--------------------------
#


# deb cdrom:[Debian GNU/Linux 6.0.0 _Squeeze_ - Official Snapshot amd64 LIVE/INSTALL Binary 20130824-13:07]/ squeeze main non-free


#deb cdrom:[Debian GNU/Linux 6.0.0 _Squeeze_ - Official Snapshot amd64 LIVE/INSTALL Binary 20130824-13:07]/ squeeze main non-free


deb http://ftp2.de.debian.org/debian/ squeeze main
deb-src http://ftp2.de.debian.org/debian/ squeeze main


deb http://security.debian.org/ squeeze/updates main non-free
deb-src http://security.debian.org/ squeeze/updates main non-free


# squeeze-updates, previously known as 'volatile'
deb http://ftp2.de.debian.org/debian/ squeeze-updates main non-free
deb-src http://ftp2.de.debian.org/debian/ squeeze-updates main non-free
--------------------------


ls -la /etc/apt/sources.list.d/
--------------------------
total 24
drwxr-xr-x 2 root root 4096 Nov 24 16:21 .
drwxr-xr-x 6 root root 4096 Nov  7 23:44 ..
-rw-r--r-- 1 root root   58 Nov  7 23:44 omv-extras-org-sardaukar.list
-rwxr-xr-x 1 root root  679 Aug 24 12:56 openmediavault.list
-rw-r--r-- 1 root root   45 Nov  2  2011 openmediavault-local.list
-rw-r--r-- 1 root root  139 Nov  7 23:44 virtualbox.list
--------------------------


cat /etc/apt/sources.list.d/openmediavault.list
--------------------------
deb http://packages.openmediavault.org/public sardaukar main
# deb http://downloads.sourceforge.net/project/openmediavault/packages sardaukar main


## Uncomment the following line to add software from the proposed repository.
# deb http://packages.openmediavault.org/public sardaukar-proposed main
# deb http://downloads.sourceforge.net/project/openmediavault/packages sardaukar-proposed main


## This software is not part of OpenMediaVault, but is offered by third-party
## developers as a service to OpenMediaVault users.
# deb http://packages.openmediavault.org/public sardaukar partner
# deb http://downloads.sourceforge.net/project/openmediavault/packages sardaukar partner
--------------------------
##########################
02-packages:


dpkg -l | grep openmediavault
--------------------------
ii  openmediavault                      0.5.23                       Open network attached storage solution
pc  openmediavault-autoshutdown         0.5.6                        OpenMediaVault AutoShutdown Plugin
ii  openmediavault-clamav               0.5.6                        OpenMediaVault ClamAV plugin
ii  openmediavault-extplorer            0.5.2                        OpenMediaVault eXtplorer plugin
ii  openmediavault-keyring              0.2                          GnuPG archive keys of the OpenMediaVault archive
ii  openmediavault-links                0.5.7                        OpenMediaVault links plugin
ii  openmediavault-minidlna             0.5.8                        OpenMediaVault miniDLNA (DLNA server) plugin
ii  openmediavault-omvextrasorg         0.5.15                       OMV-Extras.org Package Repositories for OpenMediaVault
ii  openmediavault-owncloud             0.5.1                        OpenMediaVault ownCloud plugin
ii  openmediavault-processlist          0.5.5                        OpenMediaVault process list panel
ii  openmediavault-rsnapshot            0.5.2                        OpenMediaVault rsnapshot backup plugin.
ii  openmediavault-supportinfo          0.5.5                        OpenMediaVault support panel
ii  openmediavault-usbbackup            0.5.8                        OpenMediaVault USB backup plugin
##########################
03-filesystem:


fdisk -l
--------------------------


WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.




Disk /dev/sda: XXX GB, XXXXX bytes
255 heads, 63 sectors/track, XXXX cylinders
Units = cylinders of XXXX * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000


   Device Boot      Start         End      Blocks   Id  System
/dev/sda1               1       30402   244198583+  ee  GPT


Disk /dev/sdb: 4043 MB, 4043309056 bytes
125 heads, 62 sectors/track, 1018 cylinders
Units = cylinders of 7750 * 512 = 3968000 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000d58f8


