Hello to everything!
I installed some weeks ago (from clean) the latest version of omv 5.0 (i come from the old 4) and i can use it normally.
I have only one problem ... i can't spindown the disks automatically (3 disks).
In previous build, i used the power management from web interface (hdparam) (with 127 for APM and 60 minutes for spin down value) and it worked all normally.
I tried to disable all value and install hd-idle (also the modified version of adelolmo) how it was suggested in the guide of forum ... but i can't have poweroff of disks.
I put the simplest value for hd-idle (HD_IDLE_OPTS="-i 3600"), but without success!
If i put for try, a low value (60 second), the disks spindown after restart of hd-idle services.
When disks doesn't spindown, if i lauch command "hd-idle -t sda" (and others sdx) , disks spindown and they doesn't wake up ... so it isn't something that access disks and prevent for standby
Is strange that initially, after the installation, hd-idle worked... but now not!)
I read all posts in forum, but nothing help!
What i can watch for understand what happens?
P.S. The disks are 2 WD red and 1 seagate disk
P.P.S. Of course service of hd-idle is active and running (i can see status with systemctl status hd-idle)
Thank you very much
Marco