Clone 320GB HDD to 64GB SDD

  • I can make no sense of them.

    OK I'll explain them in detail

    From OMV Boot into CloneZilla

    enter on Enter_Shell> CMD

    in the shell I type (sudo su)

    then type (fdisk -l)

    check how the discs are indicated

    sdb 320GB sda 64GB

    then type the DD command

    (dd if = / dev / sdb of = / dev / sda bs = 512 count = 1)

    Reboot

    Boot into CloneZilla

    enter on Enter_Shell> CMD

    I write (sui ^ c) send and type (sudo su) and again (fdisk -l)

    I check the screen if everything is ok

    and finally (fdisk / de ^ c) then exit again exit

    start clonezilla

    send on "device-device mode"

    then on "beginner"

    below on "part_to_local_part"

    I select HDD sdb1 as source, SSD sda1 as destination

    skip checking / repairing source file system

    yes twice

    rerun

    device-device mode

    beginner

    part_to_local_part

    sdb2 as source

    sda2 as destination

    skip checking / repairing source file system

    yes twice


    Remove CloneZilla

    Reboot

    I hope it all works out


    you understand now?

  • You are taking what could be one line of shell code and turning it into I do not know what.


    Sorry, but if you want to continue on the path you are on now I can't help you.

    --
    Google is your friend and Bob's your uncle!


    OMV AMD64 5.x on Chenbro NR12000 1U 1x 8m Quad Core E3-1220 3.1GHz 16GB ECC RAM.

  • You are taking what could be one line of shell code and turning it into I do not know what.


    Sorry, but if you want to continue on the path you are on now I can't help you.

    After reducing the size of the HDD partition, I connected the SSD to the machine's motherboard and restarted the machine in the Clonezilla utility, entered the Bash shell interface and checked both the disk partition table and the dimensions using the following commands.

    # fdisk -l /dev/sda

    # fdisk -l /dev /sdb

    here I have taken note of the position of the disks

    sda 64GB SSD sdb HDD 320GB

    then I entered the dd command

    # dd if=/dev/sdb of=/dev/sda bs=512 count=1

    After cloning the MBR, I ran the fdisk -l command again to check if the partition table matches on both disks.

    I quit the Bash shell

    with the exit command

    Now, that's all right, I started the Clonezilla utility, I selected the device-device mode, run the wizard for beginners and select the part-to-local_part cloning option.

    I chose the first local partition from the list (sdb1 - System Reserved) as the source and I pressed the Enter key to continue.

    So, I chose the local destination partition, which will be the first partition from the second disk, (sda1) and I hit the Enter key to continue.

    In the next screen I chose Ignore check/repair file system and I pressed the Enter key again to continue.

    Finally, I hit the Enter key again to continue and I twice answered with yes (y) to accept the warnings and start the cloning process.

    when it was finished I turned it off I removed the HDD physically from the PC,

    and I booted with SSD and it worked perfectly


    Thank you so much gderf for making me reason, on all the steps to do

  • Here is your one line of shell code, now that you know which disk is which:


    dd if=/dev/sdb of=/dev/sda bs=1M status=progress

    --
    Google is your friend and Bob's your uncle!


    OMV AMD64 5.x on Chenbro NR12000 1U 1x 8m Quad Core E3-1220 3.1GHz 16GB ECC RAM.

Participate now!

Don’t have an account yet? Register yourself now and be a part of our community!