   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1   *           1         964     3732480   83  Linux
Partition 1 has different physical/logical beginnings (non-Linux?):
     phys=(0, 32, 33) logical=(0, 33, 3)
Partition 1 has different physical/logical endings:
     phys=(464, 203, 59) logical=(963, 60, 38)
Partition 1 does not end on cylinder boundary.
/dev/sdb2             964        1019      212993    5  Extended
Partition 2 has different physical/logical beginnings (non-Linux?):
     phys=(464, 236, 27) logical=(963, 93, 39)
Partition 2 has different physical/logical endings:
     phys=(491, 113, 6) logical=(1018, 89, 22)
Partition 2 does not end on cylinder boundary.
/dev/sdb5             964        1019      212992   82  Linux swap / Solaris


df -h
--------------------------
Filesystem            Size  Used Avail Use% Mounted on
/dev/sdb1             3.6G  950M  2.4G  28% /
tmpfs                1007M     0 1007M   0% /lib/init/rw
udev                 1001M  148K 1001M   1% /dev
tmpfs                1007M     0 1007M   0% /dev/shm
tmpfs                1007M   32K 1007M   1% /tmp
/dev/sda1             230G  201G   17G  93% /media/e8298cfa-9ccf 
##########################
04-raid:


cat /proc/mdstat
--------------------------
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
unused devices: <none>


cat /etc/mdadm/mdadm.conf
--------------------------
# mdadm.conf
#
# Please refer to mdadm.conf(5) for information about this file.
#


# by default, scan all partitions (/proc/partitions) for MD superblocks.
# alternatively, specify devices to scan, using wildcards if desired.
# Note, if no DEVICE line is present, then "DEVICE partitions" is assumed.
# To avoid the auto-assembly of RAID devices a pattern that CAN'T match is
# used if no RAID devices are configured.
DEVICE partitions


# auto-create devices with Debian standard permissions
CREATE owner=root group=disk mode=0660 auto=yes


# automatically tag new arrays as belonging to the local system
HOMEHOST <system>


# definitions of existing MD arrays


mdadm --examine --scan
--------------------------


##########################
06-samba:


testparm -s -> checks smb.conf
--------------------------
Load smb config files from /etc/samba/smb.conf
rlimit_max: rlimit_max (1024) below minimum Windows limit (16384)
Loaded services file OK.
Server role: ROLE_STANDALONE
[global]
	server string = %h server
	obey pam restrictions = Yes
	pam password change = Yes
	passwd program = /usr/bin/passwd %u
	passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
	syslog = 0
	syslog only = Yes
	log file = /var/log/samba/log.%m
	max log size = 1000
	socket options = TCP_NODELAY IPTOS_LOWDELAY
	load printers = No
	printcap name = /dev/null
	disable spoolss = Yes
	dns proxy = No
	panic action = /usr/share/samba/panic-action %d
	create mask = 0777
	directory mask = 0777
	aio read size = 16384
	aio write size = 16384
	use sendfile = Yes
	printing = bsd
	print command = lpr -r -P'%p' %s
	lpq command = lpq -P'%p'
	lprm command = lprm -P'%p' %j
--------------------------


smbstatus
--------------------------


Samba version 3.5.6
PID     Username      Group         Machine
-------------------------------------------------------------------


Service      pid     machine       Connected at
-------------------------------------------------------


No locked files


--------------------------


##########################
99-other:


cat /etc/apache2/ports.conf
--------------------------
NameVirtualHost *:80
Listen 80




groups openmediavault
--------------------------
openmediavault : openmediavault

Alles anzeigen

NAST · 24. November 2013

The system remain in the state of wanting me to apply the configuration - which not work - it does not matter, if I enable the owncloud plugin or not.

Even the removal/purging of the plugin does not change this - every 'apply action' results in:

Code

Error #4000: exception 'OMVException' with message 'Failed to execute command 'export LANG=C; invoke-rc.d 'apache2' graceful 2>&1': Syntax error on line 7 of /etc/apache2/openmediavault-webgui.d/owncloud.conf: Wrapper /var/www/owncloud/php-fcgi cannot be accessed: (2)No such file or directory Action 'configtest' failed. The Apache error log may have more information. failed! invoke-rc.d: initscript apache2, action "graceful" failed.' in /usr/share/php/openmediavault/initscript.inc:169 Stack trace: #0 /usr/share/openmediavault/engined/module/apache.inc(59): OMVSysVInitScript->invoke('graceful') #1 /usr/share/openmediavault/engined/rpc/config.inc(198): OMVModuleApache->startService() #2 [internal function]: OMVRpcServiceConfig->applyChanges(Array, Array) #3 /usr/share/php/openmediavault/rpcservice.inc(125): call_user_func_array(Array, Array) #4 /usr/share/openmediavault/engined/rpc/config.inc(247): OMVRpcServiceAbstract->callMethod('applyChanges', Array, Array) #5 [internal function]: OMVRpcServiceConfig->applyChangesBg(Array, Array) #6 /usr/share/php/openmediavault/rpcservice.inc(125): call_user_func_array(Array, Array) #7 /usr/share/php/openmediavault/rpc.inc(62): OMVRpcServiceAbstract->callMethod('applyChangesBg', Array, Array) #8 /usr/sbin/omv-engined(495): OMVRpc::exec('Config', 'applyChangesBg', Array, Array, 1)

ryecoaaron · 24. November 2013

There is an update. Do you have 0.5.0 or 0.5.1 installed? Haven't tried it myself.

