RPI Loses Connection With Mounted Drives And Keeps Failing

1. offizieller Beitrag

    My problem is:

    Everytime when i use a little bit too much the monted drives, they stopping working correctly.

    After a short amount of time, and a few reboots, they restoring succesfully.

    When they failing i got this messages in the system log:


    monit[2852]:'mountpoint_srv_disk-by-label-HDD2'status failed (1) -- /srv/dev-disk-by-label-HDD2 is not a mountpoint.

    monit[2852]:'filesystem_srv_dev-disk-by-label-HDD2' trying to restart.

    monit[2852]:'filesystem_srv_dev-disk-by-label-HDD2' unable to read filesystem 'srv/dev/dsik-by-label-HDD2' state.

    monit[2852]:'mountpoint_srv_disk-by-label-HDD2' not mounted.


    update: ~recently from yesterday this method doesnt working at all.

    Please help im very desperate.||

    Thanks.

    • Offizieller Beitrag

    I would boot into a linux live distro on a laptop or desktop and check if the data are still there. Then you can use the drive(s) "a little bit too much" to see if the issue is related to the drive or the Pi.

    If the drives work fine on the laptop, the issue should be the Pi.

    Could be broken or just not up to what you expect from it.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!

Benutzerkonto erstellen Anmelden