New Installation advice

1. offizieller Beitrag

    Hi everyone

    New poster here


    This is what I have an RPI4 thats been updated to boot off a USB ssd drive. It seems to work ok at the moemnt but I have to admit I am a bit lost as to what I should do next. I have 2 480gb SSD that are in a drive enclosure support usb3.


    I would really like to know what to do My plan is to have the 1st SSD which is 120gb drive as the system and the two new 480gb ssd drives 2+3 as the storage for the network, peoples files and anything else I might want.


    Would the first thing be to use the flash memory plugin before I install the other 2 drives.

    • Offizieller Beitrag

    Welcome to OMV!!!

    If you installed OMV with the installation script, the flashmemory-plugin most likely is already installed.

    You could as well run OMV from a SD card. Many users here do it like this. I do it on my HC2 as well.


    Have you seen the "new users guide"? It is linked in my signature.

    In case you cannot see any signature, you can enable it in your profile.

Jetzt mitmachen!

Sie haben noch kein Benutzerkonto auf unserer Seite? Registrieren Sie sich kostenlos und nehmen Sie an unserer Community teil!

Benutzerkonto erstellen Anmelden