Migrating from FreeNAS to Open Media Vault while also importing FreeNAS ZFS to ZFS on Linux - Roadmap Advice sought please

need anything else? Thanks.

no, and I can't help, with those version numbers, import must works, so i do not know whats the problem is.

Zitat von geaves

According to this output com.delphix:log_spacemap which was set on Freenas and the information on the support table this pool will only import as read only

sorry you are right i confuse to line:

com.delphix:spacemap_histogram that can be imported in R/W mode

alright how about this, I have imported read only, now copying over 25tb of data to a regular non zfs raid array temporary. I will then delete zfs array create a raid 6 array and copy data over. Once this is done what is the best way to switch back to the most current kernel? Currently using proxmox kernel

proxmox kernell is the recommended kernell to use ZFS

Hi Guys,

I am in the same boat.

Moving from TrueNAS to OpenMediaVault.

Installed the latest version on Debian.

Have everything configured and running.

I managed to install zfs and import the pools with the command "zpool import -f PoolName" since import from the GUI was giving errors.

I am just having issues accessing the Data already on the disks.

If i create a shared folder it gets created and i am able to write data on the folder. But i am not able to browse the data already on the pool.

What am i missing. What do i need to do to be able to access the data already stored on the pools.

Best regards,

Adeel Akram

post zpool status to see if your pool need to be upgraded

Hi raulfg3,

Below is the output for zpool status for the two pools:

root@OpenMediaVault:~# zpool status Data

pool: Data

state: ONLINE

status: Some supported features are not enabled on the pool. The pool can

still be used, but some features are unavailable.

action: Enable all features using 'zpool upgrade'. Once this is done,

the pool may no longer be accessible by software that does not support

the features. See zpool-features(5) for details.

scan: scrub repaired 0B in 04:07:05 with 0 errors on Sun Dec 27 04:07:09 2020

config:

NAME STATE READ WRITE CKSUM

Data ONLINE 0 0 0

sdb ONLINE 0 0 0

errors: No known data errors

root@OpenMediaVault:~# zpool status Replica

pool: Replica

state: ONLINE

status: Some supported features are not enabled on the pool. The pool can

still be used, but some features are unavailable.

action: Enable all features using 'zpool upgrade'. Once this is done,

the pool may no longer be accessible by software that does not support

the features. See zpool-features(5) for details.

scan: scrub repaired 0B in 00:06:21 with 0 errors on Sun Dec 27 00:06:27 2020

config:

NAME STATE READ WRITE CKSUM

Replica ONLINE 0 0 0

sdc ONLINE 0 0 0

errors: No known data errors

Best regards,

Adeel Akram

you have 2 pools , each pool with only one disk on it, correct?.

please consider to have a backup before to upgrade your pool, because you cant revert to old ZFS version.

do a zpool upgrade poolname to upgrade your pòols, reboot your NAS, do a zpool status to be sure that no more warnnings on zpool.

test again, must work.

PD: revise first your permission on that pool, owner must be root an group must be users, perhaps you can have correct permission and your browser problems are because this.

Hi raulfg3,

Yes, i have two disks, each pool with only 1 disk. I am not using ZFS RAID. I use rsync to replicate only the important data on to another disk.

I am just testing these two disks first before moving the other two to this storage. The data on these disks is also backed up.

I did the zpool upgrade on one of the disks as you suggested. But that was actually not the issue. I just was not sure how to share the data that was on the pools. Since its been only a few days that i have started using OpenMediaVault.

After i created shared folders and mapped folders on the Pool with the created shared folder and assigned them to an SMB share i was able to access the data on the pool. I still get permission errors when adding the existing folders but things seem to be working since i am able to read and write data in the folders. Is there an easy way to get rid of all these permission errors.

Below is the error that i get when adding the existing folders:

OMV\Exception: Failed to set file mode to '42775' for '/Backups/Backups/':

Failed to set file mode to '42775' for '/Backups/Backups/':

Below error when i try to Modify Shared folder ACL:

Failed to execute command 'export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin; export LANG=C.UTF-8; setfacl --remove-all -M '/tmp/setfaclhYnFHV' -- '/Backups/Backups/' 2>&1' with exit code '1': setfacl: /Backups/Backups/: Operation not supported

Thanks crashtest,

I ran the the commands through ssh using putty on two of the pools. But it does not seem to have any effect.

I can browse all the files that are on the pool. But i can not delete any files.

Is there any way to recursively change permission on all files and folders so that i can modify and delete them as well.

Best regards,

Adeel Akram

Also i can not seem to delete the highlighted unwanted folders that became visible once i imported the pool from one of the pools.

Same folders were visible on other pools as well but i was able to delete them one by one from the ZFS tab.

I Get the below error when i try to delete them.

No such Mntent exists

Error #0:
OMVModuleZFSException: No such Mntent exists in /usr/share/omvzfs/Utils.php:84
Stack trace:
#0 /usr/share/openmediavault/engined/rpc/zfs.inc(253): OMVModuleZFSUtil::deleteOMVMntEnt(Array, Object(OMVModuleZFSFilesystem))
#1 [internal function]: OMVRpcServiceZFS->deleteObject(Array, Array)
#2 /usr/share/php/openmediavault/rpc/serviceabstract.inc(123): call_user_func_array(Array, Array)
#3 /usr/share/php/openmediavault/rpc/rpc.inc(86): OMV\Rpc\ServiceAbstract->callMethod('deleteObject', Array, Array)
#4 /usr/sbin/omv-engined(537): OMV\Rpc\Rpc::call('ZFS', 'deleteObject', Array, Array, 1)
#5 {main}

Thanks crashtest,

The zfs destroy Data/.system -r command worked perfectly. (ZFS Tab looks all clean now )

I already created each shared folder for each ZFS pool as you suggested to give a structure to things. Created another folder with Same name as the pool in each ZFS pool and put all folders inside the same name folder. I then created an SMB share with this folder. All looks nice and clear in the network shares now. With each shared folder having the same name as the ZFS pool.

Below is what my ACL window looks like:

I selected the below options as you suggested:

But after a while i get errors similar to below error on all files and folders in the share:

setfacl: /Backups/Backups/: Operation not permitted

Best regards,

Adeel Akram