Am I right with thinking, that both won't work together?
your post is somewhat confusing, what did you have installed on your Pi before installing OMV5, as there is a guide here on how to install OMV5 on SBC's
You can use pihole parallel to OMV, but you have to change the port of one of them as both are using port 80 in standard configuration.
Alternative is to use pihole in docker with a macvlan network. There is a guide as well.
There is a guide as well
Mind to share the link, please?
Here it comes (along with the other guides from crashtest )
https://github.com/OpenMediaVault-Plugin-Developers/docs
Here a docker-compose file for pihole with macvlan
version: "2"
networks:
pihole_network: # Name of network
driver: macvlan # Use the macvlan network driver
driver_opts:
parent: enx001e0630eb7b # Name of the Network Interface (check in OMV GUI in Network >> Interfaces >> Name
ipam:
config:
- subnet: 192.168.0.0/24 # Specify subnet
gateway: 192.168.0.1 # Gateway address / address of router
# ip-range: 192.168.0.192/28 # Available IP addresses
services:
pihole:
container_name: pihole # We name our container here
image: pihole/pihole:latest # Version 4.1 works with the required cap_add section
hostname: pihole_docker # Containers hostname (optional)
cap_add:
- NET_ADMIN # This is required for version 4.1 onwards
networks:
- pihole_network # Same name of network defined above
dns:
- 127.0.0.1 # first DNS must be this according to documentation on hub.dooker.com
- 1.0.0.1
ports:
- 443/tcp
- 53/tcp
- 53/udp
- 67/udp
- 80/tcp
# Volumes store your data between container upgrades
volumes:
- /srv/dev-disk-by-label-odroid/docker/docker_config/etc-pihole/:/etc/pihole/
- /srv/dev-disk-by-label-odroid/docker/docker_config/etc-dnsmasq.d/:/etc/dnsmasq.d/
labels:
- com.centurylinklabs.watchtower.enable=False # watchtower will not update this docker
environment: # Optional environment configuration
ServerIP: 192.168.0.2 # IP of pihole
WEBPASSWORD: "abc" # password to enter the admin page; can be changed later
restart: unless-stopped # Set container to always restart unless stoppedOMV5 and Pihole runs fine side by side. Simplest way is to change the default port of OMV from 80 to 8080 or whatever you want.
I run it like that on a nanopi neo (Armbian, OMV5, Pihole+Unbound).
No the same result like using apt-get install.
No it isn't that hard, I only thought thats the RASPI can do more than PiHole
and I hate when things not running.
Nevertheless "Thank You"
and I hate when things not running
This simply works, follow the guide to install on the Pi, then install docker, then portainer, then pi-hole, installing anything else prior will mess with the install of OMV
OMV5 and Pihole runs fine side by side. Simplest way is to change the default port of OMV from 80 to 8080 or whatever you want.
I run it like that on a nanopi neo (Armbian, OMV5, Pihole+Unbound).
How do I change the OMV4 port ? After installing I cant reach the OMV page anymore.
before installing Pihole, you can change OMV port from webGUI.
PD: you have a tool called omvfirstaid that can be used to revert port of OMV WEBGUI, but you need to rum from shell.
Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!