NAST · 24. November 2013

Zitat von "ryecoaaron"

There is an update. Do you have 0.5.0 or 0.5.1 installed? Haven't tried it myself.

As stated I just have tried it and the plugin list did say 0.5.1...

Code

...owncloud_5.0.13-1_all.deb...

Is what I see during the install...
Now I attempt an reinstall of the owncloud plugin,..let's see..

NAST

ryecoaaron · 24. November 2013

I think Volker pulled it because I don't have it in my list even after a reboot.

NAST · 24. November 2013

Zitat von "ryecoaaron"

I think Volker pulled it because I don't have it in my list even after a reboot.

Well, the plugin is still with me - I did reinstall - which went ok but I leave it for now disabled.
I also could they hit the apply button w/o any trouble...

Wonder why I always seem to stumble across that kind of issues... lately.
Thanks for the quick replies though !

NAST

ryecoaaron · 24. November 2013

Maybe you need to a couple of days before installing new plugins or try them on a virtual machine first Let the bugs get worked out

NAST · 24. November 2013

Zitat von "ryecoaaron"

Maybe you need to a couple of days before installing new plugins or try them on a virtual machine first Let the bugs get worked out

Quite right - but I thought there would some kind of testing repo which there is for 3rd party plugins.. I believe.
But it seems that there is not one for the default plugins... funny.

I know things can break... !
But I am glad to know that it is being worked on..

NAST

tekkb · 24. November 2013

I think he must almost be done.

NAST · 24. November 2013

For now it broke my machine - at least I can not access the GUI after a reboot.
I did try to remove the plug in though...

Even after some tinkering - the installation is dead ... like a dead horse...
The advertised IP does do anything.

The log shows some errors.. apache 2 does not start..

So be careful,
NAST

NAST · 24. November 2013

Anything that can be done to fix this!?

Thanks,
NAST

ryecoaaron · 24. November 2013

apt-get remove --purge openmediavault-owncloud
rm -rfv /etc/apache2/openmediavault-webgui.d/owncloud.conf /etc/apache2/sites-available/openmediavault-owncloud /var/www/owncloud

NAST · 24. November 2013

Zitat von "ryecoaaron"

apt-get remove --purge openmediavault-owncloud
rm -rfv /etc/apache2/openmediavault-webgui.d/owncloud.conf /etc/apache2/sites-available/openmediavault-owncloud /var/www/owncloud

Thanks for the advice
I did as prescribed a bunch of directories got removed - but it did not bring the GUI back... same as before.
Some apache2 still failing...

Any further idea?

NAST

subzeroin · 24. November 2013

What does

Code

apache2ctl configtest

say?

NAST · 24. November 2013

Zitat von "subzeroin"
What does
Code
apache2ctl configtest
say?

it brought something like:

Code

SYNTAX ok

Before that I ran all commands again... individually and carfully typed...
after an

Code

ap-get autoremove

and a reboot the GUI is back!

I might have had a typo... before.
Thanks, guys!

NAST

NAST · 25. November 2013

Just saw that the owncloud plugin is still there...
Has it been fixed already?

NAST

ryecoaaron · 25. November 2013

Not on my systems. Must still be in a list somewhere.

NAST · 25. November 2013

Zitat von "ryecoaaron"

Not on my systems. Must still be in a list somewhere.

I mean in the plugin list - it is there... I suppose if you install it,,it won't show in services until reboot.

NAST

ryecoaaron · 25. November 2013

I meant in a dpkg list in /var/apt/dpkg/lists/. It still doesn't show up even after reboot.

NAST · 25. November 2013

Zitat von "ryecoaaron"

I meant in a dpkg list in /var/apt/dpkg/lists/. It still doesn't show up even after reboot.

Honestly I have it in the list --> GUI.
And it can even be installed...but not enabled...maybe some residue...

NAST

Jetzt mitmachen!